Tender for Tender for Repair And Renovation Work Of Auditorium Conventional Center Of Departed Area Sandila Hardoi.
Tender Value
33.23 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
16 days left
EMD
67000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Work Of Auditorium Conventional Center Of Departed Area Sandila Hardoi.
BOQ
| Sl. No. | Item Description |
| 1 | Direct Expansion air-conditioners with inverter technology,Supply & installation of split Direct Expansion air-conditioners suitable for operation on A/C supply single phase 50 Hz 230Volts with hermetically sealed compressor with air cooled condenser with DC inverter technology, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery-operated wireless remote unit.. As per Electrical Sor SI-1504(C) 2.0 TR (i)BEE Star Rated:5Star,EER 3.4 |
| 2 | S/f of Wall Mounted Hi Low Cut off Stablizer with TDR ,Voltage range 140-280V complete in all respect i/c all etc V Guard/ Marc/Stamb /Microtek/Servikon (5 KVA Voltage Stablizer).AS PER SE RED APPROVED. |
| 3 | Supply and installation testing and commissioning of interconnecting copper pipe for 1.5 TR and 1 TR high wall unit for gas and liquied line with 10mm thick closed cell -0 nitral rubber insulation between indoor & out door units . All Piping inside the room shall be properly supported on GI Hanger / Support as requied.AS PER SE RED APPROVED. |
| 4 | Supply and installation testing and commissioning of 19/25 mm PVC conduit pipe to be used as drain water pipe through holes as made above Split A.Cs.AS PER SE RED APPROVED. |
| 5 | Supply and fixing 20 amp 240v SPN industrial type socket outlet with 2 Pole & earth metal enclosed plug top along with 20 amp C Curve SP MCB DB Complte etc. DSR (2025)-2.18 |
| 6 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.DSR(2025) 1.21.2 (25mm) |
| 7 | P/F of G.I. Chain Link Fencing Mesh(typically Size 50x50 mm made of G.I. Wire of Dia 4mm) i/c all etc.As per SE RED Approved. |
| 8 | S/F OF PVC pannal in ceiling 1.25 mm thick with aluminium pipe chanel i/c fixing of section L,U corners Bend and screw etc. materials and labour as requaired for proper completion of the work.I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 9 | S/F OF ACRYLIC CHARKOL GLOSY SHEET(SHEET LAMINA)1.50 TO 2MM THICK etc. materials and labour as requaired for proper completion of the work.I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 10 | S/F of Premium and High-Gloss Finish (Premium / Imported UV Marble Sheet).I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 11 | SUPPLY OF ALL IN ONE DESKTOP COMPUTER SYSTEM SET(HP 27-cr1026in 68.58 cm All-in-One Desktop features a large 27-inch FHD display, 16GB RAM, and 512GB SSD storage, providing excellent multitasking performance OR Lenovo A100 AIO f0j6005gin comes with a 23.8-inch Full HD display, efficient storage, and a sleek design tailored for daily workspace productivity.Key Specifications:Processor: Reliable core processors suitable for handling office documents, spreadsheets, and management software smoothly.Memory & Storage: Typically equipped with 8GB to 16GB RAM and fast 512GB SSD storage for quick boot times.Peripherals: Usually bundled with a matching wireless keyboard, mouse, and integrated webcams.OR Acer Aspire C27 (i5 model): It is powered by a 13th Generation Intel Core i5-13420H processor. This is a 13th-generation 'H-series' processor known for high performance and smooth multitasking.)I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 12 | SUPPLY OF ALL IN ONE HEAVY DUTY MULTIFUNCTION PRINTER / SCANNER SYSTEM Mid-to-Heavy Duty Office Class (Ink Tank / Business InkJet with ADF):Popular Examples: Canon Maxify series, HP Smart Tank Enterprise/Series (Featuring heavy monthly duty cycles, auto-duplex, network/Wi-Fi connectivity, and fast printing speeds).I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 13 | SUPPLY & FIXING OF Core Video Conferencing Display (Core Display & VC System):Items:75-inch or 85-inch commercial interactive flat panel / smart board (with built-in 4K camera and AI mic array) or a high-grade PTZ camera with a large commercial display screen ETC. I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 14 | SUPPLY & FIXING OF Audio & Sound System:Items: Ceiling/wall-mounted speakers for a large hall (4 units), power amplifier, and essential delegate gooseneck microphone units or wireless conference mics required for official meetings. I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 15 | Processing, Control, and Switching:Items: Audio Digital Signal Processor (DSP), OPS (Windows i5/i7) module, and signal cabling.I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 16 | integration, Installation, and Wiring:Items: Rack mount, concealed cabling, Online UPS backup, and on-site engineering installation.I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 17 | PROVIDING & FIXING OF PREMIUM VERTICAL BLINDS I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 18 | SUPPLY OF MID BACK ERGONOMIC MESH OFFICE CHAIR I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 19 | PROVIDING & FIXING OF PREMIUM RUNNING CABINET I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 20 | SUPPLY OF MAIN PREMIUM EXECUTIVE OFFICE TABLE I/C ALL COMPLETION OF WORK.AS PER SE RED APPROVED. |
| 21 | SUPPLY OF PREMIUM EXECUTIVE HIGH BACK OFFICE CHAIR WITH RIBBED CUSION DESIGN I/C ALL ETC.AS PER SE RED APPROVED. |
| 22 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor(whereever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.DSR 9.147. A4.3 |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). Above Plinth Lvl as SI No-5.3 |
| 24 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around as per DSR 22.6 |
| 25 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge.DSR(2022) 15.7.4 FOR FIXING uPVC DOOR & WINDOW |
| 26 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. completeat all levels.DSR 8.2.2.2 |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Tile Size 600x600mm.DSR 11.41.2 |
| 28 | Brick work with common burnt clay bricks of Class-150 in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per SI no 6.4.2 |
| 29 | 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) as per IS 13.4.2 |
| 30 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C DSR 1.10.3 |
| 31 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.14.2 |
| 32 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR 1.14.3 |
| 33 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire DSR 1.14.9 |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.DSR 1.31 |
| 35 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.DSR 1.32 |
| 36 | Supply & fixing of tubelight with metal heavy duty box type batten light fitting 1x22 Watt suitable for upto 1x22 Watt LED polycorbonate complete including tube suitable for both surface & suspended complete in all respects. CAT-AAA 2620 system lumens> 120Lm/W, PF>0.95, 10% at full load CRI>80, sheet thickness min 0.8 mm, tube with aluminium heat sink> 300, V over volatge protection 2.5 KV internal Surge Protection with (5 year warrenty) (1175 * 0.8475) PWD SOR 2024 23.07 |
| 37 | Supply & fixing of IP 20 front Lit mid power SDM type LED light surface mounting round 6 to 9 Watt cutout min. 150mm Ht. min. 40mm/ LED down lighter having powder coated die cast aluminium housing with heat sink, high purity transmisivity UV stablized non yellowish diffuser/ reflector for uniform light distribution detachable driver set suitable for 24 hrs continuous operation complete in all respects. CAT-AAA 220-1080 system lumens> 120Lm/W, PF>0.95, 10% at full load CRI>80, sheet thickness min 0.8 mm, tube with aluminium heat sink> 300, V over volatge protection 2.5 KV internal Surge Protection with (5 year warrenty) (955 * 0.8475) PWD SOR 2024 23.01 |
| 38 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min,350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.DSR19.1 |
| 39 | Supplying and fixing 3pin, 5A ceiling rose on the existing junction box/ wooden block including connections etc. as required.DSR 1.33 |
| 40 | Supplying and fixing brass batten/ angle holder including connection etc. as required.DSR 1.34 |
| 41 | Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.DSR 1.35 |
| 42 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required DSR 1.57 |
| 43 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 4 way (4 + 12), Double door DSR 2.4.1 |
| 44 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole DSR 2.10.1 |
| 45 | Single pole and neutral DSR 2.10.2 |
| 46 | Double pole DSR 2.10.3 |
| 47 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc as required.DSR 2.11 |
| 48 | Supplying and fixing of 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB 63 Amp. TP MCB(10 KA) C Curv -CAT A PWD 1017 |
| 49 | MCB 40 Amp. TP MCB(10 KA) C Curv -CAT A PWD 1016 |
| 50 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelover a cushionof 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in allrespect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.35 sq. mm 3-1/2 core (724 x 0.8475) PWD SOR 2024 20a.1.11 |
| 51 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm DSR 7.1 |
| 52 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm (32mm) DSR 9.1.21 |
| 53 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 5.6 |
| 54 | Providing and fixing 4.0 mm dia copper wire on surface or in recess for loop earthing as required.DSR 5.17 |
| 55 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.DSR 2.22 |
| 56 | Supplying and fixing following modular switch/ socket (RJ 45) UTP cat 6 tooless with shutter 1M White) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Lan Point |
| 57 | Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc. as required.1 or 2 Module (75mm x 75mm) DSR 1.27.1 |
| 58 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 1.26 |
| 59 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable DSR 1.53.1 |
| 60 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm DSR 1.21.2 |
| 61 | S/F of Inaugration Stone i/c all Completion of work etc.As Per SE RED APPROVED. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender