Tender For special Repair To Area Drainage And Path At Rsv Under Age Br-Ii Of Ge (West) Lucknow
Tender Value
38.14 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
76280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Area Drainage And Path At Rsv Under Age Br-Ii Of Ge (West) Lucknow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Sep-2026 | Corrigendum | Other | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in any type of soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out of soft/loose soil complete all as specified and directed. |
| 2 | M&L for cement concrete 1:3:6, type D2 (using 40 mm graded aggregate) in foundations / fillings as mass concrete complete all as specified and directed. |
| 3 | Demolition of brick work or stone/ boulder masonry/PCC block masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc complete all as specified and directed. |
| 4 | S&F of precast U-shape drain without lid cover of size 450 mm (width) x 450 mm (depth) (from inner side of drain) x 2000 mm (length) and 610 mm (width) x 525 mm (depth) (from outer side of drain) made with Fe 500/550D grade TMT steel reinforcement bars in each unit made of high performance self compacting concrete (SCC) of M-40 grade. cured under controlled factory conditions through steam curing.having loading capacity of 5 kn/sqm with precast cover to carry load (light motor vehicle loading etc) all manufacturing process must comply with Indian standards. the curing process must be maintained using RO water and chiller plants to avoid efflorescence for quality assurance. the formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components, concrete mix design as per IS-9103 with weight of each drain unit (without lid cover) atleast 560 kg (tolerance limit 3%) complete all as specified and directed by Engr-in-charge. Note: (i) The work pertaining to precast article shall be executed by the contractor as per MoU from authorised technician through manufacturer of the precast factory. The sample of MoU is enclosed as per Appx 'F'. The contractor is advised quote their rate accordingly.(ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 5 | S&F of precast perforated lid cover for U-shape drain 450mm (width) drain of 500mm (length) x 70mm (thickness) made with Fe 500/550D grade TMT steel reinforcement bars in each unit made of high performance self compacting concrete (SCC) of M-40 grade, cured under controlled factory conditions through steam curing. having loading capacity of 5 kn/m.so. (light motor vehicle loading) all manufacturing process must comply with Indian standards, the curing process must be maintained using RO water and chiller plants to avoid efflorescence for quality assurance, the formwork used for casting should be made automobile grade water tight steel enabling the production of highly accurate and consistent components, concrete mix design as per IS-9103 with weight of each lid cover atleast 50 kg (tolerance limit 3%) complete all as specified and directed by Engr-in-charge. Note: (i) The work pertaining to precast article shall be executed by the contractor as per MoU from authorised technician through manufacturer of the precast factory. The sample of MoU is enclosed as per Appx 'F'. The contractor is advised quote their rate accordingly.(ii) The contractor shall upload with the documents under Cover-I \\"Memorandum of Understanding: (MoU) with Rs 100/- Stamp paper at least one manufacturers, failing which the bid shall be liable to be rejected. |
| 6 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 7 | M&L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 9 | M & L cement concrete 1:2:4, type B-0 (using 12 .5 mm graded stone agg) as in coping plinth course and the like incl weathering slightly rounded or chamfered angle and throating and neccesary formwork complete all as specified and directed. |
| 10 | S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors with all fittings complete all as specified and directed. |
| 11 | M&l for PCC 1:4:8, type D-2 (using 40mm graded stone agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after pipes they are laid and tested, internal dia of pipes 110mm bore complete all as specified and directed. |
| 12 | Providing and laying hard core broken stone/ boulders to gauge n exc 63 mm complete all as specified and directed. |
| 13 | M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed |
| 14 | M & L for 60 mm coloured machine pressed rubber moulded precast concrete interlocking paver block incl any shape and size having double glossy finish top layer with in colour (Red/yellow) M-35 Grade grey cement and pigment including demolition of existing paver blocks complete all as specified and directed. |
| 15 | M & L for sand filling under paver blocks/floors or in foundations including watering and consolidation complete all as specified and directed. Please Enable Macros to View BoQ information |
| 16 | M & L for sand filling under paver blocks/floors or in foundations including watering and consolidation complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender