Tender For Supply Installation Testing and Commissioning of Power Supply Panel And Ug Cable For Various Toilet Blocks Under Stc Bsf Hazaribag.
Tender Value
5.99 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hazaribagh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Power Supply Panel And Ug Cable For Various Toilet Blocks Under Stc Bsf Hazaribag.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.).) (i) 4 way (4 + 12), Double door |
| 2 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i) Single pole |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 4 | (i)3½ X 35 sq. mm (32mm) |
| 5 | (ii) 3½ X 120 sq. mm (45mm) |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required |
| 7 | (i)90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 8 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 9 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 10 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 2 x 35 sq.mm. direct in ground including excavation and refilling the trench but excluding sand cushioning & protective covering.Make-Havells/L&T/Polycab/KEI. |
| 11 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 2X35 sq.mm. in the existing masonry/ open duct as required.Make-Havells/L&T/Polycab/KEI. |
| 12 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 2X35 sq.mm. in the existing RCC/ HUME/ METAL pipe as required. Make-Havells/L&T/Polycab/ KEI. |
| 13 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 3.5 x 35 sq.mm. direct in ground including excavation and refilling the trench but excluding sand cushioning & protective covering.Make-Havells/L&T/Polycab/KEI. |
| 14 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 3.5X35 sq.mm. in the existing masonry/ open duct as required.Make-Havells/L&T/Polycab/KEI. |
| 15 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 3.5X35 sq.mm. in the existing RCC/ HUME/ METAL pipe as required. Make-Havells/L&T/Polycab/ KEI. |
| 16 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 3.5X120 sq.mm. in the existing masonry/ open duct as required.Make-Havells/L&T/Polycab/KEI. |
| 17 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade as per IS 7098 (Part 1) 1988, armoured UG electric cable with aluminium conductor of size 3.5X120 sq.mm. in the existing RCC/ HUME/ METAL pipe as required. Make-Havells/L&T/Polycab/ KEI. |
| 18 | Providing, laying and fixing of 40 mm dia GI pipe (medium class) for laying of U.G Cable under the road with cutting, weilding of GI pipe etc as required (Make-Jindal,Tata,ISI marked). |
| 19 | S/ITC of outdoor type power supply panel, double door made out of 16 SWG CRCA sheet of size 1000 mm x 1200 mm x 300 mm deep having 200 amps, 04 nos insulated aluminium bus bars including Angle iron frame of size 1200mm x 300 mm with 600 mm long,4 legs made out 40mmX40mmX5mm and grouting the same with cement foundation and to accommodate following accessories, double door openable on front&back side and P & F of internal connection with spreader terminals and other accessories with suitable size of copper wires etc. as required.The indoor type power supply panel having arrangement for incoming / outgoing cabling / cable termination, earthing, locking, interconnection etc. as required.(i)4 pole, 200 amps, 25 kA, 415 Volts, 50 Hz MCCB Model No.-CM90642OONO with spreader terminal & Rotary Handle of L&T or equivalent make of ABB/Schneider/Siemens-01 Nos. (ii)4 pole, 100 amps, 25 kA, 415 Volts, 50 Hz MCCB Model No.-CM91712OOKOOG with spreader terminal & Rotary Handle of L&T or equivalent make of ABB/Schneider/Siemens-01 Nos. (iii)4 pole, 63 amps, 25 kA, 415 Volts, 50 Hz MCCB Model No.-CM91712OOHOOG with spreader terminal & Rotary Handle of L&T or equivalent make of ABB/Schneider/Siemens-02 Nos.(iv)4 pole, 200 amps, 415 Volts, 50 Hz on load changeover switch Model No.-CO22000OOOA with spreader terminal & Rotary Handle of L&T or equivalent make of ABB/Schneider/Siemens-01 Nos. (v)4 pole, 63 amps, 415 Volts, 50 Hz MCB Model No.-BB40630C of L&T or equivalent make of ABB/Schneider/Siemens-02 Nos. (vi) Indicating lamps - 06 Nos (3 Nos for Incoming and 03 Nos for O/G) |
| 20 | SITC of 100 A, 415V, 4-pole , 25 kA MCCB, model-CM91712OOKOOG of L&T in the existing mcb db with nut bolt, washer compltete etc as required or equivalent make of Simens/Schneider/ABB. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender