Tender For For Carrying Out Various Electrical Maintenance Works Of 33 11 Kv Sub Stations Switchyards 33 Kv And 11 Kv Lines Distribution Transformers And Associated Electrical Distribution System Under O And M Head 2026 27 In Edd Hapur
Tender Value
9.80 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
9800
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For Carrying Out Various Electrical Maintenance Works Of 33 11 Kv Sub Stations Switchyards 33 Kv And 11 Kv Lines Distribution Transformers And Associated Electrical Distribution System Under O And M Head 2026 27 In Edd Hapur
BOQ
| Sl. No. | Item Description |
| 1 | FOR CARRYING OUT THE WORKS OF MINOR REPAIRING OF 25, 63, 100 KVA DISTRIBUTION T/Fs INSTALLAED AT VARIOUS PLACES (RUNNING CONTRACT), UNDER THE JURISDICTION OF EDD- HAPUR, UNDER EDC., HAPUR. |
| 2 | Minor repairing of 25 KVA, 63 KVA & 100 KVA Distribution Transformers at site of installation, including replacement of gasket, packing, silica gel, aluminium lugs, bushing rods and other minor required components/accessories, complete in all respect, including all labour, tools & tackles and required materials to be provided by the contractor, except reclaimed transformer oil, if required, to be provided by the department. |
| 3 | FOR REPLACEMENT, STRAIGHTENING, AND WELDING OF BROKEN POLES (PCC / ST) OF 33 KV, 11 KV, AND LT LINES DUE TO VARIOUS REASONS; REPLACEMENT OF WORN-OUT CONDUCTORS; TIGHTENING AND RAISING SAGGING CONDUCTORS; AND OTHER RELATED WORKS |
| 4 | carriage of departmental materials from Electricity Store Centre at Hapur/J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0-50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 5 | STP Pole 11/13 mtr |
| 6 | PCC Pole 8.5/9 mtr |
| 7 | PCC Pole 11 mtr |
| 8 | ACSR Conductor (Dog, Weasel, Rabbit) |
| 9 | ABC Conductor (all sizes) |
| 10 | 11 KV XLPE Cable (3x35-3x70+3x120-3x185-3x300sqmm) |
| 11 | 33 KV XLPE Cable (3x185/240/300 Sqmm) |
| 12 | Re-straightening of Tilted Pole after digging of pit of suitable size adjustment of PCC/ST Poles and completion work properly, as per RESPO/Norms and as per direction of site incharge. |
| 13 | Cutting of tree branches along the route of the line and disposal of the same at suitable places and as per direction of site incharge. |
| 14 | Repair and replacement of damaged stay and concreting of stay with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge. |
| 15 | Guarding of 11/33 KV Line & repair of damaged guarding with all accessories complete in all respect as per RESPO/Norms and as per direction of site incharge. |
| 16 | Repairing of broken/rusted pole at site by digging the base of round pole/joist approx. 3' depth straightening of pole in rest position by welding work including dismantling of L.T/H.T. line sagging and resagging after welding & refling the base of pole with sand, concrete and cement. Welding work by providing 1 mtr. long four pieces of M.S Angle 50x50x6 mm and 2 nos. M.S. Round ring in each pole of 12 mm thick for smooth working and Grouting of the same pole/supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge. |
| 17 | Erection, fixing and grouting of 8.5 mtr. long PCC pole for LT line, including excavation of suitable pits, positioning, alignment, fixing and grouting of pole with all requisite accessories as per RESPO drawings/specifications/norms, including providing and fixing LT pin clamps, M.S. flat of size 50×6 mm, shackle insulators of size 75×90 mm and required size nuts, bolts and other necessary hardware, complete in all respects. |
| 18 | Erection, Fixing and Grouting of PCC Pole 8.5 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 19 | Erection, Fixing and Grouting of PCC/ST. Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 20 | PCC Pole |
| 21 | S.T. Pole |
| 22 | Erection, Fixing and Grouting of following 11 mtr. long pole in 33 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts. |
| 23 | PCC Pole |
| 24 | S.T. Pole |
| 25 | Grouting of following PCC/STP Pole supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials. |
| 26 | Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops. |
| 27 | Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts and lug |
| 28 | Dismantling & removal of existing ACSR Conductor and opening of all accessories and bundling the same at various places. |
| 29 | Stringging, Saggging of old loose ACSR Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms. |
| 30 | (a) ABC Conductor (all sizes) |
| 31 | (b) ACSR Weasel Conductor |
| 32 | (c) ACSR Rabbit Conductor |
| 33 | (d) ACSR Dog Conductor |
| 34 | Replacement & fixing of damage X-Arm of 11 KV /33 KV Line. |
| 35 | Replacement & fixing of damage 11 KV Disc Insulator of 11 KV/33 KV Line. |
| 36 | Dismantling & Removal of old and used STP (Scrap)/PCC Pole, after digging of pit of suitable size and removal of all accessoires as per RESPO/Drawing Norms. |
| 37 | Laying Stringging & Final Saggging of ACSR Conductor and binding from insulator & proper completion of work as per RESPO/Drawing Norms. |
| 38 | (a) ABC Conductor (all sizes) |
| 39 | (b) ACSR Weasel Conductor |
| 40 | (c) ACSR Rabbit Conductor |
| 41 | (d) ACSR Dog Conductor |
| 42 | Carriage of old & damaged STP Scrap Pole, from site of work to JE Store/Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road. |
| 43 | Carriage of old & damaged scrap ABC/ACSR Conductor, from site of work to Electricity Store Centre Hapur including loading and unloading at both the ends on Kachha and Packka road. |
| 44 | Jumpering work properly of 11 KV & 33 KV line as per RESPO/Norms. Providing proper size of clamp nut bolt, etc by contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender