Tender For special Repair To Bldg No P-03 Nalwa Road (Offr Md Accn) And Special Repair Of Chain Link Fencing Of Offrs Md Accn From P-11,P-12,P-13,P-14,P-15, P-16 And P-24 Nalwa Road Under Age B/R-I Under Ge(East) Jalandhar Cantt. (Tender Id No 2026_M
Tender Value
48.77 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
9 days left
EMD
97546
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-03 Nalwa Road (Offr Md Accn) And Special Repair Of Chain Link Fencing Of Offrs Md Accn From P-11,P-12,P-13,P-14,P-15, P-16 And P-24 Nalwa Road Under Age B/R-I Under Ge(East) Jalandhar Cantt. (Tender Id No 2026_Mes_789188_1)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2026 | Corrigendum No 01 dated 26 Sep 2026 | Date | 10-Oct-2026 |
| 2 | 03-Oct-2026 | Corrigendum No 02 dated 03 Oct 2026 | Date | 13-Oct-2026 |
| 3 | 26-Sep-2026 | Corrigendum No 01 dated 26 Sep 2026 | Date | 10-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition Cement Concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 2 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 3 | M&l Brick Work with fly ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 4 | Ditto all as per item no. 3 above, but except bricks, complete all as specified and as directed. |
| 5 | Taking down Chowkat or Frame (without taking off shutter from the frame) not exc. 1.50 Sqm Each, complete all as specified and as directed. |
| 6 | Taking down Chowkat or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but not exc 4.00 Sqm Each, complete all as specified and as directed. |
| 7 | S&F factory made flush shutters, 35mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 30X 6mm thick 2nd class HW lipping on edge, complete all as specified and as directed. |
| 8 | S&F factory made IInd Class softwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and as directed. |
| 9 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 10 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 11 | Providing and fixing factory made uPVC white colour casement (Openable) window( having guard bars) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area Not Exceeding 1.00 Sqm each.Note:Guard bars will paid in seperate item. |
| 12 | Providing and fixing factory made UPVC white colour casement (Openable) window ( having guard bars) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners, complete all as specified and as directed.Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area Exceeding 1.00 Sqm but not exceeding 2.00 sqm each.Note:Guard bars will paid in seperate item. |
| 13 | Providing and fixing factory made UPVC white colour casement (Openable) window ( having guard bars) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners, complete all as specified and as directed.Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area exceeding 2.00 sqm each.Note:Guard bars will paid in seperate item. |
| 14 | S&F mild steel framed work for such as guard bars/grills,grating atc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door ,railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer , complete all as specified and as directed. |
| 15 | S&F 5 mm thick Toughned glass as in windows, hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and including fixed black film on glass surface, complete all as specified and as directed. |
| 16 | S&F of SS curtain rail of 25mm dia, complete all as specified and as directed. |
| 17 | S&F in repair, End Stopper, Decorative type and Fixing Brackets for the Drapery Rod 25 mm dia. (One Set comprises of 2 No. of Decorative type End Stopper 2 No. of Fixing Brackets), complete all as specified and as directed |
| 18 | S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 19 | S&F in repair of 150mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 20 | S&F 150mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 21 | S&F 100mm aluminium handles, cast type, anodised, complete all as specified and as directed. |
| 22 | S&F for 100mm size mild steel butt hinge medium weight all as specified. |
| 23 | S&F for 75mm size aluminium alloy anodised butt hinges all as specified and directed. |
| 24 | S&F for 300mm brass ordinary rat tail pattern springs incl roller plate, complete all as specified and as directed. |
| 25 | S&F Mild steel sliding door bolts 300mm,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed. |
| 26 | S&F in repair floor door stopper of aluminium alloy body & tongue of size75 mm, anodised with hard drawn spring,fixed in door, complete all as specified and as directed. |
| 27 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 28 | M&L prepration of new wooden surfaces and applying two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth, complete all as specified and as directed. |
| 29 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed. |
| 30 | S&F in repair factory made built-in steel cup board with pressed steel frame of size 75 mm x 50 mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ / TD / 20 / 11 sheet 1/5 to 5/5 dt 01.08.11, complete all as specified and as directed.Make : Godrej, Durian or equivalent as approved by GE. |
| 31 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed. |
| 32 | M&L for non-skid ceramic colour tiles 400x400, 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 33 | M&L for cloured glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over and incld.10mm thick screed plaster in CM 1:4, complete all as specified and as directed. |
| 34 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 35 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surface/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4), complete all as specified and as directed. |
| 36 | M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture match with shade of granite and including screed bed/plaster layer 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 37 | Taking down Cement Plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc., complete all as directed by Engr-in-charge. |
| 38 | M&L for Rendering 12mm thick in cement mortar 1:6 on INTERNAL fair faces of Brick walls or on concrete surfaces, finished smooth and even, complete all as specified and as directed. |
| 39 | M&L for 15mm thick rendering in Cement Mortar 1:4 on External Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even, complete all as specified and as directed |
| 40 | M&L for Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc., plastered surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed. |
| 41 | M&L for prepartion of new plastered surface of wall and applying two Exterior Acrylic Emulsion paint over a coat of alkali resistant primer, complete all as specified and as directed. |
| 42 | M&L for complete removal of existing treatment of old plastered surface of wall and applying two Exterior Acrylic Emulsion paint, complete all as specified and as directed. |
| 43 | M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed. |
| 44 | M&L for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper over a coat of 1mm putty , complete all as specified and as directed. |
| 45 | M&L for two coat of white wash old plastered surfaces of ceiling including preparation of surface, complete all as specified and as directed. |
| 46 | M&L preparing newly Plastered Surfaces of Ceiling and applying three coats of White Wash, complete all as specified and as directed. |
| 47 | M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash, complete all as specified and as directed. |
| 48 | M&L for preparation of old decorated plastered or unplastered surfaces and apply two coat of white wash on walls including cornices etc, complete all as specified and as directed. |
| 49 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified of size 125x60mm, complete all as directed by the Engr-in-Charge. |
| 50 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified of size 105x60mm, complete all as specified and as directed. |
| 51 | M&L for cement concrete 1:3:6, Type-C-1 (unsing 20mm graded crushed stone aggrgate) as in filling in steel frame/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed. |
| 52 | Dismantling of brick tiles single layer as in roof covering, complete all as directed by the Engr-in-Charge. |
| 53 | Demolition of mud in roofs any thickness, complete all as directed by the Engr-in-Charge. |
| 54 | Wire brushing and cleaning top sureace of cement concrete , including flashing and juction of parapets etc, complete all as specified and as directed. |
| 55 | Brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and as directed. |
| 56 | M&L for cement concrete in foundations, filling and mass concrete 1:2:4 type C-0 using 12.5 mm graded crushed stone aggrgate as in roof padding 50mm thick in average . |
| 57 | M&L 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc, complete all as specified and as directed. |
| 58 | Supply and applying high built elastomeric wterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrance with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm , no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base prepration, epoxy primer 1: (resin; harder) application with 100% water dilution and pure polyurethane appliction in 2 coats with a tortal min consumption of 1.25 kg per Sqm. Appliction should be done with Graco sprauer by a company autorised applicator, complete all as specified and as directed. |
| 59 | Supply only integral water proofing compound, complete all as sprcified and directed. |
| 60 | M&L PCC 25mm thick 1:2:4 type B-0, (12.5mm graded aggregate) and finishing the surface rough and even to receive top layer as under tiles ,stnoe etc, complete all as specified and as directed. |
| 61 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as directed by the Engr-in-Charge. |
| 62 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as directed by the Engr-in-Charge. |
| 63 | M&L 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed |
| 64 | M&L 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed. |
| 65 | Cutting chases, pinning in making good to facing where required for concealed water tubing or concealed conduit wiring and making good in CM 1:3, cutting not exc 10cm girth etc on brick walls, complete all as specified and as directed. |
| 66 | S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs, complete all as specified and as directed. |
| 67 | S&F in repair Centre Hole Basin Mixer with popup waste with 450mm long of approved make suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 68 | S&F in repair Concealed Stop Cock with Adjustable Wall Flange of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 69 | S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated fancy type screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore, complete all as specified and as directed. |
| 70 | S&F in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 71 | S&F in repair Single lever Sink mixer swinging spout (Wall mounted) with connecting legs & wall flanges of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 72 | S&F in repair Over Head Shower 140mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 73 | S&F in repair Hand Shower 105mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system as approved suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. |
| 74 | S&F in repair Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union, complete all as specified and as directed. |
| 75 | S&F in repair, Towel Rack with Lower Hanger as approved fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. |
| 76 | S&F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed. |
| 77 | S&F in repair (health faucet) with 8mm dia, 1.2 mtr long flexible tube & wall hook of approved MAKE, suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed. |
| 78 | S&F in repair CP jet spray with holder for EWC,1.5m long, complete all as specified and as directed. |
| 79 | S&F in repair PVC connection, heavy duty15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality, complete all as specified and as directed. |
| 80 | S&F in repair new flxible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm , complete all as specified and as directed. |
| 81 | S&F in repair, Coloured PVC Toilet Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. |
| 82 | S&F in repair Mirror 600x450mm, Beveled Edge, Selected quality Glass, mounted on 6mm thick AC Building Board or Commercial Plywood and fixed to Wooden Plugs with Chromium plated Brass Screws and Cup Washers and fixed-in-repairs, complete all as specified and as directed. |
| 83 | S&F in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed. |
| 84 | S&F in repair Corner glass shelf (with bracket) of approved MAKE, complete all as specified and as directed. |
| 85 | S&F in repair Soap Dish holder of approved MAKE, complete all as specified and as directed. |
| 86 | S&F in repair Toilet roll holder with flap of approved MAKE, complete all as specified and as directed. |
| 87 | S&F Vitreous China White Wash Down Water Closet Pan with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces including dismantling the existing unserviceable Water Closet, complete all as specified and as directed. |
| 88 | S&F in repair, White Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed. |
| 89 | S&F Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. |
| 90 | S&F PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Cistern, complete all as specified and as directed. |
| 91 | S&F Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with full pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Wash Basin, complete all as specified and as directed. |
| 92 | S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Overall size 915x460mm and double Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 93 | S&F rotational moulded synthetic (HDPE), water storage tank 1000 litre capacity (cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as spfd & directed. |
| 94 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 95 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) , complete all as specified and as directed. |
| 96 | S&F chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap, complete all as specified and as directed. |
| 97 | Dismantling of cast iron drain pipe jointed with cement mortar/lead joint and taking out from wall/floor if reqd 75/100mm |
| 98 | S&F 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and as directed. |
| 99 | S&F 75 mm bore PVC pipes single socketed in any length with rubber ring joints ixed to walls or laid in floor, complete all as specified and as directed. |
| 100 | S&F 110 mm dia PVC (SWR ) bends any radius, complete all as specified and as directed. |
| 101 | S&F 75 mm dia PVC (SWR ) bends any radius, complete all as specified and as directed. |
| 102 | S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 103 | S&F 75 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 104 | S&F 110 mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 105 | S&F 75mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings ljoits fixed to walls, complete all as specified and as directed. |
| 106 | S&F 75mm dia PVC (SWR ) vent cowl, complete all as specified and as directed. |
| 107 | M&L 75mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs, complete all as specified and as directed. |
| 108 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets. |
| 109 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets. |
| 110 | Supply, Fixing and installation of wall mounted Electric Kitchen Chimney of size 75 cm, compact design suction 1400m3/hr Auto clean type touch control with wave sensor duct dia 150mm including free Kit for installation with duct cover of adequate size ,kutchina and equivalent make as approved by GE. |
| 111 | S&F auto hinges for cabinet case (Make ; KARF/HETICH) |
| 112 | S&F stainless steel plain basket of size 15”x18”x4” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed. |
| 113 | S&F stainless steel plain basket of size 15”x18”x6” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed. |
| 114 | S&F stainless steel plain basket of size 15”x18”x8” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed. |
| 115 | S&F stainless steel partition of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine complete) all as specified & directed. |
| 116 | S&F stainless steel cutlery of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine), complete all as specified and as directed. |
| 117 | S&F stainless steel grain trolly with stand of size 21”x17”x10” (Make: Everlite/ Slimline Peacock/Fabshine), complete all as specified and as directed. |
| 118 | S&F stainless steel cup & soucer, trolly of size 15”x18”x4” (Make: Everlite/ Slim line Peacock/Fabshine), complete all as specified and as directed. |
| 119 | S&F stainless steel Plate basket of size 24\\"x30\\" (Make: Everlite/ Slim line Peacock/Fabshine), complete all as specified and as directed. |
| 120 | S&F 20” long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws , complete all as specified and as directed. (Make: Nixon/Radol/Ozone Ultima or Equivalent), complete all as specified and as directed. |
| 121 | S&F 150 mm size stainless steel bright finish handle for cabinet shutter. |
| 122 | M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate as in sub base finishing the surface even and rough to receive floor finishes, complete all as specified and as directed. |
| 123 | M&L for durastone vitrified tile 400x400x10 to 12mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 124 | Dismantling RCC jalli etc, any thickness jointed in any mortar, complete all as directed by engr-in-charge. |
| 125 | M&L for Providing precast cement concrete (1:2:4) type- B-0 (using 12.5mm graded crushed stone aggrgates) louvres and jallies, 35mm thick (measured solid), including all mouldings necessary formwork and reinforcement set in CM 1:4, complete all as specified and as directed. |
| 126 | Demolition of re-inforcment cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level), complete all as directed by engr-in-charge. |
| 127 | M&L for nominal mix RCC slab, shelves chajja and facia etc in 1:1.5:3 type B-1 using 20mm graded crushed stone aggregate and similar articles, complete all as specefied and directed. |
| 128 | M&L for pre-cast RCC slab in 1:1.5:3 type B-0 using 12.5mm graded crushed stone aggrgate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specefied and directed. |
| 129 | M&L for mild steel bars 6 to 8 mm dia deformed bars cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.9mm dia confirming to Fe-410-0, complete all as specified and as directed. |
| 130 | M&L form work to chajjas and similar items including edges, complete all as specified and as directed. |
| 131 | M&L for Providing PCC in roof kerbs/coping rounded type B-0, (1:2:4) using 12.5mm graded stone aggrrgate, complete all as specified and as directed. |
| 132 | M&L 75mm thick PCC 1:3:6 Type C-1 using 40mm graded crushed aggregate as in plinth protection/path, complete all as specified and as directed. |
| 133 | M&L for laying 60 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and no pigment including dismantling of old paver block, complete all as specified and as directed. NOTE: The sample shall be got approved from the GE before buld procurement and lots shall be got tested independtly by the GE. |
| 134 | M&L 25mm sand cushion, filling under floors or in foundations including watering and consolidation , complete all as specified and as directed. |
| 135 | M&L for chequered Cement concrete tiles with grey cement and pigment of size 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and incl. screed bed 15mm thick in cm 1:6, complete all as specified and as directed. |
| 136 | M&L PCC (1;2:4) type B-1 using 20mm graded crushed stone agregete as in sides of rounded or chamfered on edges of interlocking/ chequered tiles, bed block concrete. |
| 137 | Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning,filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil out of defence land and making good surface all as specified & directed. |
| 138 | Dismantling posts or struts (Steel or RCC, ) any section embedded in concrete, including taking out embeded portion and making good disturbed ground and preparing post holes for providing new posts in any type of soil, complete all as directed by engr-in-charge. |
| 139 | Taking down carefully old galvanised stranded steel barbed wire from old steel posts and removing from site, complete all as directed by engr-in-charge. |
| 140 | Dismantling fancing wire mesh, any type, complete all as directed by engr-in-charge. |
| 141 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as directed by engr-in-charge. |
| 142 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level), complete all as directed by engr-in-charge. |
| 143 | PCC(1:3:6) type C2 (40mm graded crushed stone aggrgate) filling in post holes, foundation, surface channels and drains and other similar work, complete all as specified and as directed. |
| 144 | M&L for Mild steel angle iron fencing posts and struts in fencing including necessary cutting , drilling , welding etc and bending to swan neck shape as required and drilling hkoles notching for wire etc conforming to Fe-410-0 or 310-0, complete all as specified and as directed. |
| 145 | S&F Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm barbs at 75 mm spacing and straining and fixing to posts of any type including securing or tying at crossing with and provision of GI wire staples or steel pins etc, complete all as specified and as directed. |
| 146 | M&L for concertina coil of 600mm dia on vertical double horn fencing , complete all as specified and as directed. |
| 147 | Supply only chain link fencing any mesh and size, complete all as specified and as directed. |
| 148 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed. |
| 149 | S&F MS bars 10 mm dia and over cut ot length bent to shapt including cranking bending etc, complete all as specified and as directed. |
| 150 | S&F Mild steel screw bolts (machine made) 5 to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and as directed. |
| 151 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggrgate as in covered to bottom of fencing icluding necessary formwork, complete all as specified and as directed. |
| 152 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/Loose soil, complete all as directed by engr-in-charge. |
| 153 | M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring/hard standing. |
| 154 | Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc, complete all as directed by engr-in-charge. |
| 155 | M&L for point wiring with modular accessories for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble, complete all as specified and as directed. |
| 156 | Ditto all as per srl item No. 155.00 here-in-before but for one fan point controlled by one switch, complete all as specified and as directed. |
| 157 | Ditto all as per srl item No.155.00 here-in-before but for one bell point controlled by one bell push, complete all as specified and as directed. |
| 158 | Ditto all as per srl item No. 155.00 here-in-before but for one socket outlet 5 Amps on independent board, complete all as specified and as directed. |
| 159 | Ditto all as per srl item No. 155.00 here-in-before but for one socket outlet 5 Amps on the same board controlled by one switch, complete all as specified and as directed. |
| 160 | Ditto all as per srl item No. 155.00 here-in-before but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories , complete all as specified and as directed. by Engineer-in-Charge |
| 161 | S&F switch modular type single pole one way 6 Amps including suitable size of module cover with frame etc, complete all as specified and as directed. |
| 162 | S&F in replacment of module switch 1 way 16 A, 1 module, complete all as specified and as directed. |
| 163 | M&L for modular socket, 6 Amps, 2/3 pin combined 2 module complete all as specified |
| 164 | S&F in replacment of modular socket, 6/16 Amps, 2/3 pin combined 2 module complete all as specified |
| 165 | S&F in replacement bell push switch flush type 5 Amps, SP, 240 volts, complete all as specified and as directed. |
| 166 | S&F Fan step regulator 120 W , four stepped ,2 module all as specified and directed. |
| 167 | S&Fing ceiling rose, surface bakelite, 65 x 17 mm three terminals (ISI Marked) complete all as specified and as directed |
| 168 | S&Fing in replacement bell, Ding Dong AC. 230 volts,single pole |
| 169 | S&Fing LED lights fitting 1x 20 Watt, 220V AC decorative box type frame with holder including LED tube rod 20 watt connecting up single/ double connections with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 170 | S&Fing LED light fitting mirror type with high out put diffuser 9/10 watt 220 V AC decorative type including connecting up with three core flexible copper conductor cable of suitable size complete |
| 171 | S&F in repair Decorative wall mounting light fitting suitable for 09 watt LED lamp complete with glass shade/ polycarbonate cover including 1 x 09 watt LED lamp , complete all as specified and as directed. Note : Sample approval of decorative light will be approved before excution of site. |
| 172 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amp 240 V 10 KA, complete all as specified and as directed. |
| 173 | S&F in replacement of building security light fitting with LED TYPE 35 watt optic lenses with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & S&Fing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32 mm bore “light grade” brackets 1.5 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 , complete all as specified and as directed. by Engineer - in - Charge |
| 174 | S&F LED in replacement post top made 25 W warm white in die cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP65 protection opal diffuser available, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 175 | S&F LED in replacement post top made 25 W warm white in die cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP65 protection opal diffuser available, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Oct 13, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 days
Oct 10, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender