Tender For Repair/Maint & Periodical Services To Building Structure Of E/S Installation Under Age B/R-I Of Ge Brichgunj, Sri Vijaya Puram
Tender Value
25 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
14 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint & Periodical Services To Building Structure Of E/S Installation Under Age B/R-I Of Ge Brichgunj, Sri Vijaya Puram
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Sep-2026 | Tender Documents | Other | 30-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick / concrete surfaces incl raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 2 | Demolition of precast concrete block work built in cement mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 3 | M&L for Precast cement concrete block masonry with PCC solid blocks in 1:3:6, type C1 using 20mm graded stone aggregates exc. 10cm in width and set in cement mortar 1:4 complete all as specified and as directed. |
| 4 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work/block masonry or concrete surfaces finished fair and even complete all as specified and as directed. |
| 5 | M&L for Rendering 15mm thick in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately) |
| 6 | Supply only liquid integral water proofing chemicals complete all as specified and as directed. [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] (3% by wt of cement). |
| 7 | M&L for Removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 30 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specificed and as directed. |
| 8 | M&L for Application of high build polymer cement sand mortar 1:3 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 30mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing over a coat of interior/exterior grade wall care putty to match with the existing complete all as specified and as directed. [Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck] |
| 9 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer etc complete all as specified and as directed. |
| 10 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer etc complete all as specified and as directed. |
| 11 | M&L for Applying 1mm thick on wall care putty on walls etc complete all as specified and as directed. |
| 12 | M&L for Preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper etc complete all as specified and as directed. |
| 13 | M&L for Complete removal of existing treatment on surfaces of ceiling/slab and applying two coats of oil bound distemper over a coat of primer etc complete all as specified and as directed. |
| 14 | M&L for Complete removal of old external surfaces of walls, Facias, cornices etc and applying two coat of weather proof anti fungal paint (Apex - ultima) on walls over a coat of primer all as per manufacturer instruction including necessary scaffolding complete all as specified and as directed. |
| 15 | M&L for Preperation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint (anti-corrosive) etc complete all as specified and as directed. |
| 16 | M&L for Preperation of old painted wood and wood based suraces over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 17 | Taking down chowkhats or frames n.exc 1.5 sqm each (without taking off shutters from the frames) including cutting holes to facilitate the taking down and making good the surfaces etc complete all as specified and as directed. |
| 18 | All as per Item Ser No.17.00 above but exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and as directed. |
| 19 | Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each etc complete all as specified and as directed. |
| 20 | Taking down and refixing in the same opening of shutter of any description exc 1 Sqm but n.exc 2 sqm each including easing and adjusting as required complete all as specified and as directed. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), min compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. |
| 23 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 24 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, ruber neoprene packing, handles & tower bolt 2 Nos both in each door, hinges (03Nos), anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 25 | S&F Anodised aluminium window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (2 no.), tower bolt (2 no.) etc complete all as specified and as directed. |
| 26 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed. |
| 27 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 28 | S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed. |
| 29 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed. |
| 30 | S&F 150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed. |
| 31 | S&F Cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and as directed. |
| 32 | S&F in Repair mortice lock brass 4 levers, vertical type of size 100 mm complete all as specified and as directed. |
| 33 | S&F in Repair Aluminium (extruded section ) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 34 | S&F in Repair 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 35 | S&F in Repair aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 36 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 37 | S&F Sheet glass 4.0mm thick ordinary quality and glazing with oil putty in Square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 38 | S&F Sheet glass 4.0mm thick ordinary quality and glazing with oil putty in Square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 39 | Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside MoD land etc complete all as specified and as directed. |
| 40 | M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) light shade polished, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 41 | All as per Item Ser No.40.00 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar 1:4, etc complete all as specified and as directed. |
| 42 | M&L for Coloured Non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 43 | M&L for Glazed ceramic coloured / printed tiles 450X300mm x 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:3, complete all as specified and as directed. |
| 44 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed with neat cement slurry including screed bed of 15mm thick in cement mortar 1:4 etc complete all as specified and as directed. |
| 45 | M&L for Endura Heavy duty Vitrified tiles of size 300mmx300mmx10 to 12mm thick or high dimension (except thickness) of any colour any design durastone weather proof impact resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 etc complete all as specified and as directed. Make : Johnson/Somany/Orient Bell |
| 46 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 47 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed. |
| 48 | M&L for Prepration of newly brick, stone, kerb stones or concrete surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint etc complete all as specified and as directed. |
| 49 | M&L for Prepration of old brick, stone, kerb stones or concrete surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed. |
| 50 | S&F in Repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 51 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 52 | M&L for Plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 53 | M&L for Plain cement concrete 1:2:4, 25 mm thick, type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. |
| 54 | M&L for Plain cement concrete 1:4:8, 75mm thick, type D2 (using 40mm graded stone aggregate) as in sub base of flooring/hard standing,Path way etc complete all as specified and as directed. |
| 55 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed. |
| 56 | S&F Aluminium composite panel 4mm thick sheet (interior grade) as in wall cladding, false ceiling and cup board with and including necessary items like strips/ sealant/adhesive etc complete all as specified and as directed. |
| 57 | M&L for False ceiling with aluminum grid work (Size of grid 605x605mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick etc complete all as specified and as directed. |
| 58 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed. |
| 59 | S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 60 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 61 | S&F Aluminium sheeting, 0.56mm Plain, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) etc complete all as specified and as directed. |
| 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 63 | S&F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed. |
| 64 | S & F Plates (Plain or Chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed. |
| 65 | S&F MS work in wind ties for roof/ valley gutter frame including securing bolts etc complete all as specified and as directed. |
| 66 | M&L for Preperation of new steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint (anti-corrosive) over a coat of primer etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender