Tender For Repair/Maint Of Various Pumps With Allied Water Supply Pipe Line At Aec Trg College And Centre Pachmarhi
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
4 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Various Pumps With Allied Water Supply Pipe Line At Aec Trg College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Excavation for taking out/laying cable/pipe in trenches in soft/loose soil not exc 1.5 m wide and not exceding 1.5 m deep complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning filling in including spreading, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removing surplus soil to distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 4 | Supply & fixing gun metal Non Return Valve 50mm suitable for GI pipe line complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply & fixing Cast Iron Non Return Valve 65mm suitable for GI pipe line complete all as specified and directed. |
| 6 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to stor of 80mm bore, complete all as specified and directed by Engineer-in-charge. |
| 7 | Description all as per item No 6.00 but 50mm bore |
| 8 | Description all as per item No 6.00 but 40mm bore |
| 9 | Description all as per item No 6.00 but 25mm bore |
| 10 | Description all as per item No 6.00 but 20mm bore |
| 11 | Supply, fixing / laying, jointing and testing of GI pipes, medium grade, ISI marked with all fittings fixed on wall/ roof or laid in trenches/ floors for the size 80mm bore, complete all as specified and directed by Engineer-in-charge. |
| 12 | Description all as per item No 11.00 but 50mm bore |
| 13 | Description all as per item No 11.00 but 40mm bore |
| 14 | Description all as per item No 11.00 but 25mm bore |
| 15 | Description all as per item No 11.00 but 20mm bore |
| 16 | M&L for taking out old unserviciable burnt winding of centrifugal motor, 3 phase, 415 volts, 50 Hz, AC supply after disconnecting all electrical connections and rewinding by using super enamelled copper conductor of existing gauge and size by maintaining existing turn ratio, applying insulation varnish and drying up to specified period to achieve desired insulation value including reassembling of motor after rewinding and testing before reinstalation and including all electrical connection using suitable size of lugs of 7.5 HP capacity, complete all as specified and directed by Engineer-in-charge. |
| 17 | Description all as per item No 16.00 but 15 HP capacity |
| 18 | Description all as per item No 16.00 but 30 HP capacity |
| 19 | M&L for transporting Submersible/ Centrifugal Pump Set any capacity from Pump House/ E&M store yard at Pachmarhi to Pipariya and back (nearest workshop) for repairing including carefully loading/ unloading etc complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for lifting out/ taking up carefully submersible Pump Set and motor by deploying skilled labour from bore well after disconnecting electrical and pipe line conections, with the help of chain pully block with tripod including column pipe and submersible cable from 220 feet approx depth, disconnecting pump and motor from coupling and keeping aside for testing / checking submersible pump set and other connected acessories for servicibility complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for dismantling of motor, checking rotar, stator, thrust bearing and other parts for its serviceability complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for taking out old unserviciable burnt winding of submersble motor 7.5/10 / 15 HP, 3 phase 415 volts, 2900 RPM, 50 Hz AC supply and rewinding by using copper super enamelled conductor PVC insulated of existing gauge and size by maintaining existing turn ratio and reassembling of submersible motor after rewinding by replacing following burn out parts complete all as specified and directed by Engineer-in-Charge.Note : Spares required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'. |
| 23 | Supply only Thrust bearing (submersible motor spares/ parts) As per existing make / type and size, complete all as specified and directed by Engineer-in-charge. |
| 24 | Supply only Sand guard (submersible motor spares/ parts) As per existing make / type and size, complete all as specified and directed by Engineer-in-charge. |
| 25 | Supply only Coupling assy made out of stainless steel with key (submersible motor spares/ parts) As per existing make / type and size, complete all as specified and directed by Engineer-in-charge. |
| 26 | M&L for dismantling of pump, checking impeller, distance sleeves, bush and other parts for its serviceability complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L for reassembling of submersible pump after repairing and by replacing burnt out parts complete all as specified and directed by Engineer-in-Charge.Note : Spares required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'. |
| 28 | Supply only Housing bush brass (submersible pump spares/ parts) As per existing make / type and size, complete all as specified and as directed by Engineer-in-charge. |
| 29 | Supply only Stage bush (submersible pump spares/ parts) As per existing make / type and size, complete all as specified and as directed by Engineer-in-charge. |
| 30 | Supply only Distances sleaves (submersible pump spares/ parts) As per existing make / type and size, complete all as specified and as directed by Engineer-in-charge. |
| 31 | Supply only Impeller (submersible pump spares/ parts) As per existing make / type and size, complete all as specified and as directed by Engineer-in-charge. |
| 32 | M&L for assembling pump and motor after repairing and testing at workshop by technician complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for lowering down, submersible Pump Set and motor by deploying skilled labour inside bore well, with the help of chain pully block with tripod including column pipe and submersible cable up to approx depth 220', after connecting pump and motor with coupling, and making electrcal and pipe line connections etc complete all as specified and directed by Engineer-in-Charge.Note : Materials required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'. |
| 34 | S&F in repair Submersible cable, PVC insulated, multistranded copper conductor, 1100 volts grade, 3 core flate of size 6 Sqmm, complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repair Automatic star delta starter in sheet metal enclosure, suitable for submersible/ centrifugal pump set with relay, contactor, auxilary contactor suitable for capacity upto 7.5 HP to run on 440 volts, 50 Hz, AC supply complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repair Automatic star delta starter in sheet metal enclosure, suitable for submersible / centrifugal pump set with relay, contactor, auxilary contactor suitable or capacity above 7.5 HP and upto 15 HP to run on 440 volts, 50 Hz, AC supply complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair Automatic star delta starter in sheet metal enclosure, suitable for submersible / centrifugal pump set with relay, contactor, auxilary contactor suitable or capacity above 15 HP and upto 30 HP to run on 440 volts, 50 Hz, AC supply complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repair Gun metal globe or gate valve with iron wheel head, ISI marked screwed both ends for iron pipes and fixed including taking down the old one of size 50mm bore, complete all as specified and directed by Engineer-in-charge. |
| 39 | Description all as per item No 38.00 but 40mm bore |
| 40 | Description all as per item No 38.00 but 25mm bore |
| 41 | Description all as per item No 38.00 but 20mm bore |
| 42 | M & L Cast iron foot valve of size 150 mm suitable for fixing in 150 mm GI pipe suction line in UG sump complete all as specified and directed by Engineer-in-Charge. |
| 43 | M & L Cast iron foot valve of size 100 mm suitable for fixing in 100 mm GI pipe suction line in UG sump complete all as specified and directed by Engineer-in-Charge. |
| 44 | M & L Cast iron foot valve of size 50 mm suitable for fixing in 50 mm GI pipe suction line in UG sump complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F 65 mm dia GI coloumn pipe heavy duty ISI marked in standard length dully threaded both ends with including long threaded heavy duty socket complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty, armoured, with multistranded aluminium conductors, laid in trenches/ducts/fixed on poles etc of sizes 35 Sqmm, 3.5 core cable including all electrical connections using suitable size of gland and lungs including taking out the old one complete all as specified and directed by Engineer-in-Charge.Note :- Excavation, earth work, sand cushioning, protection cover and pipe shall be measured and paid for separately under respective items of this schedule. |
| 47 | Supply and fixing rope with dia of 14-16 mm, for securing submerssible pump set, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Material and labour for narmada river sand, unwashed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and laying of sub class B bricks old size laid flat adjacent to each other perpendicular to the direction of U/G cable complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for MCCB 4 Pole 25 to 100 Amps, 16 KA complete in vertical type DB including making connections etc, complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply and fix in repairWater meter to measure water flow at borewell and suitable for installed at pipeline of dia 50 mm to 100 mm complete all as specified and directed by Engr-in-charge. |
| 52 | M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 25X4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel . supplying and laying charcoal stone aggregate) chamber and RCC cover of size 54x54x50 mm (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in drawing including taking out the old one, complete all as specified and directed by Engineer-in-Charge. Note - Cost of GI strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items. |
| 53 | Repair/replacement of dozzing system as per existing make and model and capacity with change of connected pipes and related items and testing at various pump houses and make it functional complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repair display sign board of size 3 feet x 2 feet with writing letters (as required) on board and made by 3 mm thick ACP sheet with lumination on one side Retro venyl on MS pipe Frame of 25mm x 25 mm, MS pipe of 50mm x 50mm square post of height 6 feet from GL and fixed with PCC 1:2:4 type B-2 in ground upto 60 cm depth including necessary earthwork as directed by Engr-in-charge, complete all as specified and directed by Engineer-in-Charge. |
| 55 | S & F UPVC column pipe with 65 mm nominal dia, heavy duty suitable for pressure 26 KG/CM^2 and wall thickness not less than 7.62 mm with chain pulley with pipe joint system with coupler and wirelock for extra pump safety and including coupler on one side complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender