Tender For Repair/Maint Of Rusted Ci/Gi Pipe Line, Valves, Valve Pit & Allied Works And Repair/Maint To Drain, Manholes, Cleaning Of Septic Tank, Sockage Well, Sewage Line And Footpath, Fencing, Boundary Wall, Hardstanding Etc At Muzaffarpur Military
Tender Value
43 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
15 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Rusted Ci/Gi Pipe Line, Valves, Valve Pit & Allied Works And Repair/Maint To Drain, Manholes, Cleaning Of Septic Tank, Sockage Well, Sewage Line And Footpath, Fencing, Boundary Wall, Hardstanding Etc At Muzaffarpur Military Station Under Ge Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying/ taking out of pipe in soft/loose soil, complete all as specified and directed. |
| 2 | Returning/ refilling in trenches including spreading levelling, watering and well ramming in layer not exceeding 25 cm thick, complete all as specified and directed. |
| 3 | Removal of excavated surplus soil not exceeding 50 meter and depositing where directed at level not exceeding 1.5 metre above the starting point, complete all as specified and directed. |
| 4 | Material and labour for cutting existing CI//DI/MS water mains in position for insertion of tee, branch line etc to new water connection of size 150 mm bore complete all as specified and directed. |
| 5 | Same as item No 4 above but of size 100 mm bore complete all as specified and directed. |
| 6 | Taking up CI//DI water mains including all fittings with spigot and socket ends and lead joint including burning out lead joint and recovering lead of CI pipe of size 100 mm dia bore complete all as specified and directed. |
| 7 | Same as item No 6 above but of size 150 mm bore complete all as specified and directed. |
| 8 | Refixing of CI//DI pipes with socket and spigot end in trenches with necessary fittings in any length including cleaning of size 100 mm dia bore complete all as specified and directed (Excavation and earth work will be measured & paid separately) |
| 9 | Same as item No 8 above but of size 150 mm bore complete all as specified and directed. |
| 10 | Supply, laying and jointing of DI pressure pipes with spigot and socket lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and mettalic zinc/epoxy coating on outer side, suitable for push on joint (rubber gasket joint) including rubber gasket, in any length laid in trenches/ over masonry pillar and connection to old or new position of Class \\"K-7\\" of size 100 mm bore complete all as specified and directed |
| 11 | Same as item No 10 above but of size 150 mm bore complete all as specified and directed. |
| 12 | Material and labour for run lead joints of CI pipes of size 100 mm dia bore complete all as specified and directed. (Excavation and earth work will be measured & paid separately) |
| 13 | Same as item No 12 above but of size 150 mm dia bore complete all as specified and directed. |
| 14 | Materail and labour in repair for Rubber gasket joint of size 100 mm dia bore complete all as specified and directed. (Excavation and earth work will be measured & paid separately) |
| 15 | Same as item No 14 above but of size 150 mm dia bore complete all as specified and directed. |
| 16 | Supply and fixing cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size & Nos, of size 80 mm dia including taking down old unserviceable CI sluice valve complete all as specified and directed. |
| 17 | Same as item No 16 above but of size 100 mm dia bore complete all as specified and directed. |
| 18 | Same as item No 16 above but of size 150 mm dia bore complete all as specified and directed. |
| 19 | Same as item No 16 above but of size 200 mm dia bore complete all as specified and directed. |
| 20 | Supply and fix CI reflux ( non return ) valve 80 mm bore as per IS 5312 with GM working parts both ends flanged and suitably machined and drilled for and including required nut , bolts washer rubber/ fiber packing complete all as specified and directed. |
| 21 | Supply and fix CI reflux ( non return ) valve 100 mm bore as per IS 5312 with GM working parts both ends flanged and suitabely machined and drilled for and including required nut , bolts washer rubber/ fiber packing complete all as specified and directed. |
| 22 | M&L for Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm complete all as specified and directed. |
| 23 | M&L for Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth upto 150mm complete all as specified and directed. |
| 24 | Taking up or down (from wall/trenches/floor) existing GI steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore complete all as specified and directed. |
| 25 | Same as item No 24 above but of size 20 mm dia bore complete all as specified and directed. |
| 26 | Same as item No 24 above but of size 25 mm dia bore complete all as specified and directed. |
| 27 | Same as item No 24 above but of size 40 mm dia bore complete all as specified and directed. |
| 28 | Same as item No 24 above but of size 50 mm dia bore complete all as specified and directed. |
| 29 | Refixing only GI steel tubing and connections in new or old position including cleaning internally and externally, any grade / make in trenches / wall / floor / ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of 15 mm bore complete all as specified and directed. |
| 30 | Same as item No 29 above but of size 20 mm dia bore. |
| 31 | Same as item No 29 above but of size 25 mm dia bore complete. |
| 32 | Same as item No 29 above but of size 40 mm dia bore. |
| 33 | Same as item No 29 above but of size 50 mm dia bore. |
| 34 | Supply, laying & fixing GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of 15 mm bore complete all as specified and directed. |
| 35 | Same as item No 34 above but of size 20 mm dia bore. |
| 36 | Same as item No 34 above but of size 25 mm dia bore. |
| 37 | Same as item No 34 above but of size 40 mm dia bore. |
| 38 | Same as item No 34 above but of size 50 mm dia bore. |
| 39 | Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends with union, long screw with check nut for iron pipe including taking down existing old unsv gate valve of size 15 mm dia bore complete all as specified and directed. |
| 40 | Same as item No 39 above but of size 20 mm dia bore. |
| 41 | Same as item No 39 above but of size 25 mm dia bore. |
| 42 | Same as item No 39 above but of size 40 mm dia bore. |
| 43 | Same as item No 39 above but of size 50 mm dia bore. |
| 44 | Material and Labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for construction of thrust blocks to the pipe at corners and bends etc complete all as specified and directed. |
| 45 | M&L for float valve high pressure with polythene float and flynut complete, screwed for iron pipe or PVC ferrule and fixed of 15mm bore complete all as specified and directed. |
| 46 | Same as item No 45 above but of size 20 mm dia bore. |
| 47 | S & F chromium plated fancy type bib taps,cast copper alloy with crutch or butterfly handel,screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore dia of pipe complete all as specified and directed. |
| 48 | Material and labour for drilling and tapping cast iron water mains in position for branch connections of 15 mm to 20 mm internal dia size complete all as specified and directed. |
| 49 | Supply of industrial grade Calcium Hypochlorite Granules with minimum 65% available chlorine content, in dry granular form, suitable for water disinfection.The chemical shall comply with relevant standards (IS 1168 or equivalent), with low moisture content (<1%) and high chlorine availability, complete all as specified and directed. |
| 50 | Supply of Bleaching Powder (Ca(OCl)₂) in powder form, suitable for water disinfection and treatment of potable water, swimming pools, and wastewater treatment systems, Aavailable Chlorine Content Minimum 33–35%, complete all as specified and directed. |
| 51 | Supply and replacing the existing old/damaged water quality testing kit from pump housel and supplying new portable digital water quality testing kit suitable for testing free chlorine, pH value, total alkalinity and residual disinfectant, complete with reagent solution/tablets, calibration solution, test vials, carrying case, instruction manual and all necessary accessories complete all as specified and directed. |
| 52 | Carry out physico-chemical, biological testing of water of bore well at different pump house i.e PH-1, PH-2 from Govt Lab/Govt Authorised Laboratory all directed and submitting the report to Eng-in-charge complete all as specified and directed. Rates quoted should be for one sample. |
| 53 | Cleaning of OHT having height upto 18 mtr & capacity 20000 gallons by removing deposited sand,mud,silt and taking out from the tank ,Flushing out the mud water by scraping out deposited mud on surfaces inside by using steel brush complete all as specified and directed & Putting adequate quantites of lime mixed water and removing the same through wash out followed by poring bleaching solution all around the bottom of the tank and marking the date of cleaning with synthetic enamel paint on external surface including two coats of synthetic enamel paint on all pipes of different sizes such as rising main, delivery pipe, over flow pipe & wash out pipe etc. as per colour code complete all as specified and directed at site. |
| 54 | M & L for cutting of grass at EM installations and surrounding areas etc complete or when and where directed and removing the same from the site to a distance not exceding 50 mtr and spreading of bleaching powder at the rate of 1kg/10 Sqm for stop the abnormal growth of grass all as specified and directed. |
| 55 | Material & Skilled labours for attending of day to day complaints of E/M nature (water supply/Elect supply) for repair/ replacement of minor accessories like union/tee/socket/ elbow/M-seal etc which are deemed to be included in this job and will not be paid separately including testing complete all as directed. Note :- (a) Contractor should have to receive complaints trough day to day basic from MES complaint cell.(b) Major Spare parts will be measured and paid separatly under respective items of this BoQ.(c) Reqd tools, laddar etc will be provided by the contractor.(d) Sefety precaution will be responsibility of the contractor. |
| 56 | S&F 3 core x 16 Sqmm Copper Flat Submersible Cable (ISI marked, PVC insulated, Suitable upto 1100V complete all as specified and directed. Make: Polycab/Havells/Gloster/Finolex/KEI |
| 57 | S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 80 Amps with breaking capacity 25 KA adjustable, theremal magnetic release type all as specified and directed. Make: Legrand/Havells/ABB/L&T |
| 58 | S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,100 Amps with breaking capacity 25 KA fixed, theremal magnetic release type, all as specified and directed. Make: Legrand/Havells/ABB/L&T |
| 59 | S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,125 Amps with breaking capacity 25 KA fixed, theremal magnetic release type all as specified and directed. Make: Legrand/Havells/ABB/L&T |
| 60 | S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 200 Amps with breaking capacity 25 KA fixed, theremal magnetic release type all as specified and directed. Make: Legrand/Havells/ABB/L&T |
| 61 | M&L for flushing and cleaning of existing borewell by high-pressure air compressor method including all labour, tools, tackles, compressor,hose pipes, removal of silt/sludge and testing complete all as specified and directed at site. |
| 62 | M&L for cleaning of WCs and cleaning of sewage line from gully trap to 1st manholes day to day basis as per complaint slip on working day only by manually [By providing a gang of 2 personnels (un skilled) including all necessary T&P] complete all as specified and directed.Note- The attendance of labour shall be recorded in register daily and signed by contractor, JE (Civ) & Engineer In Charge for record of measurement. |
| 63 | Desludging of septic tank including sludge pits etc manually for cleaning them throughly and removing muddy soils/sludge to a distance not exc 500mtr and buried it in pits or otherwise disposed off out side defence land including dewatering of efflorescents from septic tank, soak well etc by means of 7.5 HP non clogging diesel driven pump with necessary disel, T&P etc in nearest drain complete as directed for the following sizes :- |
| 64 | 10 - 25 users septic tank |
| 65 | 50 users septic tank |
| 66 | 100 users septic tank |
| 67 | 150 users septic tank |
| 68 | Same as item No 63 above but man holes of any depth and any size. |
| 69 | Cleaning of sewage line and connected manholes (any length) from manhole to manhole, manhole to septic tank septic tank to soakwell (n. exc 50 mtr) by using bamboo sticks or MS rods and revolving with rope and well flushing after cleaning and removing mud / sludge etc and burried it in pits and disposed off the same outside defence area complete all as specified for 150 mm bore of pipes and 200 mm bore pipes. |
| 70 | Dewatering of efflorescents from septic tank / soak well etc of any capacity by means of 7.5 HP non clogging diesel driven pump with necessary disel, T&P etc in nearest drain complete all as specified and directed.Note : Date and time of the dewatering shall be entered in register and signed by contractor, JE (Civil) and Engineer in charge for record of measurements. |
| 71 | M&L for cleaning of sludge of any type from drain and clear to flow of water as directed including removing the excavated sludge n.exc. 50 m and depositing where directed at a level to a distance n.exc. 1.5 m above the starting points complete all as specified and directed. |
| 72 | Cutting out any type of vegetation complete from root grouted inside the wall specially in contact with sanitary pipe and pouring/grounting with hydrochloric acid (HCL) on left out roots if any including making good surfaces to match adjacent surfaces in PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) or 15mm thick plaster in CM (1:4) area exc. 0.5 but n.exc. 1.0 Sqm each complete all as specified and directed. |
| 73 | Cleaning and removing all scale and dirt, etc. from PVC water tanks of capacity exc 250 ltrs and not exc 500 ltrs capacity and from mouths of circulating pipes, etc. complete all as directed at site. |
| 74 | S&F in repair 110 mm bore PVC (SWR) bends any radius including taking out existing complete all as specified and directed. |
| 75 | S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 76 | S&F in repair 110 mm bore PVC (SWR) branch piece , single equal or unequal complete all as spd and directed. |
| 77 | S&F in repair 75 mm bore PVC (SWR) branch piece , single equal or unequal complete all as spd and directed. |
| 78 | S&F in repair 110 mm bore PVC (SWR) junctions, single (SingleT) equal or unequal complete all as spd and directed. |
| 79 | S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as spd and directed. |
| 80 | S&F in repair 75 mm bore PVC (SWR) vent cowl complete all as spd and directed. |
| 81 | S&F in repair 110 mm bore PVC (SWR) 'P' trap complete all as spd and directed. |
| 82 | S&F in repair 110 mm bore PVC (SWR) 'S' traps complete all as spd and directed. |
| 83 | M&L in repair 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 84 | S&F in repairs 75mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. Note : earth work will be measured & paid separately |
| 85 | S&F in repairs 110mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. Note : earth work will be measured & paid separately |
| 86 | S&F in repairs 110mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, fixed to walls all as specified and directed. |
| 87 | S&F in repairs 75mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, fixed to walls all as specified and directed. |
| 88 | Demolition of reinforcement cement concrete of any description and in any psition not otherwise specifically provided for as directed at site. |
| 89 | M&L precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in man hole cover slabs and set in CM (1:4) after demolition of existing man hole cover complete. |
| 90 | M&L mild steel TMT bars 10 to 12mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 91 | Same as item No 85 above but 6mm to 8mm |
| 92 | Demolition of plain cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level). |
| 93 | M&L for Plain Cement Concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) 100 mm thick in floors complete all as specified and directed. |
| 94 | Demolition of brick work built in cement mortor including all quions arches pillar etc. but excluding concrete arches. |
| 95 | M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 96 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 97 | Demoletion and breaking up drain pipe of 150mm bore (salt glazed stoneware , AC or reinforced concrete ) set in cement mortar complete all as specified and directed. |
| 98 | Demoletion and breaking up drain pipe of 200mm bore (salt glazed stoneware , AC or reinforced concrete ) set in cement mortar complete all as specified and directed. |
| 99 | M&L for cement concrete bed to drain pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipe 150 mm dia after they are laid and tested complete all as specified and directed. |
| 100 | M&L for cement concrete bed to drain pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipe 200 mm dia after they are laid and tested complete all as specified and directed. |
| 101 | M&L for 150 mm bore salt glazed stoneware (SGSW) drain pipes grade 'A' laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed. |
| 102 | M&L for 200 mm bore salt glazed stoneware (SGSW) drain pipes grade 'A' laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed. |
| 103 | M&L for providing plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone agregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 104 | M&L for providing cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping, water toughs including weathering, slighting rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 105 | M&L for Plain Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 106 | Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete. |
| 107 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note : Liquid WPC will be measured and paid separately. |
| 108 | Supply only integral water proofing compound (Liquid) ISI marked. |
| 109 | M&L for two coat of cement base paint over a coat of primer on wall including preparation of newly plastered surfaces complete all as specified and directed. |
| 110 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. |
| 111 | S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of waste fitting and 32mm dia waste pipe etc complete all as specified and directed. |
| 112 | S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges inluding brackets complete all as specified and directed. |
| 113 | S&F in repair 450mm long PVC connection of size 15mm with PTMT nuts etc complete all as specified and directed. |
| 114 | S & F looking mirror 600 x 450 mm selected quality 5 mm thick mounted on 6 mm ply wood with fancy type PVC frame work and fixed with brass screw and cup washer complete all as specified and directed. |
| 115 | S&F in repair Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) complete all as specified and directed. |
| 116 | S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified and directed. |
| 117 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 118 | S&F in repair wash hand basin waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin complete all as specified and directed. |
| 119 | S&F in repair sink waste coupling of chromium plated brass 40 mm dia with long screwed shank and fly nuts complete all as specified and directed. |
| 120 | S&F in repairs CP Fancy type shower rose 200mm x 200mm square with long CP arm of approved quality complete all as specified. |
| 121 | S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed. |
| 122 | S & F rotational moulded polyethylene water storage tank of capacity 500 litrs capacity (Cylindrical vertical with closed top) hoisted and fixed on position complete all as specified and directed. |
| 123 | S & F PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed. |
| 124 | M&L in repair 75 mm dia of cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed. |
| 125 | S&F in repair vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest incl connection to trap, and to flush pipe, anti-syphonage etc including making good to floor complete all as specified and directed. |
| 126 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including sheet cover of white colour complete all as specified and directed. |
| 127 | M&l Vitreous china urinal half stall type , white with grating and union for discharge pipe including providing and fixing plug , bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement , fixing automatic flushing cistern with brackets , flush pipe, waste pipe , (exclusive of fixing supply pipe to flushing cistern , trap and waste pipe) complete all as specified and directed. |
| 128 | M&L for CP Urinal spreader for fixing with 15mm bore pipe complete all as specified . |
| 129 | M&L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete all as specified and directed. |
| 130 | M&L for brick work with old size sub class 'B' bricks, laid flat in floors laid dry complete all as specified and directed. |
| 131 | M&L for 100 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), in sub base complete all as specified and directed. |
| 132 | M&L for 55 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate), as in flooring complete all as specified and directed. |
| 133 | M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 134 | Dismantling of floor hearth wall tiling including cement mortar bedding complete all as specified and directed. |
| 135 | M&L for non skid coloured ceramic tiles, area of each tile exceeding 0.11 Sqm but not Exc 0.18 Sqm in floors etc over and including 15mm thick screed bed in CM 1:6, set & jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 136 | M&L coloured ceramic glazed tiles 300x200x7mm thick as in dado/skirting etc incl 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed with white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 137 | M&L For Chequred cement concrete tiles (pre painted coloured rubber moulded ) 30cmX30cmX25 mm thick set jointed and pointed with grey cement slurry mixed with pigment to match the shade over and inclusive of 20mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 138 | S& F MS post and strut in fencing including cutting top to shape as directed ,driling holes ,noatching for wire etc ,flat iron filet (for securing wire mess etc) including all necessary drilling holes notching or riveting erc,and similar work conforning to Fe-410 or FE-310 complete all as specified and directed. |
| 139 | S&F chain link fencing in 4mm dia galvansied steel wire n.exc 4 kg per sqm, mesh size 100 x 100 mm diagonal shape, made up, including link line wire, in fencing including straining and fixing to wood, concrete or steel posts and or to straining bolts, including securing with and provision of gavanised iron tying wire gavanised iron staples or steel pins etc complete all as specified and directed. |
| 140 | S&F for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standed rails straining bolts including securing or tying at crossing with and provision of ganvanised MS wire stapples or steel pins etc as directed (each line wire to be measured) |
| 141 | M&L two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of steel surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender