Tender For Provision Of Guard Room Complex At Main Gate Of Minnie Bay Under Age B/R-I And special Repair To Drain Around Mt Section And Raqas At installation Utkrosh Under Ge Minniebay, Sri Vijaya Puram (8877/E8)
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
19 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Guard Room Complex At Main Gate Of Minnie Bay Under Age B/R-I And special Repair To Drain Around Mt Section And Raqas At installation Utkrosh Under Ge Minniebay, Sri Vijaya Puram (8877/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5 m and n exc 3.00m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | M&L for Plain Cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations,filling and mass concrete complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 5 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 6 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces complete all as specified and as directed. |
| 7 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 8 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings.chajjas and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 9 | Use and Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of concrete complete all as specified and as directed |
| 10 | M&L RCC M30 grade (Nominal Mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams; bases for coloumns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 11 | M&L RCC M30 grade (Nominal Mix) using 20mm graded stone aggregate as in columns, pillars, piers, post and struts etc complete all as specified and directed. |
| 12 | M&L RCC M30 grade (Nominal Mix) using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | M&L RCC M30 grade (Nominal Mix) using 20mm graded stone aggregate Beams, cantilevers,bressummers, lintels over 1.5m span and the like complete all as specified and directed. |
| 14 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to TMT bars complete all as specified and directed. |
| 15 | M&L for High Strength deformed TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed |
| 16 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed |
| 17 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed. |
| 18 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M & L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement. complete all as specified and directed. |
| 20 | M&L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer and 2mm thk wall care putty complete all as specified and as directed. Note :- Wall care putty can be measured and paid separately |
| 21 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 22 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and directed. |
| 23 | M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming (Beam, tee, angle, Channel, hollow sec or flat sections) including distance pieces, cleates, gusset paltes etc Fe 410-w grade E-250 quality A complete all as specified and directed. |
| 24 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and directed. |
| 25 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed. |
| 26 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed. |
| 27 | S&F aluminium flat 40 X 6mm size as wind tie fixed with 50mm/75mm aluminium self staging screws complete all as specified and directed. |
| 28 | S& F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe.410 W (Gde E 250 Quality B) complete all as specified and directed. |
| 29 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed. |
| 30 | S&Fpowder coated anodised aluminimum frames or shutter for doors, partititons, windows and ventilators and similar works with one or more rebates incl necessary fittings and fixtures such as jointing cleats, glazing clips, rubber packings, screws, hanldes stainless steel adjustable friction stay hines etc., as required fixed to aluminimum frame complete all as specified. Note: (i) Unit rate quoted shall deemed to inlclude cost of rubber beading, fittings such as handles, SS friction stay hines and fixing of glass wire and cloth decogrill etc., (ii) Glass wire cloth and grill to be measured and paid separately. |
| 31 | S & F only 4 mm Plain sheet glass ordinary quality, in square not exc 0.5 sqm each complete all as specified and as directed. |
| 32 | S & F only 4 mm Plain sheet glass ordinary quality, in square exc 0.5 sqm each complete all as specified and as directed. |
| 33 | S&F in 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed as in panels of Aluminium door shutters, partition etc complete all as specified and directed. |
| 34 | S & F only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down complete all as specified and as directed. |
| 35 | S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between61 to 80 kg and fixed complete all as specified and as directed. |
| 36 | S & F Floor Door Stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 37 | M&L for preparation of new steel surfaces over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 38 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in sub base for flooring/levelling coarse etc complete all as specified and as directed. |
| 39 | M&L for Double Charged light Vitrified ceramic coloured tiles 10mm thick (Square/rectangular) area of each tile not exceeding 0.36sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. |
| 40 | M&L for ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. |
| 41 | -Ditto- all as per item No 40 here-in-before but in vertical surface (dado/skirting) to match the shade of floor tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed. |
| 42 | M&L for glazed ceramic tiles 350 x 250x 7mm / 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed. |
| 43 | M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 44 | M & L for 100 mm thick, PCC 1:4:8, Type D-2 (ditto), using 40mm graded aggregate as in Sub base complete all as specified and as directed. |
| 45 | Material and labour for 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, complete all as specified and as directed. |
| 46 | M & L for Heavy duty Vitrified Chequered cement concrete tiles 30cm x 30cm x 10 mm thick, set, jointed and pointed in near cement slurry in floors With grey cement and pigments and including screed bed 15mm thick CM 1:4 complete all as specified and directed. |
| 47 | Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified and as directed. |
| 48 | Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified and as directed. |
| 49 | M&L Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and as directed. |
| 50 | S&F Vitreous China wash down water closet pan (pedestal pattern) of size 380x610x805mm Rimless bowl with cistern for coupled, WC with UF soft close slim seat cover hinges, dual flush cistern fitting, conversion bend , fixing accessories and accessories set complete all as specified and as directed. Model No: Jaquar VGS-WHT 81753S250UFSMZ |
| 51 | S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets with PVC connections 15mm/20mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 52 | S&F in repairs brass chromium plated Hand shower (Health Faucet)(ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and as directed. Make Prayag-Cat No-BEA-87 |
| 53 | S&f 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 54 | S&F in repairs Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore.Make Prayag-Cat No-9210 complete all as specified and as directed. |
| 55 | S&F in repairs two way bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore.Make Prayag-Cat No-8112 complete all as specified and as directed. |
| 56 | S&F in repair Pillar taps, cast copper alloy chromium plated, fancy type, screwed down, high pressure with long screwed shanks and fly nut of 15/20mm bore complete all as specified and as directed. |
| 57 | S&F in repair CP Toilet paper holder fancy type high quality complete all as specified and as directed. Make : ACN-1151N of Jaquar |
| 58 | S&F in repairs bib tap long body with flange chromium plated screwed for 15mm bore of Make-Prayag |
| 59 | S/F towel rail 600mm long with flanges, chromium plated etc., of make-Jaquar complete all as specified and directed. |
| 60 | S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank, Geyser etc, complete all as specified and as directed. |
| 61 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement and in cement concrete 1:2:4 type B1 complete all as specified and as directed. |
| 62 | S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 63 | S & F 32mm pvc waste pipe for drain out from wash basins and fixing to waste coupling complete all as specified and as directed |
| 64 | Waste coupling of PTMT (half or full threaded) suitable for urinal complete all as specified and as directed. Note :- Minimum weight 32mm45gms/40mm-60 gms |
| 65 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or as in floors complete all as specified and as directed. |
| 66 | S & F 110mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 67 | S & F 110 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 68 | S&F PVC (SWR) bends with access door 110mm dia complete all as specified and as directed. |
| 69 | S&F PVC (SWR) P trap complete all as specified and directed. |
| 70 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified. |
| 71 | Demolition of Pecast concrete articles and precast concrete block walling any description any position all as specified. |
| 72 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed |
| 73 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified. |
| 74 | M&L PCC (1:2:4) Type-B0 (using 12.50 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and as directed (on top of area drain wall). |
| 75 | M&L for rendering 15mm thick plaster in CM (1:4) on brick/PCC block wall or concrete surfaces finished even & smooth (without using extra cement) complete all as specified and as directed. |
| 76 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. |
| 77 | M&L for 100 mm bore UPVC (SWR) pipes as in weep holes complete all as specified and directed by Engineer in charge. |
| 78 | M&L for PCC ( 1:3:6 ) Type C2 using 40mm graded stone agg as in surface channels & drain all as specified and directed. |
| 79 | Demolition of RCC [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for etc., complete all as specified and as directed. |
| 80 | M&L for precast cover slab with ( 1:2:4) type B1 using 20mm graded stone aggregate set in CM (1:4) incl cost of use and wastage of clean sawn wooden form work but excl cost of reinforcement complete all as specified and as directedNote : TMT bars shall be measured and paid separately |
| 81 | M&L for cleaning of existing area drainage by de-silting mud, vegetation, debries, waste materials deposits etc, cleaning/removing manually/mechanically up to a depth n.exc 1.5 mtr as directed and removing the materials outside MD land complete all as specified and as directed. |
| 82 | Cleaning of drains by destiling mud, vegetation, debries waste materials deposits etc, cleaning/removing manually/mechanically up to a depth of 60 cm and removing the materials outside MOD land all as directed. |
| 83 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) etc., complete all as specified and as directed. |
| 84 | M&L Hardcore with brocken stone or boulders of gauge n.exc 63 mm , deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 85 | M&L for 75mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.finishing the surface even & smoth without using extra cement all as directed. |
| 86 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 87 | Removal and refixing of RCC drain cover any thickness and size for repair and desilting on area drainage any description with mannually or mechanically with complete safety arrangements etc all as specified and directed.Note : Repair and desilting measured on respective item of schedule. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender