Educational and Research Institute Boards / Undertakings / PSU Closing in 6 days TDR #57498988

Tender For Aanganwadi Centar Major Repair Work At Block-Bali Cluster-3 (Fatapura, Dhanda, Mataji Vara, Falna Ganv-2)

Issued by Boards / Undertakings / PSU · Pali, Rajasthan
Tender Value
5.96 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
11920
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pali → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Aanganwadi Centar Major Repair Work At Block-Bali Cluster-3 (Fatapura, Dhanda, Mataji Vara, Falna Ganv-2)

BOQ

Name of Work:- Aanganwadi Centar Major Repair Work at Block-Bali Cluster-3 (Fatapura, Dhanda, Mataji Vara, Falna Ganv-2)
Sl. No. Item Description
1AWC- Fatapura Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
2Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead
3Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size).
4Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik
5Inner
6Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate
7Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
8Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding:
9Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer.
10Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only
11Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance.
12Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick.
13Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C
14Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete.
15AWC- Dhanda Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
16Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size)
17Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.
18Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
19Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate
20Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm :
21Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm
22Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance.
23Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only
24Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick.
25Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters.
26Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters.
27Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and weldedwith 15x3 mm lugs 10cm long embedded in cement concreteblocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as require including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer.
28Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal)
29Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00
30Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead
31Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik
32Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work.
33AWC- Mataji Vara Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
34Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead
35Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.
36Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size).
37Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik
38Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate
39Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm
40Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. New
41Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding:
42Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade One or more coats on old work.
43Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only
44Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance.
45Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick.
46Supplying and fixing stone lintels/bed plates of approvedquarry rough dressed in cement mortar 1:4 : Upto 15 cm. thick. C
47Providing and fixing Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, SillsCounters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with whitecement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab includinggrinding, rubbing and polishing complete.
48AWC- Falna Ganv-2 Block-BaliDismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
49Grading roof for water proofing treatment with waterproffing compound 10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size)
50Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.
51Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
52Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, making of lines or groove etccomplete but excluding the cost of nosing of steps etc.complete. 11.3.1 40mm thick with 20mm thick nominal size aggregate
53Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)11.18.1 For area of each slab from 901 to 2000 Sq.Cm :
54Kota stone slabs 25 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with grey cement slurrymixed with pigment to match the shade of the slabs, includingrubbing and polishing complete11.19.1 For area of each slab upto 2001 Sqcm
55Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance.
56Providing and fixing steel gate, grating , and grills made ofangles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used orgrill made by flats only
57Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick.
58Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding:12.37.1 New work (two or more coats) over and includingscrapping and priming coat with cement primer. (Internal)
59Finishing wall with water proofing cement paint of approvedbrand and manufacture and or required shade to give an evenshade including all scaffolding: (External)(A)12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00
60Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr lead
61Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20MM Thik
62Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :One or more coats on old work.
63Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57498988
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 5.96 Lakhs
LAST DATE 21-09-2026
Authority
Authority Name Rajasthan Council Of School Education
Work Description Tender for Aanganwadi Centar Major Repair Work At Block-Bali Cluster-3 (Fatapura, Dhanda, Mataji Vara, Falna Ganv-2)
Basic Detail
Tender No Nit 03 Civil 2026-27 District Level
Bidding Type Tender
Location
City Pali
State Rajasthan
Key Dates
Publish Date 14 Sep 2026
Submission Date 21 Sep 2026
Open Date 22 Sep 2026
Finance
Tender Value 5.96 Lakhs
Tender Fee 1000
EMD 11920
Exemption Available
Document List
BOQ_1059625.xls
dc67cfff-2f96-4e50-8480-7a9fee732b06.html
Tendernotice_1.pdf
Tendernotice_2 (16).pdf
Tendernotice_3 (3).pdf
Tendernotice_4 (5).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Sep 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1059625.xls

html

dc67cfff-2f96-4e50-8480-7a9fee732b06.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2 (16).pdf

pdf

Tendernotice_3 (3).pdf

pdf

Tendernotice_4 (5).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders