Tender For Construction Of Icds Centre Building, Pongali Amman Street At Vadavali North School, Vadavalli In Ward No.36, West Zone. Roc No.1543/2026/Md2
Tender Value
15 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Icds Centre Building, Pongali Amman Street At Vadavali North School, Vadavalli In Ward No.36, West Zone. Roc No.1543/2026/Md2
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge. |
| 2 | Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete complying with standard specification. |
| 3 | Supplying and erecting shuttering, including necessary supports, for plane surfaces such as RCC columns, footings, plinth beams, staircases, etc., at all floors, using mild steel sheets of size 90 cm × 60 cm and 10 gauge, stiffened with welded mild steel angles, for boarding supported by casuarina props at suitable intervals, etc., complete, complying with the standard specifications and as directed. |
| 4 | Supplying and erecting centering for sides and soffits, including supports and strutting up to 3.29 m height, for plane surfaces such as RCC slabs, rectangular beams, Tee beams, RCC beams, bed blocks, staircase waist and landing slabs, landing beams, canopies, etc., at all floors, with all cross-bracings, using mild steel sheets of size 90 cm × 60 cm and 10 gauge, stiffened with welded mild steel angles of size 25 mm × 25 mm × 3 mm for boarding, laid over country wood joists of size 10 cm × 6.5 cm, spaced at about 90 cm C/C, and supported by casuarina props of 10 cm to 13 cm diameter, spaced at 75 cm C/C, etc., complete as directed. |
| 5 | Supplying and fabricating R.T.S. rods of various diameters, including cutting, bending, placing in position and tying with suitable binding wire, etc., complete as directed. |
| 6 | Providing and laying cement concrete 1:1.5:3 (one cement, one and a half parts sand and three parts aggregate), using 20 mm gauge hard-broken granite stone jelly, for all RCC items of work, excluding the cost of centering, shuttering and reinforcement grill, but including curing, finishing, etc., complete, and also including fixing fan clamps and fixtures in RCC works wherever necessary, as directed by the departmental officer. |
| 7 | Supplying and filling with well gravel in layers, including watering, ramming, consolidation, etc., complete as directed. |
| 8 | Brickwork in cement mortar 1:5 mix (one cement and five sand), using First Class table-moulded burnt clay bricks of size 9\\" × 4½\\" × 3\\", for the following works, including curing, etc., complete. |
| 9 | Ground Floor level. |
| 10 | Plastering with cement mortar 1:3 mix (one cement and three sand), 12 mm thick, including all materials and labour, complete. |
| 11 | Plastering with cement mortar 1:5 mix (one cement and five sand), 12 mm thick, including all materials and labour, complete. |
| 12 | Supplying, fabricating and fixing M.S. Angles, M.S. Flats and M.S. Sheets, including one coat of red oxide primer, with all labour charges and materials, complete, complying with the standard specifications and drawings, including all costs and conveyance charges, etc., complete. |
| 13 | Supplying and fixing 50 mm thick PUF roofing sheets over rectangular hollow steel tubular box sections of size 98 mm × 50 mm × 3 mm, including one coat of primer, fixing in position with all necessary accessories, complete, complying with the standard specifications and as directed by the departmental officer |
| 14 | Paving the floor with vitrified floor tiles of size 60 cm × 60 cm, of approved brand and colour, including a base layer of cement mortar 1:3 mix (one cement and three sand), 20 mm thick, using first-quality vitrified/Marbonite tiles of size 60 cm × 60 cm, and pointing with colour cement neatly and fixing in position to make the surface perfectly smooth and aligned, etc., complete, complying with the standard |
| 15 | Painting with two coats of emulsion paint over a priming coat, including thorough cleaning, scraping and removal of dust, and including necessary Plaster of Paris (POP) putty work wherever required, etc., complete. |
| 16 | Painting new iron work such as doors, windows, grills, weld mesh screens, etc., with two coats of approved paint, including all necessary surface preparation, labour and materials, complete. |
| 17 | Wiring with 2 × 1.5 sq.mm. (22/0.3) PVC-insulated, single-core copper conductor of 1100 V grade, drawn through suitable PVC rigid pipes concealed in walls and ceilings, with PVC accessories, including a 3 mm thick Hylum sheet cover, with teak wood (TW) switch box and 5A, 3-pin switch and socket, and making good the concealed portion with suitable colour finish, for PVC concealed light/fan point with electronic regulator (5 points per coil), complete as directed. |
| 18 | wiring done using 2 × 1.5 sq.mm (22/0.3) insulated single-core unsheathed PVC copper conductor cable of 1100V grade. The cable is run inside a suitable heavy-gauge MS conduit pipe fixed on the wall and ceiling, along with MS accessories, installed flush with the wall. It includes a 150mm × 100mm × 75mm MS switch box fitted with a 3mm thick hylum sheet cover, for a 5A 3-pin non-interlocking CS plug. The work also includes a continuous earth wire connection using 14 SWG TC wire, and making good the concealed portion with a suitable matching colour — all for one concealed plug point. |
| 19 | supply and fixing of a single-box-type 4-foot 40W fluorescent fitting, complete with a copper choke and condenser. It includes conduit pipe suspension from the ceiling, along with PVC unsheathed copper lead wires running from the terminals to the fitting, fitted with a protective tube. |
| 20 | supply and fixing of a 1200mm (48\\") AC ceiling fan, complete with a stepped electronic 300W regulator, mounted on a 1-meter down rod using the existing ceiling clamp. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender