Tender For Revival/Restoration Of Ziyarat Sharief Syed Murrad Hussain Shah On Heritage Pattern At Kamalkot Dubjan
Tender Value
1.17 Crore
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival/Restoration Of Ziyarat Sharief Syed Murrad Hussain Shah On Heritage Pattern At Kamalkot Dubjan
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Main Shrine |
| 2 | Dismantling roofing including ridges, hips valleys and girders etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : |
| 5 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 7 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 8 | Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete |
| 9 | Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One or two face dressed Fine chisel dressed including all carriages complete |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure upto floor V level including curing in :Cement mortar 1:4( 1 cement : 4 coarse sand) including all carriages complete |
| 18 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) including all carriages comeplete |
| 19 | Ruled/ Flush pointing on Red sand stone masonry surface/Brick Work with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 20 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge 18 mm thick |
| 21 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 22 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc, including priming coat complete:Second Class Kail Wood |
| 23 | 12 mm thick marin plywood conforming to IS:710 i/c carriage and fixing charges all complete. |
| 24 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Chaar Gul |
| 25 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete. Second class Deodar Wood 12 mm thick |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Second class kail wood |
| 27 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 28 | Providing and fixing 35 mm panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge in 2nd class kail wood |
| 29 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : 2nd class kail wood |
| 30 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood |
| 31 | Providing & fixing of glass panes 5mm thick @10kg/sqm for windows shutters. With 0.5\\" ornamental kail wood beading bedded in putty and fixed with nails. |
| 32 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading |
| 33 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 34 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 35 | Providing and fixing Hi- Rib colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick |
| 36 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 37 | Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size) i/c painting complete job. 2nd class kail wood |
| 38 | Carriage of material from source to actual site of work |
| 39 | Aggregate by mechanical means |
| 40 | Aggregate by manual means |
| 41 | Sand by mechanical means |
| 42 | Sand by by manual means |
| 43 | Stones by mechanical means |
| 44 | Stones by by manual means |
| 45 | Provding and fixing of Brass type Masjid Minarets having mininmum 3.5 feet height including all fittings, fixtures etc all as per the directions of engineer incharge with all carriages etc complete |
| 46 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All Kinds of soil |
| 47 | Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete |
| 48 | Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete |
| 49 | Providing and laying in position cement concrete 1:3:6 (1 Cement:3 Corase sand: 6 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level and abobe plinth level upto required height including all carriages complete |
| 50 | Centering and shuttering including strutting, propping etc and removal of form work for foundation, footings etc etc |
| 51 | Providing and laying 50 mm thick Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate)with 20mm nominal size stone aggregate. finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. |
| 52 | Pedestrian Path |
| 53 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All Kinds of soil |
| 54 | Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete |
| 55 | Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete |
| 56 | Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level and abobe plinth level upto required height including all carriages complete |
| 57 | Supply and filling of nallah GSB/ Nallah Muck of specified grade and size hand packed including ramming compacting, watering etc with all leads lifts and carriage complete. |
| 58 | Providing and laying of Barmulla Stones of Specified Size and Thickness upto Average size of 25mm in threads and landings including landings including poiting in Lime Surkhi 1:2 Mix over and includinf a levelling under coat wherever necessary incluing all carriages compete |
| 59 | Carriage of material from source to actual site of work.by mechanical means |
| 60 | Stone aggregate |
| 61 | Carriage of material from source to actual site of work.by manual means |
| 62 | Stone aggregate |
| 63 | Chain Link Fencing |
| 64 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All Kinds of soil |
| 65 | Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete |
| 66 | Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete |
| 67 | Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level and abobe plinth level upto required height including all carriages complete |
| 68 | Centering and shuttering including strutting, propping etc and removal of form work for foundations, footings, bases of columns etc |
| 69 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 70 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 71 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm |
| 72 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 73 | Carriage of material from source to actual site of work.by mechanical means |
| 74 | Stone aggregate 20mm |
| 75 | Stone aggregate 40mm |
| 76 | Carriage of material from source to actual site of work.by manual means |
| 77 | Stone aggregate 20mm |
| 78 | Stone aggregate 40mm |
| 79 | Construction of Wuzu Khana |
| 80 | Earth work in excavation by manual means in trenches for foundations, drains and the like not exceeding 10 sqm on plan, including dressing of Sides and ramming of bottoms and disposal of surplus excavated earth as directed: ALL kinds of Soil |
| 81 | Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete |
| 82 | Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level |
| 83 | Providing and laying in position cement concrete 1:2:4 (1 Cement:2 Corase sand: 4 grade stone aggregate 20 mm nominal size crushed including curing but excluding the cost of centring and shuttering upto plinth level and above plinth level upto to required height |
| 84 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 85 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe 500D or more. Including all carriages complete |
| 86 | Centering and shuttering including strutting, propping etc and removal of form work for foundations, footings, bases of columns etc |
| 87 | Centering and shuttering including strutting, propping etc and removal of the same for slabs , Suspended floors, roofs,landings, balconies and access platforms etc complete. |
| 88 | Centering and shuttering including strutting, propping etc and removal of the same for lintels, girders, bressumers, cantilevers, beams etc complete. |
| 89 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 90 | Supply and filling in Rooms using GSB/Nallah Muck including levellilng , watering ramming and consolidation all as per the directions of engineer incharge including loading, unloading and all carriages complete. |
| 91 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth and superstructure upto floor V level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)incl all carriages complete |
| 92 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z. sections and other sections of approved make confirming to IS:733 and IS:1285 fixed with dash fastener of required dia and size including necessary filling up of gaps of junctions i.e at top bottom and sides with required EPDM rubber / neoprene-gasket felt etc. Aluminium sections shall be mechanically wherever required including cleat angle, aluminium sanp beeding for glazing/ panelling, cp brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge incl. glazing panelling and dash fasteners including all required Standard hardware etc Complete For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 93 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 94 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors and nuts and bolts complete. Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4 mm aperture on both sides. |
| 95 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides. |
| 96 | Providing and fixing hardware items ISI marked of required colour or shade with necessary screws etc. complete Ornamental Brass Type |
| 97 | Aluminium Tower Bolts 6'' inch |
| 98 | Aluminium Tower Bolts 4'' inch |
| 99 | Aluminium Handles 4'' inch |
| 100 | Aluminium Handles 6'' inch |
| 101 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 102 | Providing and fixing Hi Rib galvanized coloured iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required Including ridges, hips, valleys of high strength SMP sheets Complete |
| 103 | 12 mm cement plaster of mix 1:6 (1 Cement: 6Fine sand) Complete. |
| 104 | 6 mm cement plaster of mix 1:3 (1 Cement: 3Fine sand) Complete. |
| 105 | 15 mm cement plaster of mix 1:6 (1 Cement: 6 Fine sand) Complete. |
| 106 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 107 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 108 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 109 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 110 | Providing and fixing stainless steel 18 Guage (Grade 304) railing made of Hollow tubes channels, plates etc. Like Jindal Including master pillar and boster on alternate steps or equivalant including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 111 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 112 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes (Triple layer) but without fittings and the base support for tank, including ball cock valve |
| 113 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 114 | Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 (15 mm nominal bore) 600x450mm with single 15mm C.P brass piller taps |
| 115 | Providing and fixing soil waste and vent pipes IS 13592 & Fittings(IS: 14735) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions,clean out plug, cowls. Offsets, collar, M.S Holder-bat clamps, access pieces, trap of self cleansing design etc complete including jointing (100 mm Dia)Type B |
| 116 | Providing and fixing soil waste and vent pipes IS 13592 & Fittings(IS: 14735) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions,clean out plug, cowls. Offsets, collar, M.S Holder-bat clamps, access pieces, trap of self cleansing design etc complete including jointing (75 mm Dia)Type B |
| 117 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size ( 1'-6\\" x1'-6\\" x 1'-6\\") inside size |
| 118 | Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required complete |
| 119 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4) 15mm dia. Nominal bore |
| 120 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 16mm OD(SDR-7.4) 32 mm dia. Nominal bore |
| 121 | Providing and fixing of various PVC Sanitary Fittings |
| 122 | Door Tee 4'' |
| 123 | Reducer T ( 4''/ 3\\") |
| 124 | Union ( 3''/ 4\\") |
| 125 | Cowl and Cap |
| 126 | Tanky Nipple |
| 127 | Flexible Connection 18 inch |
| 128 | P Trap |
| 129 | Providing and Fixing of 1.0 HP Solar unidirectional flow Motor of approved brand make and as per relevant IS Specifications including all fittings complete as per directions of Engineer in Charge. |
| 130 | Carriage of materials by Mechanical Tranport from source to site of work |
| 131 | Stone Aggregate 20 mm |
| 132 | Stone aggregate 40mm |
| 133 | Carriage of materials by Manual Means including loading unloading and stacking of materials |
| 134 | Stone Aggregate 20 mm |
| 135 | Stone Aggregate 40 mm |
| 136 | Dormitory |
| 137 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of Soil |
| 138 | Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete |
| 139 | Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level |
| 140 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 141 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 142 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete |
| 143 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 144 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete |
| 145 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 146 | Centering and shuttering including strutting, propping etc and removal of the same for lintels, girders, bressumers, cantilevers, beams etc complete. |
| 147 | Supply and filling of nallah GSB/ Nallah Muck of specified grade and size hand packed including ramming compacting, watering etc with all leads lifts and carriage complete. |
| 148 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in :Cement mortar 1:6( 1 cement : 6 coarse sand) |
| 149 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (Imported KD wood) |
| 150 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (imported KD wood) 35mm thick |
| 151 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 152 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (Imported Wood) 30mm thick Shutters |
| 153 | Providing & fixing 35mm thick wire gauze shutters using galvanised MS wire aperture 1.4mm wire dia 0.63mm for doors & windows and clerestory windows incld bright finished/ black enamelled M.S Butt hinges with necessary screws Imported wood |
| 154 | Providing and fixing of glass panes 5 mm thick clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured) Including Necessary beading and nails complete |
| 155 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs |
| 156 | Providing and fixing hardware items ISI marked of required colour or shade with necessary screws etc. complete for foors and windows |
| 157 | Aluminium Tower Bolts 6'' inch |
| 158 | Aluminium Tower Bolts 4'' inch |
| 159 | Aluminium Handles 4'' inch |
| 160 | Aluminium Handles 6'' inch |
| 161 | Providing and Fixing of L Drop of Standard make including Locking system complete |
| 162 | Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) including all carriage complete |
| 163 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo or more coats on new work including all carriage complete |
| 164 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 165 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 166 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 167 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 168 | Providing and laying 50 mm thick Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate)with 20mm nominal size stone aggregate. finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. |
| 169 | 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:4(1 cement:4 fine sand) |
| 170 | 12 mm cement plaster of mix 1:4 (1 Cement: 4 Fine sand) Complete. |
| 171 | 6 mm cement plaster of mix 1:3 (1 Cement: 3 Fine sand) Complete. |
| 172 | Providing and applying 2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 173 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 174 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work. |
| 175 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 176 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 177 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 178 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge 18 mm thick |
| 179 | Providing and fixing soil waste and vent pipes IS 13592 & Fittings(IS: 14735) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions,clean out plug, cowls. Offsets, collar, M.S Holder-bat clamps, access pieces, trap of self cleansing design etc complete including jointing (100 mm Dia)Type B |
| 180 | Providing and fixing of various PVC sanitary fittings |
| 181 | Door Tee 3\\" |
| 182 | Plain Tee 3\\" |
| 183 | Plain Bend 3\\" |
| 184 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, 25mm OD(SDR-7.4) 15mm dia. Nominal bore |
| 185 | Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required complete |
| 186 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 187 | Carriage of materials by Mechanical Tranport from source to site of work |
| 188 | Stone Aggregate 20 mm |
| 189 | Stone Aggregate 40 mm |
| 190 | Carriage of materials by Manual Means including loading unloading and stacking of materials |
| 191 | Stone Aggregate 20 mm |
| 192 | Stone Aggregate 40 mm |
| 193 | Electrification |
| 194 | 2 .16 kw , Single phase , OFF GRID Solar Power Plant |
| 195 | Supply, Installation, Testing & Commissioning of ALMM approved, Photovoltaic Modules ,Minimum 540 Wp Mono PERC TOPCon Solar conforming to BIS, MNRE, IEC 61215, IEC 61730 and TUV Certification\\" , minimum module efficiency not less than 21%. covered with high transmission & low Iron content tempered glass coated with anti-reflective material to obviate losses due to reflection of irradiation. PV panels will be mounted on Module mounting structure ,with tilt angle as per site conditions for optimal absorption of sunlight. |
| 196 | Supply, installation, testing and commissioning of 3 kVA single-phase off-grid solar PCU/inverter with integrated MPPT solar charge controller, suitable for 48/51.2 V LiFePO₄ battery bank based on latest power MOSFET/IGBT technology, suitable for conversion of 51.2 V DC battery supply to 220/230 V, 50 Hz single phase AC output, suitable for operation with Lithium-ion Ferro Phosphate (LiFePO₄), VRFB or equivalent compatible battery bank. The inverter shall be microprocessor controlled and provided with necessary protections against overload, short circuit, over-temperature, low battery, DC reverse polarity and output over/under voltage, with suitable LCD/LED display for essential operating parameters and fault indications. The system shall be a stand-alone/off-grid type, with solar MPPT or grid-interactive functionality, and shall include all necessary DC/AC terminals, protection devices, cooling arrangement, connectors and accessories for complete and satisfactory operation. The complete system shall be tested and commissioned at site and shall carry a minimum 5-year comprehensive warranty from the date of commissioning.. Detailed specifications are enclosed. |
| 197 | Supply of Lithium Iron Phosphate (LiFePO₄) Battery Bank, nominal voltage 51.2V DC, capacity 160 Ah, nominal energy capacity not less than 6.0 kWh, complete with integrated Battery Management System (BMS), suitable for providing a minimum 3 hours backup at a continuous peak load of 1.5 kW, considering inverter/system efficiency and permissible depth of discharge. The battery shall be suitable for the specified inverter/UPS system and shall be supplied complete with all necessary interconnecting cables, terminals, connectors and accessories. The battery shall have LiFePO₄ chemistry, with integrated BMS providing protection against over-charge, over-discharge, over-current, short circuit, over-temperature and cell imbalance. The battery shall be suitable for operation within a certified operating temperature range of at least (-)30°C to (+)50°C. The battery shall have a minimum warranty of 5 years from the date of commissioning/supply, as specified in the detailed technical specifications enclosed with the tender. Make: Exide / Amara Raja / Livguard / Okaya / Loom Solar (LiFePO₄) or equivalent approved make, subject to compliance with all stipulated technical specifications. |
| 198 | Supply, fabrication and installation of hot-dip galvanized GI/MS Module Mounting Structure (MMS) for rooftop SPV modules, designed considering minimum 540 Wp solar panels. The structure shall provide a minimum 2.4 m headroom above terrace/ground level, conform to applicable BIS/IS standards, and have zinc coating as per IS 4759. It shall be designed to withstand the specified wind and seismic loads, use corrosion-resistant and electrolytically compatible materials with suitable fasteners, and include adequate provisions for module maintenance and cleaning. |
| 199 | Providing, installing, testing and commissioning of maintenance-free chemical earthing comprising 17.2 mm dia × 2.0 m long copper bonded earth electrode (minimum 250-micron copper bonding) complete with 25 kg approved conductive backfill/earthing compound, excavation of earth pit, placement of electrode, refilling with chemical compound, watering arrangement, HDPE/GI earth pit chamber with heavy-duty cover, GI watering pipe with funnel and mesh, earth lead connection with suitable size copper/GI strip/wire using brass clamps, nuts, bolts and washers, testing of earth resistance and achieving the specified earth resistance value (preferably ≤ 1 Ohm, or as directed by the Engineer-in-Charge), including all labour, tools, consumables, transportation, excavation, backfilling and all incidental works complete in all respects as per IS 3043, relevant IEC standards and the directions of the Engineer-in-Charge. |
| 200 | SITC of CPRI Approved AC distribution panel board (DPB) . It shall have all the required components (MCBs, DPs etc) of appropriate ratings to handle system voltage, current, and fault levels, ensuring adequate protection against overcurrent, surges, and lightning , conforming to IEC 0947, part I,II,III. |
| 201 | SITC of CPRI Approved DC distribution panel board (DPB) . It shall have all components of appropriate ratings to handle system voltage, current, and fault levels, ensuring adequate protection against overcurrent, surges, and lightning , conforming to IEC 0947, part I,II,III. |
| 202 | Supply and installation of Multi strand Annealed high conductivity copper conductor, FRLS PVC insulated 1100 V rating flexible wires for D.C side in the existing PVC conduit including end termination with suitable size copper lugs : 4 sqmm multistrand copper wire |
| 203 | Supply and installation of Multi strand Annealed high conductivity copper conductor, FRLS PVC insulated 1100 V rating flexible wires for AC side in the existing PVC conduit including end termination with suitable size copper lugs : 6 sqmm multistrand copper wire |
| 204 | Supply and installation of lighting arrestor/ protection system conventional type |
| 205 | SITC of earthing strip of GI 25 * 3 mm, drawn from earth pit to the building roof top all along the length & breadth of the building. |
| 206 | Supply and fixing of Accessories like MC4 Connectors, Lugs, Communication Cable RS 485 ,Thimbles, Conduit Pipes, Earth Strip/wire, Civil Material etc. |
| 207 | Internal Electrification |
| 208 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar /Grandlay make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete, with modular switch Antibacterial series ( Legrand /ABB / Siemens make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 209 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1 nos. 3/5 pin 5/6 A modular socket outlet and 1 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 210 | Wiring for light/ power plug with 2X2.5sq. mm + 1X 2.5 sq. mm earth wire , FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge )) single core cable in surface/recessed medium class PVC conduit.including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 211 | Supplying and drawing following sizes of FRLS/HFFR ,PVC insulated copper conductor, single core cable in ,the existing surface/ recessed steel/ PVC conduit as required : 2 x 6 sq.mm Al XLPE insulated armoured feeder cable from main solar DB to other DBs including glands, lugs and termination |
| 212 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ), single core cable in surface/ recessed medium class PVC conduit as required.including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete : |
| 213 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 214 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 215 | Supplying and fixing following way, horizontal type single pole and neutral, sheet steel, MCB distribution board, 220 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(legrand / Schinider/ L&T ./ABB/equivalent standard make as directed by engineer incharge.) 8-way , Double door |
| 216 | Supply installation testing and commissioning of 9 W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 lm/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation.. |
| 217 | Providing, fixing, testing and commissioning of 9 Watt LED lamp (B22 cap), BEE/ISI approved, 230 V, cool daylight (6500 K), minimum efficacy 100 lm/W, complete with heavy-duty brass batten holder, including all fixing accessories, making electrical connections, testing and commissioning as required at site. (Havells/Wipro/Philips/Crompton/Bajaj or equivalent) |
| 218 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve/ Schinider Acti 9/ L&T ./ABB make as directed by engineer incharge. |
| 219 | a) 6-32 Amp SP MCB |
| 220 | b) 32 amp DP MCB |
| 221 | Supply, installation, testing and commissioning of exhaust fan of 150 mm sweep suitable for wall/window mounting, complete with necessary frame, mounting arrangement, louvers/shutter, and all accessories as required; the fan shall be of robust construction with high-grade engineering plastic/metal body, aerodynamically designed blades, and heavy-duty copper motor suitable for continuous operation, conforming to relevant Indian Standards and safety requirements of Havell /Bajaj/Crompton/ USHA/Orient OR OEMs/ firms holding ISO 9001 certification (Quality Management System) as directed by engineer incharge as per site requirement and necessary connections. |
| 222 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 5.1 CM/Min/Watt, air delivery 130 CM/Min (Minimum) |
| 223 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Antibacterial series ( Legrand /ABB / Siemens make.) |
| 224 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender