Tender For Upgradation Of Ayushman Arogya Mandir,Swankha Of Panchayat Swankha, Block Ramgarh Under The Head Ssy For The Year 2026-27
Tender Value
3.43 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
6860
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samba → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Ayushman Arogya Mandir,Swankha Of Panchayat Swankha, Block Ramgarh Under The Head Ssy For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated Soil as directed within a lead of 50m |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) Super str level V |
| 5 | Half Brick work with common burnt clay in :Cement mortar 1:4 ( 1 cement : 6 coarse sand) Super str level V |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platforms |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for sides of slabs etc complete |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass |
| 11 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 6 fine sand |
| 12 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 13 | Providing and laying ceramic glazed tiles laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of Tile 300x300 mm |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 15 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of Tile 600x600 mm |
| 17 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group A) |
| 18 | Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 450*300 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers of approved make (Cera, Jaguar, Hindware). |
| 19 | Providing & fixing of 32mm C.P Brass Waste Coupling for wash basin and sink, of approved quality. |
| 20 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32 mm dia |
| 21 | Providing and fixing of C.P Grating of required size (100mm) |
| 22 | Providing and fixing C.P. brass bib cock of approved quality (Cera, jaguar, Hindware) conforming to IS : 8931 15 mm nominal bore |
| 23 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make (Cera, Jaguar, Hindware) conforming to IS : 8931 15 mm nominal bore |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: Note:-(all Items to be paid as per actual used on site) 20mm NOMINAL DIA PIPES |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: Note:-(all Items to be paid as per actual used on site) 15mm NOMINAL DIA PIPES |
| 26 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: Note:-(all Items to be paid as per actual used on site) Union 20mm |
| 27 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: Note:-(all Items to be paid as per actual used on site) Tank Nipple 20mm |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: Note:-(all Items to be paid as per actual used on site) pvc floor trap |
| 29 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall: Note:-(all Items to be paid as per actual used on site) Providing and fixing ball valve (brass) of approved quality |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 31 | Providing and Fixing 1 mm thick M.S.Sheet door with frame of 40x40x6mm angel iron and M.S gusset plates at the junction and corners.all necessary fitting,including applying a primer coat of approved coat steel primer. |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 33 | Painting steel work with synthetic enamel paint ( new work) |
| 34 | sand and aggregates at avg distance of 10 kms |
| 35 | bricks for lead of 5 kms( 504/1000) |
| 36 | Add Cost Of CIB Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender