Tender For Upgradation Of Cooperative Infrastructure Of Pacs Chitragam (Mini Super Bazar Chitragam).
Tender Value
49.63 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
17 days left
EMD
99270
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Cooperative Infrastructure Of Pacs Chitragam (Mini Super Bazar Chitragam).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Filling available excavated earth (exluding rock) in trenchs, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidated each doposited layer by ramming and watering, lead upto 50 m lift upto 1.5m |
| 3 | Providing and laying of stone soling (hand packed) including watering,dressing and ramming with all carriages loading,unloading and stacking etc. |
| 4 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost of material involved complete. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 6 | Dry random rubble masonary with hard stone in foundation and plinth: with bond stone including carriage.(Nallah) Including carriage. |
| 7 | Supplying and filling of RBM in plinth incl. spreading, dressing,watering with all carrriage etc complete |
| 8 | Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete in sub structure and superstructure Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Centering and shuttering including strutting , proping etc. and removal of form for : foundation, footings, basis of columns etc, for mass concrete. |
| 13 | Centering and shuttering including strutting , proping etc. and removal of form for : lintel beams , plinth beams ,girders, bressumers and cantelevers. |
| 14 | Centering and shuttering including strutting , proping etc. and removal of form for : columns , plillars , piers, abutments, posts and struts. |
| 15 | Centering and shuttering including strutting , proping etc. and removal of form for : Suspended floors, roofs, landings , balconies and access platforms. |
| 16 | Centering and shuttering including strutting , proping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level all carriages complete |
| 18 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete.(For Septic Tank). |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported KD Wood or equivalent. |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) .Imported KD Wood or equivalent. 35mm thick. |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Imported KD Wood or equivalent. |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 23 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with : 4 mm glass panes |
| 24 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 125mm |
| 25 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 75mm |
| 26 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 27 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 28 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws eqivalent |
| 29 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc complete: 300x16mm |
| 30 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 31 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 32 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 33 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 35 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete Raj Nagar plain 18mm |
| 36 | Extra for pre finished nosing to treads of steps of marble stone. |
| 37 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge. |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. (Triple Layer) |
| 40 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 43 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 44 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:32mm dia |
| 45 | Providing and fixing Jali for water closet or wash basin including PVC Waste fittings complete. |
| 46 | Providing and fixing PVC Pipes class c pipe including Soill, waste and vent pipes Type-B. 100mm |
| 47 | Providing and fixing PVC Pipes class c pipe including Soill, waste and vent pipes Type-B. 75mm |
| 48 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) |
| 49 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4) |
| 50 | Providing & Fixing PVC ( Prince Make) following fittings complete |
| 51 | Door Tee 100mm size |
| 52 | Door Tee 75mm size |
| 53 | PVC collar 100mm |
| 54 | PVC collar 75mm |
| 55 | PVC Reducer 100x75mm |
| 56 | Floor Trap 100 mm size |
| 57 | Plain Bend 100 mm size |
| 58 | Plain Bend 75 mm size |
| 59 | Door bend 100mm |
| 60 | Door bend 75mm |
| 61 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge |
| 62 | Nipples of different sizes |
| 63 | Bib cock |
| 64 | Angle valve |
| 65 | Ball valve |
| 66 | Coupling |
| 67 | Basin Mixer |
| 68 | Providing and fixing PTMT liquid soap container |
| 69 | C P Gratings |
| 70 | Wall Mixer |
| 71 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size ( 1'-6\\" x1'-6\\" x 1'-6\\") inside size |
| 72 | Providng and Fixing of Geysers 50Litre 2000watt storage water heater (white) including all fittings and fixtures make : venus, jacquar, racold or equivalent. |
| 73 | Structural steel welded in built up sections trusses and framed work incld cutting,hoisting fixing in positon and applying a priming coat of approved steel primer incl. painting all complete. Welded. |
| 74 | Providing and fixing high rib color coated corrugated galvanized PPGI sheets 1000-1020mm cover width 28-35mm high crests at 250-255mm TCT (total coated thickness) high tensile SMP galvalumesteel with silicon modified polester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyster back coat over 5 micron primer coats on both surfaces including side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area) 0.5mm thick ( TATA, JSW or EQ brand) i/c all carriages/H/Load i/c 60cm wide ridges and valleys wherever required i/c all fittings and fixtures in roof sheeting (Tile Profile). |
| 75 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 76 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 77 | Carriage for Different Materials. |
| 78 | Crushed aggregate average lead of 10 Kms |
| 79 | Sand average lead of 15 kms. |
| 80 | Electrical Part |
| 81 | Wiring for light point/fan point/exhaust fan point/call bell point with 2 x 1.5 sq.mm PVC insulated, FRLS copper conductor, 1100 V grade wires, conforming to IS 694, with conductors as per IS 8130 and insulation as per IS 5831, and having fire performance in accordance with IEC 60332, ISI marked with valid BIS license, complete with all accessories, (Havell/ Polycab/APAR/ Fenolex/KEI/RR kabel/Anchor or OEMs/ firms holding ISO 9001 certification (Quality Management System) and shall be supplied with routine test certificates, and any material not conforming to the specified standards shall be rejected), complete with all accessories as required; single core cable in surface/recessed medium class PVC conduit (including cost of conduit), with modular switch (Legrand Mylinc /SSK NV/Schneider Livia/Crabtree athena make.), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 82 | Group-A |
| 83 | Group-C |
| 84 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit (including cost of conduit) |
| 85 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box, connections etc. as required. Modular Switch & Socket:- (Legrand Mylinc /SSK NV/schneider Livia/Crabtree athena make.) |
| 86 | Wiring for lighting circuits, inverter circuits/ 6-10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor Havell/Polycab/APAR/Fenolex/KEI/RR kabel/Anchor make) as described in item no 1 as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit,( including cost of conduit) alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 87 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 no. 3-pin 5-10 A modular socket outlet and 2 no. 5-10 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- (Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.) |
| 88 | Supplying and fixing of following modular switch/ socket/indicator on the existing modular plate and switch box including connections but excluding modular plate etc. as required. i. 3 pin 5/6A socket outlet |
| 89 | Supplying and fixing of following modular switch/ socket/indicator on the existing modular plate and switch box including connections but excluding modular plate etc. as required. i. Indicator |
| 90 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Havell/Polycab/APAR/Fenolex/KEI/RR kabel/Anchor make) as described in item no 1, single core cable in surface/ recessed medium class PVC conduit as required. Including cost of conduit. |
| 91 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (Lighting Circuit) |
| 92 | S/F testing and comm. of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve ,Schneider / Legrand / ABB, / Havells / Siemens/ L&T / Hager /BCH make OR OEMs / firms holding ISO 9001 certification (Quality Management System) as directed by engineer in charge. |
| 93 | 6-32 Amp SP MCB |
| 94 | Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates. |
| 95 | Supplying and fixing following way, Horizontal type,Single pole and neutral, sheet steel, MCB distribution board, (legrand/ Shnider/Hager/ABB make) 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 96 | 12 way , Double door |
| 97 | Supply installation testing and commissioning of 12 W LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W. The input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt. approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures also. (Philips/ Havel's /Wipro make / sample to be approved before installation). |
| 98 | Supply, installation, testing and commissioning of 3 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections. |
| 99 | Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor Roma plus/SSK NV/ equivalent make. |
| 100 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 101 | S/Laying ( partly overhead/ partly underground) , testing and commissioning of XLPE aluminum armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havell/Eq. standard make as directed by engineer in charge and making end termination with brass compression gland and aluminum lugs of required size. |
| 102 | 16 sq.mm 2 core ( armoured) |
| 103 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 104 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 105 | NORMAL INCOMING: |
| 106 | Adj. TMR Based MCCB 63 Amps DP Icu=Ics=100% Breaking Capacity 16 KA ROH Legrand/ Shnider/Siemensi/ABB make. |
| 107 | b) 2 No. of Aluminium Bus Bar of 100 Amp. |
| 108 | c)Digital meters and phase indicators-1 set. |
| 109 | OUTGOING: |
| 110 | 32 amp DP MCB C curve 10 K Legrand/ Shnider acti-9/ABB make, sample to be approved before installation.. |
| 111 | Providing of chemical earthing as per IS standards by way of digging 6 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the electrode with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. |
| 112 | Mechanical Part |
| 113 | Fire Fighting System |
| 114 | Supply and installation of Carbon-dioxide fire extinguishers confirming to IS:15683 marking, with squeeze grip valve operating temperature (-30 Degree C) to (+60 Degree C) for class 34B type of Fire fitted with PVC Horn complete in all respect and fixed to wall with brackets with rawl plug / dash fasteners complete with internal charge. The Carbon-dioxide filled in the cylinder must be as per IS 15222. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM.Capacity: 4.5 kg (I.S.I marked). |
| 115 | Providing and Fixing of ISI marked (IS:15683:2006) portable ABC type portable extinguisher of capacity 6 kg, dry powder type (Gas Cartridge, MAP 70%) confirming to IS:15683:2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS:15683:2006 complete with standard discharge valve with tube, CI bracket for wall mounting. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM. |
| 116 | Providing and fixing (In proper concrete foundation) of fire bucket stands including 6 No. buckets of 9 litre capacity with canopy at designated locations filled with dry sand. |
| 117 | Supply and Fixing of Glow-in-Dark Fire exit signages. This sign may be used to indicate all exits which will be used in the event of an emergency. It shall be accompanied by an arrow as per IS-1249(1988) standards. Size: 300 x 100 mm. Colour: Green. Material: Polyvinyl Chloride. Mounting Type: Wall Mount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender