Tender For Nctps - Ii - M Ii Circle - Tm - S.Dn-Ii - Unit-Ii - Aoh 2026-27 - Cleaning And Inspection Of Journal And Thrust Bearings In Bfp,Bp, Drive Turbine And Cep, Inspection Of Coupling And Checking Of Alignments In Mdbfp & Tdbfps, Dismantling Of
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
2 days left
EMD
8800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps - Ii - M Ii Circle - Tm - S.Dn-Ii - Unit-Ii - Aoh 2026-27 - Cleaning And Inspection Of Journal And Thrust Bearings In Bfp,Bp, Drive Turbine And Cep, Inspection Of Coupling And Checking Of Alignments In Mdbfp & Tdbfps, Dismantling Of Bp, Inspection Of Pump Internals, Cleaning, Rectification Of Pump Internals, Assembling The Pump, Re-Babitting Of Bfp Thrust Pads.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning, Inspection, Rectification/ Replacing of Boiler feed pump Drive end Journal Bearing. |
| 2 | Cleaning, Inspection, Rectification/ Replacing of Boiler feed pump Non Drive end Journal Bearing |
| 3 | Cleaning, Inspection, Rectification/ Replacing of Boiler feed pump Thrust Bearing |
| 4 | Cleaning, Inspection, Rectification/ Replacing of Booster pump Drive end Journal Bearing. |
| 5 | Cleaning, Inspection, Rectification/ Replacing of Booster pump Non Drive end Journal Bearing |
| 6 | Cleaning, Inspection, Rectification/ Replacing of Booster pump Thrust Bearing |
| 7 | Cleaning, Inspection, Rectification, Replacing of Drive Turbine Front Journal Bearing. |
| 8 | Cleaning, Inspection, Rectification, Replacing of Drive Turbine Rear Journal Bearing. |
| 9 | Cleaning, Inspection, Rectification/ Replacing of CEP Journal cum thrust Bearing. |
| 10 | Inspection of Coupling, Checking the alignment between BP and Gear box. |
| 11 | Inspection of coupling, Checking of Alignment between Gear box and Drive Turbine. |
| 12 | Inspection of coupling, Checking of Alignment between BFP and Drive Turbine. |
| 13 | Inspection of coupling, Checking of Alignment between BP and Motor. |
| 14 | Inspection of coupling, Checking of Alignment between BFP and Hydraulic Coupling. |
| 15 | Inspection of coupling, Checking of Alignment between BFP Motor and Hydraulic Coupling. |
| 16 | Dismantling, cleaning, inspection, rectification/replacing of defective internals, reassembling and commissioning of the BFP R/c valves. |
| 17 | Charges for dismantling of booster pump (Frame No.FA1B75) including isolating the suction valve, draining the system, removal of coupling between BP and Gear box, removal of coupling hub from BP shaft, removal of lube oil supply and drain lines, removal of mechanical seal and water jacket cooling water lines, dismantling of DE and NDE bearing pedestal top cover, removal of Journal and thrust bearings, removal of pump casing bolts, removal of DE & NDE mechanical seals, water jackets, lifting of top casing, lifting of impeller assembly from the pump bottom casing. |
| 18 | Charges for cleaning of pump internals, top and bottom casing, removal of casing wear ring, inspection of pump internals, rectification of defects in internals such as removal of scoring marks if any in the impeller and casing wear rings, taking the measurements of wear rings, checking of clearance between the wear rings, replacing of gaskets in parting plane, water jackets, assembling the pump in sequence, normalising the cooling water and oil lines with new gaskets. |
| 19 | Charges for rebabbitting 1set (4 nos.) of BFP Thrust Bearing pads by removing the damaged babbit material by heating and scrapping, preparing the surface for pouring the white metal, melting the white metal, preparing fixture for poring the white metal, applying bonding material over the pad, pouring of white metal, slow cooling and machining to achieve the thickness, surface finish and Ultrasonic test to ensure bonding of the pad as per sample including the charges for materials, T&P and consumables etc., Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender