Tender For Provn Of 01X Gents Toilet Near Bldg No T-10 (Pc) At Protharapur And Certain Minor Works At Af Station Under Ge Brichgunj Sri Vijaya Puram
Tender Value
24.21 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
15 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 01X Gents Toilet Near Bldg No T-10 (Pc) At Protharapur And Certain Minor Works At Af Station Under Ge Brichgunj Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in any type soil, complete all as specified and as directed. |
| 2 | M&L for Plain Cement concrete 1:4:8, type D2, (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed. |
| 3 | M&L for Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in cement mortar 1:6 complete all as specified and as directed. |
| 4 | M&L for Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in foundations, footings, plinth beams, bases for columns, etc and mass concrete complete all as specified and as directed. |
| 5 | M&L for Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 6 | M&L Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 7 | M&L Reinforced cement concrete (Design mix M-30 grade) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 8 | M & L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or tobatterfor Fair finished surfaces complete all as specified and as directed. |
| 9 | M&L for use and waste of Formwork flat or curved to to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 10 | M&L for use and waste of Formwork flat or curved to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc.incl fair finished surfaces complete all as specified and as directed. |
| 11 | M&L for use and waste of Formwork flat or curved to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surfaces complete all as specified and as directed. |
| 12 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 13 | M&L for TMT bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 14 | All as per Item Ser No.13.00 above but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like complete all as specified and as directed. |
| 15 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M & L for Rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 17 | M&L for Rendering 15mm thick in two layers of 10mm thick backing coat in cement moratr 1:6 and 5mm thick floating coat in cement mortar 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement, complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid seperately) |
| 18 | Supply only Integral water proofing compound conforming to IS-2645 1975 complete all as specified and as directed. |
| 19 | M&L for Preparation of newly plastered wall surfaces and applying two coats of Oil Bound distemper over a coat of primer over a coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 20 | M&L for Preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound distemper over a coat of primer over a coat of 1mm thick wall care putty etc complete all as specified and as directed. |
| 21 | M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two ormore coat applied @ 1.67 ltr/10 sqm over and priming coat of exterior primerapplied @ 2.20 kg/10 sqm) incl preparation of wall surfaces etc complete all as specified and as directed.(Make Apex Ultima) |
| 22 | M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.Note :- Water proofing compound shall be measured and paid separately. |
| 23 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and as directed. |
| 24 | Removal excavated material to a distance not exceeding 50 M and depositing where directed at a level n. exc. 1.5 m above starting point as in any type of soils complete all as specified and as directed. |
| 25 | M&L for Plain cement concrete,100mm thick, 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 26 | M&L for Plain cement concrete 1:3:6, 75mm thick, type C1 (using 20mm graded aggregate) as in Plinth Protection etc complete all as specified and as directed. |
| 27 | M&L for Coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 28 | M&L for Glazed ceramic coloured / printed tiles (450X300mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:3. complete all as specified and as directed. |
| 29 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 30 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 31 | S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed. |
| 32 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specificed and as directed |
| 33 | S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed. |
| 34 | S & F Aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 250mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed. |
| 35 | Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 36 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire cloth and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 37 | S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 38 | Supplying and laying of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 39 | Supplying and laying of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed |
| 40 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 41 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor complete all as specified and as directed. |
| 42 | S&F PVC (SWR) Gully trap 125/110 mm setting and incl joining with solvent cement complete all as specified and as directed. |
| 43 | S&F 110mm PVC (SWR) WC connector bent type setting including Joining with solvent cement complete all as specified and as directed. |
| 44 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 45 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floors complete all as specified and as directed. |
| 46 | S&F 75mm dia PVC (SWR) bend complete all as specified and as directed. |
| 47 | S&F 110mm dia PVC (SWR) bend complete all as specified and as directed. |
| 48 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 49 | S&F PVC (SWR) vent cowls 100 mm dia complete all as specified and as directed. |
| 50 | S&F Stop Valves / Angle Cock fancy type chromium plated 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 51 | S&F Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipewith connecting Assoceries complete all as specified & directed by Engineer-in-charge. |
| 52 | S&F PVC flushing cistern,10 ltr capacity, , white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed. |
| 53 | S&F Two Way Bib Cock Double handle with flange 15 mm bore cast copper alloy Chromium plated with wall flang, screwed down, screwed for pipes complete all as specified and as directed. |
| 54 | S&F in Chromium plated hand shower (health faucet) 15mm dia pipe with 1.0 m long flexible tube and ABS body, wall hook incl making connections and fixed in position complete all as specified and as directed. |
| 55 | S&F Looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 56 | S&F Chromium plated stainless steel gratings 100mm dia, complete all as specified and as directed. |
| 57 | S&F Vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed complete all as specified and as directed. |
| 58 | S & F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 59 | S&F Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed. |
| 60 | S&F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe complete all as specified and as directed |
| 61 | S&F PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified and as directed . |
| 62 | Demolition of stone slab any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specifed and as directed. |
| 63 | Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and removing rubbish out side of the MD Land complete all as specified and as directed. |
| 64 | M&L for Plain cement concrete, 25mm thick, type B-0 (12.5mm graded stone aggregate) as in RCC roof / Floor surface for levelling coarse complete all as specified and as directed. |
| 65 | M&L Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 66 | Demolition of PCC Block walling built in cement mortar complete all as specified and as directed |
| 67 | Taking down chowkats or frames n. exc. 1.5 Square metre each with shutters (without taking off shutter from the frame) complete all as specified and as directed. |
| 68 | All as per Item Ser No.67.00 above but exc 1.5 sqm but n exc 4 sqm each complete all as specified and as directed. |
| 69 | Providing and fixing factory made uPVC Frames (60mm x 58mm) white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasketetc. to be paid separately.) |
| 70 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(a) Area Not exceeding 1.00 Sqm |
| 71 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 72 | S&F in Repair Oval shape vitreous china white thin Rim table top basin of size 500x380x120mm with 32mm waste coupling brass chromium plated suitable for wash hand basins complete all as specified and as directed. |
| 73 | S&F in Repair brass CP 15mm dia bore Central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size also available complete all as specified and as directed. |
| 74 | S&F in Repair vitreous china CASCADE type water closet single piece-WC with UF Soft close slim seat Cover, hinges, fixing accessories set, dual flush cistern fittings complete of size 655 x 360 x 765 mm , P trap-180mm in approved colour complete all as specified and as directed as per ISI mark. |
| 75 | S&F in Repair chromium plated hand shower (health faucet) 1.0 meter, with PVC tube with wall hook , complete all as specified and as directed. |
| 76 | S&F in Repair Toilet paper holder,with flap type fixed to wall with chromium plated brass screws complete all as specified and as directed. |
| 77 | S&F in Repair two way bib tap with wall Flange screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed . |
| 78 | S&F in Repair 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 79 | Supply only looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 80 | S&F in Repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 81 | S&F in Repair glass corner shelf with brackets complete all as specified and as directed. |
| 82 | S&F in Repair Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed |
| 83 | S & F in Repair for soap dispenser with glass bottle complete all as specified and as directed. |
| 84 | S&F in Repair CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed. |
| 85 | S & F in Repairs chromiium plated Bottle trap of 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap & fixed complete all as specified and as directed. |
| 86 | Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 87 | Taking up or down steel tubing 25mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 88 | Dismantling water tanks capacity Exc 500 & n exc 1000 and removing to store complete all as specified and as directed. |
| 89 | S&F Rotational moulded polyethylene water storage tanks,1000ltr Capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I and as directed. |
| 90 | S&F in Repair CI floor traps 110mm bore with stainless steel grating including jointing to waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and as directed. |
| 91 | Taking down eaves gutter and rain water pipes (of any size and pattern) incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends 75mm bore of any radius with access door, complete all as specified and as directed. |
| 93 | S&F PVC (SWR) junction 75 mm bore (single T) with access door equal or unequal, complete all as specified and as directed. |
| 94 | Supply and fix on site LDPE septic tank (For 20 users) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. in conventional type complete all as specified and as directed. |
| 95 | M&L for Point wiring concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for: (a) One light point and one Exhaust fan controlled by one, one way switch SP 5 Amp |
| 96 | All as per Item Ser No.95.00 here in before but One 5 pin 5 Amp switch socket out let point on an same board. |
| 97 | All as per Item Ser No.95.00 here in before but One 5 pin 5 Amp switch socket out let point on an independent board. |
| 98 | All as per Item Ser No.95.00 here in before but One lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed |
| 99 | All as per Item Ser No.95.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15A independent, with cable 4 Sqmm and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 100 | S&F Switch piano SP flush type 5 Amp one way complete all as specified and as diected. |
| 101 | S&F Switch socket outlet 3 & 2 pin 5 amps flush/box type, complete all as specified and as dircted. |
| 102 | S&F Switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed. |
| 103 | S&F Ceiling rose surface bakelite PVC 65 x 20 mm size 3 terminal complete all as specified and as diected. |
| 104 | S&F Energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and as diected. |
| 105 | S&F 36W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. |
| 106 | S&F LED lamp 9 Watt, 230 Volt complete all as specified and as directed. |
| 107 | S&F Exhaust fan suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1200 RPM with steel metal body incl louvers complete all as specified and as directed. |
| 108 | S&F Metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed. |
| 109 | S&F MCB SPN 32 Amp 240 volt complete all as specified and as directed. |
| 110 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and as directed. |
| 111 | Supply, laying, testing and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm complete all as specified and as directed. |
| 112 | Supply and laying cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked complete all specified and as directed. |
| 113 | M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender