Tender For Special Repair To Bldg No P-658 In Klp-Iii At Fazilka Mil Station
Tender Value
47.58 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
95200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-658 In Klp-Iii At Fazilka Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified and directed by Engineer - in-Charge. |
| 2 | Taking down chowkats with shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store all as specified and directed by Engineer - in-Charge. |
| 3 | Dismantling of boarding, any description, fixed in position with nail |
| 4 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 5 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type skelton door shutter of size 30mm thick open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | Ditto as per item No. 6 Above but of frame size 65 x 125 mm |
| 8 | Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer. Including all required fixing material such as SS brackets, screws, adhesive etc., including taking out old any type cabinet complete all as specified and as directed by Engineer-in-charge.Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment.(ii) Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 9 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Note : Glass shall be paid separately). |
| 10 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)(A) Area not exceeding 2.00 sqm each |
| 11 | S&F factory made prefabricated pressed steel door frame made out of mild steel 1.25 mm thick girth of frame 185 mm including necessary MS rawl plug/bolts and fixing 75 mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100 mm (Make Godrej/Harrison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not visible from front) and hammer tone paint on exterior surface (visible from front) complete as per Godrej pattern all as specified and directed by Engr-in-charge drawing complete all as specified and directed by Engineer-in-charge. (Note : Girth of frame will be measured seperately under same item) |
| 12 | S & F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete/ |
| 13 | S&F 125 mm long Aluminium handle cast type anodized all as specified and directed by Engineer-in-Charge. |
| 14 | S&F 150 mm long Aluminium handle cast type anodized all as specified and directed by Engineer-in-Charge. |
| 15 | S&F 150 mm long Aluminium anodized barrel tower bolt of extended section and fixed all as specified and directed by Engineer-in-Charge. |
| 16 | S&F 200 mm long Aluminium anodized barrel tower bolt of extended section and fixed all as specified and directed by Engineer-in-Charge. |
| 17 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed. |
| 18 | S&F Aluminium door stopper of any description all as specified and directed by Engineer-in-Charge. |
| 19 | S & F continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed. |
| 20 | S&F magnet ball catcher for cupboard shutter, complete all as specified and as directed by Engineer-in-Charge |
| 21 | S&F 125 mm size hasp and staple,aluminium anodished,including bolt to hinge plate and fixed with screws,complete all as directed. |
| 22 | S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F 25 mm dia Stainless steel drapery curtain rod, 25mm dia with decoative brackets, knobs,end stops etc and fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 24 | S & F 5.5mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required |
| 25 | S & F 4 mm thick figured glass pin headed and glazing with aluminium glazing beading clips in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge. |
| 26 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed. |
| 27 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge.. |
| 28 | M&L 16mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in 15mm thick cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite. |
| 29 | M&L for 16mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 30 | Providing edge moulding to 16mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete |
| 31 | M&L machine cut kota stone slab flooring 16-18mm thick in single piece over cement screed base laid and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge. |
| 32 | M&L for kota stone slab flooring 16-18mm thick in single piece in riser of steps,skirting,dado and pillar laid and jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge. |
| 33 | Cutting ,grinding ,cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises. |
| 35 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 36 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular ) joint free tiles area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr in Charge. |
| 37 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr in Charge. |
| 38 | M&L cool roof tiles 300x300x10mm white vitrified water absorption < 0.5% SRI>90 (ASTME 1980, EN673 and En 411) BEPL (Building energy performance laboratory) certified laid over screed bed or bedding layer of mortar 15mm thick CM (1:4) complete all as specified and directed by Engineer - in - Charge. |
| 39 | Demolition of cement concrete (un re-inforced) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 40 | M & L 25 mm thick Cement Concrete 1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge . |
| 41 | M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 42 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 43 | M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 44 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 45 | M & L 5mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 46 | M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 47 | M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound 3% by weight of cement finished even & smooth without using extra cement ( WPC shall be measured & paid separately) cement all as specified and directed by Engineer - in - Charge . |
| 48 | Supply only liquid water proofing compound |
| 49 | Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar and removing/disposal off from the site complete all as specified and as directed by Engineer-in-charge. |
| 50 | Demolition/taking out of mud from roofs, any thickness, including removing / cutting uprooting grass,vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 51 | M & L for levelling coarse for roof slab,Pain Cement Concrete 1:2:4 (type B–0 using 12.5mm graded stone aggregates) for maintaining prooper slope and finishing the surface even and smooth complete all as specified and directed by Engineer - in – Charge . |
| 52 | M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed. |
| 53 | M&L for rendering 10mm thick plaster in cement mortar (1:4) shall be provided mixed with water proofing compound, ISI marked as per manufacturer instructions. The plaster shall be steel toweled to get a smooth surface. |
| 54 | M&L for roof treatment as specified below and as directed -(a) Over the plastered surface apply one coat of compactible primer for PU coating as per manufacturer specification. Allow the primer to touch dry condition.(b) Apply first coat of PU coating (Shaliurethane @ LHM @650gm/Sqm (minimum) or equivalent) by brush/roller/spray, spread water proofing reinforced glass fiber Tissue of 150 GSM with overlaps of 75mm in both directions when the surface is still tacky. Alloow 1st coat to dry for 10-12 hr.(c) Apply 2nd and 3rd coat of PU membrane (Shaliurethane @ LHM @650gm/Sqm (minimum) or equivalent) as per as per manufacturer instructions having sun reflective index (SRI) of minimum 106 on top of roof surface after application. Extend water proofing treatment upto 200mm and terminate into groove on the parapet wall.Note :(i) The minimum thickness of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat.(ii) the plan area shall be considered for payment.(iii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicater approved by GE.(iv) trhe manufacturer/authorised applicator shall give a warranty for the performance and durability for 10 years. |
| 55 | M&L 50mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement. |
| 56 | M & L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete |
| 57 | S&F machine pressed precast concrete interlocking paver block with grey cement & no pigment, any shape and size confirming to IS 15658-2006 of 80mm thick M-40 grade including and over 25mm thick sand cushion. |
| 58 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 59 | Supply for Pipe Supporting Clamping for Single pipe of PVC dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe; Wall distance 75 mm (3\\") - 1 Nos. ; 2. U bolt Rubber Sleeve mounted for 4\\" (110 mm) PVC Pipe Dia. - 1 No.; and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 nos. Fixing Details:Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Make: Shaivi or equivalent as approved by GE. |
| 60 | Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3\\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 100 mm (4\\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \\"C\\" Channel with ribs to be used of size 250 mm (10\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material 48mm x 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 100 mm (4\\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\\") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3\\") PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bathinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : DRG NO.- BTD-916. Make: Shaivi or equivalent as approved by GE. |
| 61 | Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed. |
| 62 | Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed. |
| 63 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 64 | S&F 110mm PVC (SWR) pipes single socketed(pressure rating not less than 6kg/sqcm) in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 65 | Supply & fixing 110mm bore PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 66 | Supply & fixing 75mm bore PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 67 | S&F 75mm PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 68 | Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge. |
| 69 | Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge. |
| 70 | Supply & fixing PVC (SWR) floor trap, plain with grating, suitable for 100/75mm bore pipe including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 71 | Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge. |
| 72 | Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge. |
| 73 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 74 | S&F 110mm PVC(SWR) sanitary connection socket to fit out let of WC complete all as specified and directed. |
| 75 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store |
| 76 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store |
| 77 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 78 | S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm (OD) SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 79 | S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes 25mm (OD) SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. |
| 80 | S&Fin repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 81 | S&F 32mm bore for discharge pipe Bottle trap of stainless steel having minimum water seal of 25mm |
| 82 | S&F in repairs wall mounted vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and including Jet spray and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed by Engineer-in-Charge.Make ;- cat part No. ARS-WHT-0110 of Jaquar or equivalent as approved by garrison Engineer. |
| 83 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 84 | S&F EWC Jet spray complete all as specified and directed. |
| 85 | S&F in repair PVC concealed type flushing cistern set of capacity 10 ltr with half frame including all fixing accessories and knob fixed in wall and including flush pipe of PVC 32mm bore and connection to WC pan making good dismantled portion of wall complete all as specifed and directed. Make:Cera cat part No B1110112 or equivalent |
| 86 | S&F in repair vitreous china,white wash hand basin ,pedestal type, flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repairs stainless steel sink overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as directed. |
| 88 | S&F PVC waste pipe 32mm dia & 90 cm long all as specified and directed by Engineer-in-Charge |
| 89 | S&F 600mm dia modular circular type beveled edge mirror of selected quality glass with touch screen pattern type lighting system fixed with brass screw and cup washes fixed in repaire complete all as specified and directed. |
| 90 | S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified . |
| 91 | S & F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . |
| 92 | S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 93 | S & F Brass CP mixer for Wall/ WHB, mixing hot & cold water screwed down for iron pipe and fixed |
| 94 | S & F in repairs for brass chromium plated over head shower rose oval shape single flow 300 x 200 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.Make :Cat part No. OHS-49497 of Jaquar or equivalent. |
| 95 | S & F soap dish holder brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge.Make ;- cat part No. AKP-35731P of Jaquar or equivalent as approved by garrison Engineer. |
| 96 | S & F soap dish dispenser with glass bottle brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge.Make ;- cat part No. ACN-1135N of Jaquar or equivalent as approved by garrison Engineer. |
| 97 | S & F in repairs stainless steel towel rack with hook, mirror finish,polished,rust proof, foldable with multi purpose hooks (min. weight 1.5 Kg) complete all as specified and directed.Make ;- cat part No. AHS-1581H of Jaquar or equivalent as approved by garrison Engineer. |
| 98 | S&F CP stainless steel toilet paper holder complete all as specified and directed.Make ;- cat part No. AHS-1553 of Jaquar or equivalent as approved by garrison Engineer. |
| 99 | S & F in repairs glass corner shelf assembly fancy type made 8 mm thick sheet glass of size 300x300mm fixed with 'F' or 'D' type brass CP brackets complete all as specified.Make ;- cat part No. ACN-1173 of Jaquar or equivalent as approved by garrison Engineer. |
| 100 | S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement. |
| 101 | Supply & fixing PVC (SWR) floor trap, plain with grating, suitable for 100/75mm bore pipe including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 102 | S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge. |
| 103 | Dismantling water tanks and removing to store of 500 ltr capacity |
| 104 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I. |
| 105 | S&F in repair 20 mm float ball valve high pressire of PTMT with epoxy coated aluminium rod & high density platic ball screwed for iron pipe and fixed. ( Min weight 15 mm - 142 gms/20 mm 210 gms/25 mm 455gms/40mm 690 gms) |
| 106 | M & L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying a coat of cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed. |
| 107 | M & L for preparation of old surfaces by complete removal of existing treatment of painted ceiling incl beams etc. by mechanical equipments like electric wall sander/water jet machine and applying a coat of cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed. |
| 108 | M & L for preparation of old surfaces by complete removal of existing treatment of painted wall/ceiling incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete, by mechanical means as per manufacturer's specification complete all as specified and directed. |
| 109 | M & L for preparation of new surfaces of walls incl pillar etc. and applying a coat of cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed. |
| 110 | M & L for preparation of new surfaces of wall/ceiling incl pillars etc. and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by mechanical means as per manufacturer's specification complete all as specified and directed. |
| 111 | M & L for preparation of new surfaces of ceiling incl beams etc. and applying a coat of cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer's specification complete all as specified and directed. |
| 112 | Material and labour for preparation of wall/ceiling surfaces and applying 1 mm thick cement based external wall care putty on old or new plaster surface complete all as specified and directed. |
| 113 | M & L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration. |
| 114 | Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate. |
| 115 | Taking down unserviceable main switches and MCB distribution boards single phase complete all as specified. |
| 116 | Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers for paino type fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ). |
| 117 | All as per Item No.116 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ). |
| 118 | All as per Item No.116 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ). |
| 119 | All as per Item No.116 above here in before but for One light point controlled by two 2-way switches of 5 amps (switch shall be measured and paid separately under appropriate item of BOQ). |
| 120 | Description all as per item No.116 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.(switch, socket shall be measured and paid separately under appropriate item of BOQ). |
| 121 | Supply and fixing modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 122 | Supply and fixing modular switch 5/6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 123 | Supply and fixing modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 124 | Supply and fixing modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 125 | Supply and fixing modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 126 | Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, . |
| 127 | M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed. |
| 128 | Supply and fixing modular Fan regulator, single pole, one way complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 129 | S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed. |
| 130 | S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed. |
| 131 | S& F plug and socket type DB (Functional unit)20 Amps capacity with provision of single pole 20 amps MCB,plug top and earth plug,grouted flush to walls complete all as specified. |
| 132 | S&F Electric bell ding dong complete all as specified. |
| 133 | Supply and fixing modular Bell Push switch, 5Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 134 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.. |
| 135 | S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin. |
| 136 | S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge |
| 137 | S&F for WEE Plus LED Bldg security light luminaire of capacity 35 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge |
| 138 | Supply and fixing bracket made out of GI tubing light grade 25mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron of size 25x4 mm with suitable nuts and bolts for holding/fixing of bracket on steel pole including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 139 | M&L for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete, including provision of 1 x 10 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified.( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 140 | Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to 280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of 'B' class insulation, single phase, maximum 26W (± 10%), Temperature rise 40 degree maximum with remote, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable size from ceiling rose to fan, taking out old /existing fan any type/size and deposited to BSO yard E/M store complete all as specified.Note :- (i) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account |
| 141 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc all as specified |
| 142 | M&L for making holes for Exhaust fans/Air freshener for size of 250/230mm dia and filling the old holes with suitable material and making good surface and finishing, painting with existing colour and cleaning the stie complete all as specified and directed |
| 143 | Supply and fixing Exhaust fan metal body body, AC single Phase 230V, size 300mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.5 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 144 | Supply and fixing Air freshener fan PVC body, AC single Phase 230V, 50 Cycle per second, size 250mm sweep, copper winding motor with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 145 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core complete all as specified and as directed by Engineer-in-charge. |
| 146 | Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site. |
| 147 | Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 148 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
| 149 | Supply and laying double wall corrugated pipe (DWCP), Non-metallic, resistance to compression : type 450, resistance to impact; normal, resistance to bending: pliable, resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation: non flame propagating, nominal outside diameter 77 mm minimum inside dia 63 mm conforming to IS-16205 (part-24) 2017 including necessary jointing material i.e snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as directed. |
| 150 | Supply and fix light grade 50mm GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable complete all as directed |
| 151 | S&F 25 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete all as specified and as directed by Engineer-in-Charge.. |
| 152 | S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 153 | S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 125 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including MCCB 4 pole 63 Amp, making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed. |
| 154 | Supply only MCCB 4 pole 100A , 415 V, 50Hz having breaking capacity 16 KA with adjustable thermal & magnetic setting complete all as spd and directed by Engg.in.Charge. |
| 155 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, HT/LT equipments, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender