Tender For Maintenance Of Residential And Office Accn Of Dpdo/Lao/Zo/Pd And Maintenance Of Badminton Court Of Dad In Aor Of Age Br-I Under Ge(West)Pathankot
Tender Value
17.69 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
21 days left
EMD
35380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Residential And Office Accn Of Dpdo/Lao/Zo/Pd And Maintenance Of Badminton Court Of Dad In Aor Of Age Br-I Under Ge(West)Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I B/R Work:-Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed by Engr-in-Charge. |
| 4 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and directed by Engr-in-Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 6 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 7 | Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 8 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75MM/110mm complete all as complete all as specified and directed by Engr-in-Charge. |
| 10 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area exc1.5 Sqm but n. exc 4 Sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 12 | Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed. |
| 13 | Taking down shutters of any description n exc. 1 sqm each, complete all as specified & directed. |
| 14 | Hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4. including dismantling of existing floor tile and disposal of rubbish complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 16 | M&L for joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in vertical surface such as skirtings, dados and risers to step, etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick cement plastere in CM 1:4 including dismantling of existing floor tile and disposal of rubbish complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 17 | S&F joint free Light Shed Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:4. including dismantling of existing floor tile and disposal of rubbish complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 18 | S&F joint free Light Shed Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirtings, dados and risers to step etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plastere in CM 1:4 including dismantling of existing floor tile and disposal of rubbish complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 19 | M&L for coloured Glazed ceramic tiles in vertical surface such as wall,dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:3 including dismantling of existing floor tile and disposal of rubbish complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 20 | M&L for non abrasive paving tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match and including dismantling of existing floor tile and disposal of rubbish complete all as specified and directed by Engr-in-Charge..Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles and Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.& Brushing neat cement slurry with 3.0kg of cement per sqmetre |
| 21 | M&L for 16-18 mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 20mm thick screed bed or bedding layer in cement mortar 1:4 etc and also including dismantling of existing floor stone slab/ tiles of any discription or thickness and disposal of rubbish complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for Cement concrete 1:4:8, type D-2 (using 12.5 mm graded crushed stone aggregate) as in mass concrete,sub base, sub floor etc complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for RCC M-20(Nominal mix) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and directed by Engr-in-Charge. Note:- Reinforcement shall be measured and paid separately). |
| 25 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, in cover slabs( for manholes etc.)chulla hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. (Reinforcement shall be measured and paid separately). |
| 28 | M&L for Brickwork with sub class 'B' brick old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for except brick of any description in CM 1:6. complete all as specified. |
| 30 | M&L for Brickwork with sub class 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cm 1:4 mixed with liquid water proofing compound finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 32 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces of wall in cm 1:6 finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 33 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) as on ceiling complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 34 | M&L for Providing and applying Birla/Altek wall care putty of 1-2 mm thickness (as required surface) over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 35 | M&L for preparation of newly plastered internally surfaces of wall and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 36 | M&L for Preparing newly plaster surfaces of wall & applying two coats of cement base paint over a priming plastered and other surfaces with alkali-resistance Primer without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. |
| 37 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 38 | M&L for preparation of Old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 39 | M&L for preparation of old plastered internally surfaces of wall one coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 40 | M&L for preparation of old plstered surface and apply one coat of acrylic water based exterior grade emulsion @ 0.9 ltr ( undiluted)/10sqms dilluted with water in 1:1 ratio finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. Note :- All scaffolding work is including in this Item upto 4 Story in bldg. |
| 41 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 43 | Fixing only 15mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) |
| 44 | S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 45 | Fixing only 20mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) |
| 46 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including inlet & outlet tank nipple 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including inlet & outlet tank nipple 20 mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and directed by Engr-in-Charge. |
| 51 | Cleaning and Removing all scale and dirt, etc from over head water tanks and from mouth of circulating pipes of Capacity exc 500 litters but n. exc. 1000 liters Complete all as specified and directed. |
| 52 | S&F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F in repair 5mm thick looking mirror of any size of selected quality glass mounted on 6mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed on wall PVC plug and screws etc complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern ) including flush pipe of polythylene of low or high density or PVC 32 mm dia, for low levwl cistern including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. including flush pipe of polythylene of low or high density or PVC 32 mm dia, for low levwl cistern complete including making good to floor complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repairs for Viterous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair Stainless Steel Soap Dish or Soap Holder Dish for Bathroom with fixing arrangement complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand including waste coupling of 32/40mm bore and waste pipe complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repairs of brass chromium plated health faucet with 1m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm including waste coupling of 32/40mm size complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.(ISI MARKED) |
| 71 | S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed by Engr-in-Charge..(ISI MARKED) |
| 72 | S&F in repairs 100 mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F Grating doom 125/100 mm dia with/without waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F pressed steel frames 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS-2202 (part-1-1999), ISI marked complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge. Note: wire cloth shall be measured separately |
| 78 | S&F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed. |
| 79 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F in repair 3 mm thick sheet glass ordinary/frosted quality and glazing clip/oil putty/beading in square n exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F in repair 4mm thick ordinary/frosted glass, pin head type and glazing clip/oil putty/beading in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed by Engr-in-Charge. |
| 84 | Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 85 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F Anodised aluminium frame with Powder Coating (minimum thicknessof powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 87 | S&F Anodised aluminium door shutters/window/ventilator , aluminium section weighing 0.55 kg/ m with powder coating of any colour (Thickness or powder coating not less than 50 micron). including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolt anodised aluminum snap beading screws etc. complete all as specified (Make JINDAL/HINDALCO) |
| 88 | S&F stainless steel butt hinges of size 100mm long for fixing of pvc door shutter etc complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F Powder coated Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F Powder coated Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F Powder coated Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed |
| 93 | S&F door closer aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 94 | S&F in repairs of stainless steel curtain rod 20 mm dia, 1mm thick with SS bracket and SS domes at end, heavy duty,complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F 2mm thick Fibre glass reinforced translucent Plain/corrugated sheeting with two corrugations side lap fixed with coach screw andwasher in roof, wall etc and also Including Taking Down of old exist sheet from any discription and any position all as specified and directed by Engr-in-Charge. |
| 96 | S&F rolled mild steel any sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. |
| 97 | Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets cupboard, partition & almirahs and shelves of any size drawers openable leaf complete and also include dismantling of old board of any size and any discription from any position complete all as specified and directed as under :-Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge |
| 98 | S&F Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 99 | S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 100 | S&F 100mm long Hasp & staple, safety type, aluminum anodised with hinge pin including bolt to hinge plate with screws complete all as specified and directed. |
| 101 | Surface excavation n.exc (not exceeding) 30 cm deep and veraging 15cm deep and getting out all as specified and directed. |
| 102 | M&L for hardcore of broken stone or boulders of gauge n.exc.63mm,deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface. |
| 103 | M&L for cement concrete in foundation type C-2, 1:3:6 ( using 40 mm graded crushed stone aggregate) as in filling and mass concrete. |
| 104 | M&L for 100mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in sub base complete all as specified and directed. |
| 105 | Removing excavated material exc 250 m but n. exc. 500m and depositing where directed at a level not exc 1.5 mtr above the starting point. |
| 106 | Formwork to sides of concrete for fair finished Surface of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed. |
| 107 | S&F mild steel structural work as in joist, channel, Grill,Griting,flats,hold fast,angle or tee sections,fixed independently without connecting plates etc cut to ordinary lengths complete all as specified & directed by Engr-in-Chrg. |
| 108 | Prepration of New concrete Surfaces plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint with Priming paint palaster coat all as specified and directed. |
| 109 | M&L for providing and applying complete weather-resistant Acrylic Cushion Synthetic Sports Flooring System for outdoor badminton court over existing prepared cement concrete/bituminous surface, including cleaning and preparation of surface, minor crack/pinhole filling, approved compatible bonding primer, acrylic levelling/resurfacing coat, two rubber-infused acrylic cushion coats and two UV-resistant weather-resistant coloured acrylic sports top coats, complete as per approved manufacturer's system specification and as directed by Engineer-in-Charge.The item shall include all materials, labour, tools & tackles, plant, transportation, mixing, application, drying/curing, wastage and all incidental operations necessary for complete execution. Court setting out and standard badminton court line marking with approved weather-resistant white sports paint shall also be included in the item and shall not be paid separately.The flooring system shall provide a uniform, durable, resilient and non-slip outdoor sports surface, suitable for badminton court use. Materials shall be new and of approved quality and compatible as a complete system. The contractor shall submit manufacturer's technical data/system specification for approval before commencement. Minimum thickness/material consumption and warranty shall be as specified in the approved system specification. Complete all as specified and directed by Engineer-in-Charge. |
| 110 | Sch 'A' Part-I E/M Work:-Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. |
| 111 | M&L for point wiring in repair for light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box of approved thickness with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). |
| 112 | All as per Srl item No 111 here-in-before but for call Bell point complete all as specified and directed . |
| 113 | All as per Srl item No 111 here-in-befor but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed. |
| 114 | All as per Srl item No 111 here-in-befor but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 115 | M&L for point wiring in repair with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable in existing PVC concealed conduit terminated in new anodised pressed steel sunken box approved thickness with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). |
| 116 | S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. |
| 117 | S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. |
| 118 | S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. |
| 119 | S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. |
| 120 | S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed. |
| 121 | S&F of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge. |
| 122 | S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed. |
| 123 | S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed. |
| 124 | S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including inbuilt ind driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed. |
| 125 | S&F in replacement CFLs with LED Lamp, B22 type ,12 watt,complete all as specified and directed. |
| 126 | S&F in replacement energy saving decorative 20W LED batten light fitting (3 in 1 i.e. cool white, off white and warm white) 6500K, 4000K and 3000K type, light fitting axtruded PVC houshing provided for efficient heat dissipation with polycorbonate diffuser and intregrated electronic driver complete with all accessories prewired without tube and making connections with twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. |
| 127 | S&F LED flood light fitting of 50 watts, energy saving, envirmental friendly, long life, exclusive innovative die-cast aluminium IP-65, with high power LEDs as light source, suitable for highlighting architectural features on existing high mast poles/wall/any position or place on existing/new place and making connection with provision of PVC insulated copper conductor of suitable size complete all as specified and directed by Engineer -in-charge. |
| 128 | M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and S&F propeller MS ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 129 | M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and S&F MS ventilating fans Single phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. |
| 130 | S&F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed . |
| 131 | S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 132 | S&F in replacement for MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 133 | S&F in replacement for MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 134 | S&F in replacement sub Main Wiring with PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. |
| 135 | All as per srl item No 134 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead complete all as above but 4.00 Sqmm |
| 136 | S&F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. |
| 137 | S&F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length on less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. |
| 138 | M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted). |
| 139 | S&F in repair LED luminaire 600 mm X 600 mm , 35/36 watt 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & driver & LED lamp suitable for roof ceiling including connecting up with driver flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge. |
| 140 | Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed. |
| 141 | Attending of day to day Repair and maintenance and making the continuity of supply after rectify the faults of the eletrical items such as switches, socket, regulator replacement of fuse wires , distribution boards MCB (light/Power) lamp holders (bracket/Pandents/ batten) bell/ buzzer, push button, ceiling rose capacitors and other similar electrical items/ fittings etc, including providing of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length notexceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note:- (i) any accessories found unserviceable that shall be paid as supply & Fixing under respective item No. 182 to 198 of this Sch 'A' . (ii) one job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable. (iii) The area for attending the complaints are OTM Accn under AOR of the GE (W) pathankot. (iv) Each complaints attended/ rectified shall be measured as one job. (v) The contractor shall depute necessary man power on daily basis for rectifying the jobs including Sundays & holidays. (vi) Complaint slips/job card books ( as per format given by MES) in duplicate with machine made Srl. no. and date etc for recording day to day complaints & complaint register ( as per format given by MES) will be provided by the contractor at his own expense during currency of the contract. All complaint slips / Job cards books etc always shall be kept with JE E/M in complaint cell. (vi) Contractor /Rep will updtae the complaint register such as pastin of duplicate job slips in books , summary of qty balance in r/o CA qty on daily basis as directed. (v) Cost of taking down of defective item under ser item No 182 to 198 deemed to be included in this item |
| 142 | S&F Socket outlet 2 in 1, 3 pin, 5A complete in existing circuit complete as directed buy Engr-in-charge. |
| 143 | S&F switch piano flush button single pole one way 5 Amp 230 volts in existing circuit as directed buy Engr-in-charge. |
| 144 | S&F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. |
| 145 | S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. |
| 146 | S&F Switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge.. |
| 147 | S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type, 230 volts complete all as specified and directed by Engr-in-charge.. |
| 148 | S&F Switch socket combination 2 in 1, 3 pin, 6 Amps flush type, 230 volts complete all as specified and directed by Engr-in-charge.. |
| 149 | S&F Buzzer Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge. |
| 150 | S&F LED decorative wall light fixture made up of polycarbonate, suitable for retrofit LED lamp alongwith 12W LED lamp complete all as specified and as directed. |
| 151 | S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings in existing circuit complete all as specified and directed. |
| 152 | S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed. |
| 153 | S&F Gang Box 15 Amp Switch socket combined complete all as specified and directed by Engr-in-charge. |
| 154 | S&F Gang Box 5 Amp Switch socket combined complete all as specified and directed by Engr-in-charge. |
| 155 | S&F MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 156 | S&F MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed. |
| 157 | S&F MCB SPN 240 volts any rating from 63 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed. |
| 158 | S&F in replacement energy saving decorative 20W LED batten light fitting (3 in 1 i.e. cool white, off white and warm white) 6500K, 4000K and 3000K type, light fitting axtruded PVC houshing provided for efficient heat dissipation with polycorbonate diffuser and intregrated electronic driver complete with all accessories prewired without tube and making connections with twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. |
| 159 | S&F in replacement single phase electric meter 10-60 Amp, class-1 having plycorbonate strong body with LCD display including meter box and electric connection with 4 sqmm copper wire complete all as specified and as directed by Engg-in-chargNote:- Old unserviceable meter will be deposited in AGE E/M store |
| 160 | Maintenance of storage type electric water heater capacity 25/50 ltr comprising of the following activityes:- (a) Taking down making by disconnecting electric and water connection and maling visual inspection opening and dismantling, de-scaling, brushing and cleaning of storage tank of any type and checking of each item for its servicieability and re-assembled the same after neccessary repair and testing.(b) Checking the earth continuity of gysers water heater and accessories.(c) Visual examination of fusible plug. |
| 161 | S&F PVC flexible copper cable sheathed 3 core, 1.5 Sqmm, universal colour code, complete all as specified and directed by Engineer-in-Charge. |
| 162 | S&F heating element of capacity 2KW, Single phase, complete all as specified and directed by Engineer-in-Charge. |
| 163 | S&F thermostate of 25/50 Ltrs capacity, 250 Volts, AC and testing, complete all as specified and directed by Engineer-in-Charge. |
| 164 | S&F PVC connection of size 15mm dia and 450mm long, superior quality for Geyser, complete with brass adopted for Geyser hot/cold, complete all as specified and directed by Engineer-in-Charge. |
| 165 | S&F metal clad plug top 20 Amps, complete all as specified and directed by Engineer-in-Charge. |
| 166 | S&F plug top of 15 Amps, complete all as specified and directed. |
| 167 | S&F syphon assembly complete for 25 Ltrs capacity Geyser as per existing size complete all as specified and directed by Engineer-in-Charge. |
| 168 | S&F indicator lamps to Geyser of any make, type & capacity, complete all as specified and directed by Engineer-in-Charge. |
| 169 | S&F inner tank of Geyser of capacity 25 Ltrs of suitable size, made of steel as per existing gauge, complete all as specified and directed by Engineer-in-Charge. |
| 170 | S&F pressure release valve of geyser (ISI Marked) of 15mm dia with rubber washer, complete all as specified and directed by Engineer-in-Charge. |
| 171 | Taking out existing defective/worn out condenser any S&F new condenser of capacity 2.5mfd, 220 V including making connections etc complete all as specified and as directed. |
| 172 | S&F in repair street light fitting energy saving high efficiency LED street light fitting 45 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 1.5 sqmm from aluminium conductor on pole to light fittings or as directed by Engr-in-chrage. |
| 173 | Supply, laying, jointing, connecting and testing in replacement PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core confirming to IS-7098(Part-I-1988) in PVC conduit 32mm heavy duty alongwith walls or in poles through pipe complete all as specified and as directed. complete all as specified |
| 174 | M&L for ACSR conductor for over head lines on pole stretching without kinks and bends including binding wire and dismantling old UNSV ACSR conductor complete all as specified & directed. |
| 175 | S&F in replacement shackle type porcelain vitreous white, brown or green insulator in replacement having working pressure 1100 Volts of 115mm dia 100mm height including galvanized mild steel strip of size 31x5mm ,size 14mm dia insulator nuts, bolt and washers including dismantling Old UNSV insulator complete all as specified and directed. |
| 176 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 38,038.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender