Tender For special Repair To Qtr No 5/1 And 6/3 At Rak Sf-In In The Area Of Age B/R-I Under Ge (West) Lucknow.
Tender Value
33.77 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
67600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Qtr No 5/1 And 6/3 At Rak Sf-In In The Area Of Age B/R-I Under Ge (West) Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (WEST ) Lucknow Name of Work : Spl Repair to Qtr No 5/1 and 6/3 at RAK SF-In in the area of AGE B/R-I under GE (WEST) Lucknow. Contract No: GE/W/LKO/T-85 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed. |
| 3 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 4 | M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 5 | M & L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work in walls and finishing the surfaces even and fair complete all as specified and directed. |
| 6 | Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, complete all as specified and directed. |
| 7 | M & L for 5 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed. |
| 8 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed. |
| 9 | M&L for non skid matt finished floor tile (coloured) 400x400x20 to 25mm thick (square) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed. |
| 10 | M&L for glazed ceramic tiles (coloured) 300 x 600 x 7 to 8mm / 600 x 1200 x 7 to 8 mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and directed. |
| 11 | M&L Virified Ceramic tiles Double Charge10 mm thick (square/ rectangular) polished, area of each tiles n exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed. |
| 12 | Ditto all as per item No-10 above but as in vertical surfaces as in dado/skirting with and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 13 | M&L 18-20mm thick granite stone slab, machine cut and as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed. |
| 14 | M & L for 20mm thick granite stone slab as in cooking platform,window cill over and including 15mm thick screed bed in CM 1:6 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and directed. |
| 15 | M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and directed. |
| 16 | Demolition of RCC as in lintel, shelves etc nexc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 17 | M & L for RCC 1:1.5:3, type A1( using 20mm graded stone aggregate) in RCC lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed. |
| 18 | M & L for Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 19 | Taking down steel tubing and connections and fittings 15mm bore including cleaning for refixing or removing from site complete all as specified and directed. |
| 20 | Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and directed. |
| 21 | M & L for GI tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor complete all as specified and directed. |
| 22 | M & L for GI tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor complete all as specified and directed. |
| 23 | M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth complete all as specified and directed. |
| 24 | Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 25 | S & F PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints , fixed to walls complete all as specified and directed. |
| 26 | S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 27 | S & F PVC (SWR) bends any radius 110mm dia complete all as specified and directed. |
| 28 | S & F PVC (SWR) single TEE equal 110mm dia complete all as specified and directed. |
| 29 | S & F PVC (SWR) bends any radius 75mm dia complete all as specified and directed. |
| 30 | S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed. |
| 31 | Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed. |
| 32 | S & F in repair vitreous china wash down water closet (pedestal pattern) pan white and including plastic seat cover (white) with “P” or “S” trap and connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed. |
| 33 | S & F in repair CP cast copper alloy central hole wash hand basin mixer,fancy type,brass chromium plated, with round spout with waste system , including plugging and fixed, suitable of 15 mm bore pipe all complete as per the direction of Engineer-in-Charge. |
| 34 | S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe, all complete as per the direction of Engineer-in-Charge. |
| 35 | S & F cast copper alloy bib taps CP cast copper alloy fancy type chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed. |
| 36 | S & F in repair CP Stop valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed. |
| 37 | S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union as directed. |
| 38 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall as directed. |
| 39 | S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified |
| 40 | S & F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections & fixed in position complete as specified superior quality all complete as per the direction of Engineer-in-Charge. |
| 41 | S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality. |
| 42 | S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed. |
| 43 | S & F in repair CP Brass Tabular Towel Rail, 20mm dia D type 60cm long between flanges complete set of superior quality. |
| 44 | S & F in repair looking mirror of size 600 x 450mm of 6 to 8 mm thick fixed with stainless steel studs complete all as specified and directed. |
| 45 | S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed. |
| 46 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long complete all as specified and directed |
| 47 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all complete as per the direction of Engineer-in-Charge. |
| 48 | Supply and fixing in repairs stainless steel peg set (06 Nos hook) etc complete all as specified and directed. |
| 49 | S & F in repair double bowl kitchen sink with drainage board made out of stainless steel 1mm thick with plug washer waste coupling waste pipe incl bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 50 | S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed. |
| 51 | S & F in repair rotantional moulded polythylene water storage tanks tripal layered (ISI marked) 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 52 | S & F in repair rotantional moulded polythylene water storage tanks tripal layered (ISI marked) 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed. |
| 53 | S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed. |
| 54 | S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 55 | S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 56 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites directed. |
| 57 | All as item No 55 above but exc 1.5 Sqm but n.exc 4 Sqm Each. |
| 58 | S & F Second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed. |
| 59 | S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed. |
| 60 | S & F 30mm thick second class hard wood glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauge etc (devided into panels with plain sash bars any numbers) edges of framing plain, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I. |
| 61 | Supply and fixing Solid PVC Double Door Frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed. |
| 62 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 63 | S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed. |
| 64 | S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed.. |
| 65 | Providing and fixing of Double rebate windows & ventilators made of High-performance factorymade system Aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for Outer frame should be of 91mm x 35mm, Glass shutter frame shall be of 54mm x 30mm, Mesh shutter frame shall be of 54mm x 30mm, 5mm thick Single Glazed beading shall be of 15mm x 18mm. 5mm thick Clear Glass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. 10mm Sq bar M.S. Grill/Guard bar with 150mm c/c shall be fixed in between glass & mesh shutter. All frame corners shall be joined/assembled using self-locating corner cleats (No screwing at corners shall be allowed). All Hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window Frame complete in all respect including all taxes.NOTE:- The work for System Aluminium window/ventilators shall including the following and the rates quoted by the bidders accordingly:- (a) The work pertaining to System Aluminium window/ventilators shall be executed by the contractor as per MoU from authorised technician through manufacturer of the materials as pertains to System Aluminium window/ventilators after approval by the GE. (ii) The contracor shall upload with the documents under Cover-I \\"Memorandum of Understanding : (MoU) with Rs 100/- Stamp paper at least one manufacturers, failling which the bid shall be liable to be rejected. |
| 66 | S & F Aluminium Butt hinges, 100mm size complete all as specified and directed. |
| 67 | S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed. |
| 68 | S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed. |
| 69 | S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed. |
| 70 | S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed 140 MM Overall length of cover plate. |
| 71 | S & F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as spacified and directed. |
| 72 | Supply and fixing 100mm size Decorative type, handles of stainless steel ISI marked complete all as specified and directed. |
| 73 | S&F magnet catcher heavy duty for cupboard shutter complete all as specified and directed. |
| 74 | S&F 8 to 10 mm dia anchor fastner of lentgh exc 75 mm but n. exc 150 mmlong including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed .Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt. |
| 75 | S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed. |
| 76 | S&F 4.8 mm Sheet glass,ordinary quality in square of any size complete all as specified and directed. |
| 77 | S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stanless steel staples or steel/wooden beadings to windows complete all as specified and directed. |
| 78 | S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed. |
| 79 | M & L for preparation of new surfaces of wall and applying Two coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.NOTE : The work for painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 80 | M & L for complete removal of existing treatment of old surface of wall and and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.NOTE : The work for painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 81 | M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.NOTE : The work for painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 82 | M & L for complete removal of existing treatment of old surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, complete all as specified and directed.NOTE : The work for painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 83 | M&L 1 mm thick Birla white putty on wall (two or more coats)complete all as specified and directed .NOTE : The work for painting shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to painting shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to painting after approval by the GE. (ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 84 | M & L for for preparation of new plastered ceiling surface and applying two coats of Oil bound distemper complete all as specified and directed. |
| 85 | M & L for preparation of old treated ceiling surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 86 | M & L for preparation of old treated wall surface and applying two coats of whitewash complete all as specified and directed. |
| 87 | M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 88 | M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 89 | M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint all as specified. |
| 90 | Demolition of Cement concrete (unreinforced) in ground floor and paving not exc 15cm thicknes below or above ground level complete all as specified directed |
| 91 | M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed. |
| 92 | M & L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in leveling course,padding of any thickness etc. complete all as specified and directed. |
| 93 | M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 94 | M & L for 10mm thick rendering on concrete surface in CM (1:3 ) including finished even and smooth (without using extra cement) using 100% coarse sand on roof surface including WPC as per manufacturer's instructions complete all as specified and directed. |
| 95 | M & L for cleaning of all loose dirt and dust from roof surfaces incl taking down existing water proofing treatment and applying roof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces & laying of glass fibermesh 45 gsm over tacky surface and allow it to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 2kg /SQM of pu to be applied (total comsumption) having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 96 | Cutting holes in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required for fixing purlins,rafters etc. |
| 97 | S & F in repair steel tubular section Fe-290 (Gde E-165) as in beams ,rafters,purlins and running rails and guide for sliding doors fixed with MS cleats or other connecting plates including cutting, grinding, welding etc as required complete all as specified and directed. |
| 98 | S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old Asbestos cement sheet complete all as specified and directed. |
| 99 | M&L for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) incl dismantling of old concrete.Complete all as specified and directed. |
| 100 | M & L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base incl demolition of old PCC etc complete all as specified and directed . |
| 101 | M & L for Chequered cement concrete tiles of size 20cm x 20cm x25mm thick as in floors etc set and jointed in neat cement slurry and pointed with white cement and pigments laid over and including 20mm thick screed bed or bedding layers in CM (1:6) complete all as specified and directed. |
| 102 | M & L for 400x400x20-25mm thick Exterior grade Heavy duty tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM 1:6 incl Dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 103 | M & L for Plain Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in copings complete all as specified and directed. |
| 104 | Providing post ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 105 | Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and making good disturbed surfaces even and smooth using CM 1:3 including white/colour wash to match the existing surface complete. |
| 106 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm and earth continuity conductor 1.5 sqmm colour coded drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia (ISI marked) ivory colour with all conduit fittings / fixing accessories and unwelded modular sunken galvanized pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators for one light point /fan point controlled by one switch. |
| 107 | All as Item No 105 above but one bell point controlled by one bell push |
| 108 | All as Item No 105 above but one socket outlet, 6 Amp controlled by one switch on same board with other swiches. |
| 109 | All as Item No 105 above but one socket outlet, 6 Amp controlled by one switch on an independent board . |
| 110 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm and earth continuity conductor 2.5 sqmm colour coded drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia (ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken galvanized pressed steel terminal box of thickness not less than 1.0 mm of approved colour for mounting modular switches, sockets etc as required for one 16 amp socket outlet point controlled by one switch on independent board. |
| 111 | S&F angle type holder insulated of approved make with insulated polycorbonate body with modular frame including necessary fixing accessories and electrical connections complete. |
| 112 | S&F Modular switch 1 way 10A, 1 module size of approved make ,with all necessary fixing and electrical connections complete. |
| 113 | S&F Modular switch 1 way 16A, 1 modulesize of approved make ,with all necessary fixing and electrical connections complete. |
| 114 | S&F Modular door Bell push 6A 1 module size of approved make ,with all necessary fixing and electrical connections complete. |
| 115 | S&F modular Socket, 6A - 2/3 pin combined 2 module of approved make ,with all necessary fixing and electrical connections complete. |
| 116 | S&F modular Socket 6A/16A - 2/3 pin combined 2 module of approved make ,with all necessary fixing and electrical connections complete. |
| 117 | S&F modular rotary step type fan regulator, single pole, 120 W, 2 module, complete all as specified and directed. |
| 118 | S&F ceiling rose, three terminals with insulated of approved make with all necessary fixing accessories and electrical connection complete. |
| 119 | S&F in repairs LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable as required. |
| 120 | S&F in renewal LED surface mounted batten 9/10 watt, powder coated die cast/ extruded aluminium body (Thickness ≥ 1.20 mm) or CRCA sheet body (Thickness ≥ 0.50 mm) and construction as per IS:10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, System lumen efficacy 120 lm/Watt output, operating voltage AC 140-270 volt, 50 Hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP 20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED & electrical circuitary) of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate (TC). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. LM79 & LM80 Test report from NABL lab for all tests required for LED fixtures as BIS shall be submitted. |
| 121 | M&L for submain wiring with two run 4 sqmm FRLSH copper conductor alongwith one run of 4 sqmm earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable colour coded drawing into and including concealed 20 mm rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories such as bends,tees,junction boxes,inspection boxes,saddles,clamps etc including cutting chases,making good distrubed surfaces to match existing finisg complete in all respect, complete all as specified and directed (a) 2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit. |
| 122 | All as Item No 120 above but 2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit. |
| 123 | S&F MCB distribution board SPN, 240 volts, 8 ways factroy-assembled type, fabricated from powder coated, CRCA steel sheet, degree of protection IP-43, IK 09 with reversible double door to conforming to IS 61439 (low voltage switchgear and controlgear assemblies),provided with insulated tinned copper busbar of 100 Amp rating , complete with all internal connections , earthing connections,and blanking plates for all unused ways/spaces complete in all respects, complete all as specified and directed . |
| 124 | All as Item No 122 above but SPN, 240 volts, 12 ways.complete all as specified and directed. |
| 125 | S&F of MCB SP 240 volts, C Curve of 06 to 32 Amps, 10 KA Current carraying capacity complete all as specified and directed. |
| 126 | S&F of MCB SPN 240 volts, C Curve of 32 Amps, 10 KA Current carraying capacity complete all as specified and directed. |
| 127 | S&F exhaust fan 300mm sweep in steel body AC single phase, 230 V with blades, frame and louvers of complete all as specified and directed. |
| 128 | S&F exhaust fan 250mm sweep made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 or more copper winding complete all as specified and directed. |
| 129 | Taking down carefully ceiling/Exhaust fan of any size and type and refixing on same or new location after oiling, greasing, Painting all as directed. |
| 130 | S&F LED surface mounted batten light fitting 20/22 W, powder coated die cast/ extruded aluminium or CRCA sheet phosphated and powder coated body construction confirming to IS:10322 (part-I) / IEC 60598-1 with Replaceable high efficiency electronic driver (diver efficiency >85%,) System lumen efficiency >120 lm/Watt suitable for AC 140-270 Volt, 50 Hz, operating temp range -15 deg to 40 deg. The luminarie shall be provided with internal surge protection of 2.5 KV with Short & Open circuit protection, CRI >80, Flicker <5%, the LED shall be have minimum rated life 50000 burning hours with 70% Lumen maintained till life ends, the CCT shall be 5700°K /6000°K/6500°K (ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption shall not exeed rated wattage the luminarie shall confirm to relevant BIS standard and bear a valid BIS trade mark certificate (TC). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing the item inclued internal wiring with suitable size FRLS, PVC insulated copper conductor cable all connection earthing, fixing accessories and is complete in all respect with Minimum 5 year OEM warranty. LM79 & LM80 Test report from NABL lab for all tests required for LED fixtures as BIS shall be submitted. |
| 131 | S&F door bell, AC, 240 volts, single pole of approved make ,with all necessary fixing and electrical connections complete all as specified and directed |
| 132 | S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 25 Amp 'C' curve with all necessary internal wiring connection and fixing arangement complete complete all as specified and directed |
| 133 | M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES SSR Part-I (2009) connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, earth pit cover 40 mm thick reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. |
| 134 | Taking down DBs any type and size including MCBs/MCCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc complete |
| 135 | Supply and fixing LED lamp 9 watt complete all as specified and directed |
| 136 | S&F 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75000 buring Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as per IEC 61000-4-5 complete potted driver and fitting should be same make and LM80, LM79 report require and BIS separate driver and luminaries.complete all as specified and directed |
| 137 | Dismantling carefully electric Chimney with exhaust pipe and refixing Same on new board after rewiring in replacement of unservicable wire complete all as specified and directed. |
| 138 | S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 12 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements and complete all as specified and directed |
| 139 | Taking down carefully geyser of any type and refixing the serviceable geyser in its original or new location all as directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender