Tender For Repair/Replacement/Maiintenance Ofdi/Gi/Ci Pipe Lines, Fittings, Servicing To Water Level Indicatorss, Valves, Ug/Oh Tanks Servicing, Cleaning And Connected Works At Nofra And Out Laying Area Under Ge (Nw) Nofra
Tender Value
1.39 Crore
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement/Maiintenance Ofdi/Gi/Ci Pipe Lines, Fittings, Servicing To Water Level Indicatorss, Valves, Ug/Oh Tanks Servicing, Cleaning And Connected Works At Nofra And Out Laying Area Under Ge (Nw) Nofra
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out soft/loose soil for laying of cable , pole,stay pit ,pipe line complete all as specified and directed . |
| 2 | Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed . |
| 3 | Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed . |
| 4 | M&L for PCC 1:3:6 type C2 (using 20 mm graded crushed stone aggregate) for filling in hard standing, plinth protection of semi under tank and suport to main water supply pipe line complete all as directed by Engineer-in-Charge. |
| 5 | M&L for repair and construciton of valve pit brick masonry valve with brick masonry sub class b bricks in cement mortaar 1:4 of size 75 x 75 x 75 cm (finished internal dimensions ) and 15 mm thick plaster on wall surface finished even and smooth with out using extra cement in cement mortar 1:4 and painted with extrnal emulsion paint and 50 mm thick PCC 1:2:4 type B-1using 20 mm crushed stone aggregate for copping and fixing new angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint over a coats of red oxide primer including preperation of mew steel surface and necessary excavation in any type of soil, including demolation of damaged existing valve pit complete all as specified and directed by Engr-in-Charge |
| 6 | M&L for of brick masonry valve pit of size (105 x 105 x 105cm (finished internal dimensions ) and 15 mm thick plaster on wall surface finished even and smooth with out using extra cement in cement mortar 1:4 and painted with extrnal emulsion paint and 50 mm thick PCC 1:2:4 type B-1using 20 mm crushed stone aggregate for copping and fixing new angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint over a coats of red oxide primer including preperation of mew steel surface and necessary excavation in any type of soil, and removing the surplus soil form MD land complete all as specified and directed by Engr-in-Charge |
| 7 | Repair to broken brick masonry valve pit of approx size 0.75 x 0.75 x 0.75 mtr to 1.1 x 1.1 x 1.1 mtr (finished internal dimensions ) and 15 mm thick plaster on wall surface finished even and smooth with out using extra cement in cement mortar 1:4 and painted with extrnal emulsion paint and 50 mm thick PCC 1:2:4 type B-1using 20 mm crushed stone aggregate for copping and fixing new angle iron frame 40 mm x 40 mm x 6 mm with 4 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint over a coats of red oxide primer including preperation of mew steel surface and necessary excavation in any type of soil, including demolation of damaged existing valve pit complete all as specified and directed by Engr-in-Charge |
| 8 | M & L for repair of rusted /broken rubber packing both side of non return valve of CI body 80/ 100/150 mm bore Opening both side flanged with rubber packing including nuts bolts and wahsers etc complete asspecified and directed. |
| 9 | M&L for cleaning and painting external surface with cement based paint complete, colour as existing Semi under ground RCC sump of Capacity 0.10 to 0.50 lakh ltr water at pump house after draining out the water scraping out bottom and side of wall with wire brush and bleaching powder, removing scaling fungus, flushing thoroughly with clean water, applying on coat of white washing after drying inside, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 20mm size on external surface of wall with white enamel paint over black paint surface all as directed by Engr-in-Charge |
| 10 | M&L for cleaning and painting external surface with cement based paint complete, colour as existing Semi under ground RCC sump of Capacity 01 lakh ltr water at pump house after draining out the water scraping out bottom and side of wall with wire brush and bleaching powder, removing scaling fungus, flushing thoroughly with clean water, applying on coat of white washing after drying inside, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 20mm size on external surface of wall with white enamel paint over black paint surface all as directed by Engr-in-Charge |
| 11 | M&L for cleaning and painting external surface with cement based paint complete, colour as existing Semi under ground RCC sump of Capacity 1.5 to 3.15 lakh ltr water at pump house after draining out the water scraping out bottom and side of wall with wire brush and bleaching powder, removing scaling fungus, flushing thoroughly with clean water, applying on coat of white washing after drying inside, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 20mm size on external surface of wall with white enamel paint over black paint surface all as directed by Engr-in-Charge |
| 12 | M&L for cleaning and painting external surface with cement based paint complete, colour as existing overhead RCC tank at the top of the building up to G+15 of Capacity 10000 to 30000 ltr water after draining out the water scraping out bottom and side of wall with wire brush and bleaching powder, removing scaling fungus, flushing thoroughly with clean water, applying on coat of white washing after drying inside, writing of tank capacity and date of cleaning and due date of cleaning in capital letters of 20mm size on external surface of wall with white enamel paint over black paint surface all as directed by Engr-in-Charge |
| 13 | S&F in repair 3 pole power contaractor ML-4 suitable for motor upto 40 HP complete all as specified and directed. |
| 14 | S&F in repair 3 pole power contaractor ML 6 suitable for motor upto 40 to 70 HP complete all as specified and directed. . |
| 15 | S&F in repair 3 pole power contaractor MNX 80 suitable for motor upto 60 HP complete all as specified and directed. |
| 16 | S&F in repair 3 pole power contactor MNX type suitable for motor upto 40 HP complete all as specified and directed. |
| 17 | M&L for cleaning of overhead PVC tanks of capacity 500 to 2000 ltrs in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker showing the date of cleaning complete all as specified and directed . |
| 18 | M&L for cleaning of overhead PVC tanks of capacity 2000 to 5000 ltrs in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker showing the date of cleaning complete all as specified and directed . |
| 19 | S&F in repair rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with float valve PTMT 20mm and including GI fitting at a height of bldg up to G+15 complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repair rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with float valve PTMT 20mm and including GI fitting at a height of bldg up to G+15 complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repair rotational moulded polyethylene water storage tanks of 2000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with float valve PTMT 20mm and including GI fitting at a height of bldg up to G+15 complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repair rotational moulded polyethylene water storage tanks of 3000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with float valve PTMT 20mm and including GI fitting at a height of bldg up to G+15 complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair rotational moulded polyethylene water storage tanks of 5000 Litre capacity (cylindrical vertical with closed top) hoisted and fixed in position with float valve PTMT 20mm and including GI fitting at a height of bldg up to G+15 complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repair plastic water tank top cover double lock of capacity of tank 500 litre to 2000Ltr design in round shape to provide complete coverage and protection to the water tank and equipped with a closing lid mechanism ensuring secure sealing and preventing contaminants entering the water complete all as specifed and directed by Engr in Charge. |
| 25 | S&F in repair plastic water tank top cover double lock of capacity of tank above 2000 litre to 5000Ltr design in round shape to provide complete coverage and protection to the water tank and equipped with a closing lid mechanism ensuring secure sealing and preventing contaminants entering the water complete all as specifed and directed by Engr in Charge. |
| 26 | M&L for taking out existing foot valve of any size from underground tank and disconnecting from the suction pipe and cleaning the same if serviceable conditin then refixing in the same postion complete all as specified and directed by Engr in Charge. |
| 27 | S&F in repair sluice valve size 80 mm bore cast iron body flanged type with spindle ISI Marked including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position conforming to IS-14846 PN-1.6 of size 80 mm dia all as directed . |
| 28 | S&F in repair sluice valve size 100 mm bore cast iron body flanged type with spindle ISI Marked including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position conforming to IS-14846 PN-1.6 of size 80 mm dia all as directed . |
| 29 | S&F in repair sluice valve size 150 mm bore cast iron body flanged type with spindle ISI Marked including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position conforming to IS-14846 PN-1.6 of size 80 mm dia all as directed . |
| 30 | S&F in repair sluice valve size 200 mm bore cast iron body flanged type with spindle ISI Marked including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position conforming to IS-14846 PN-1.6 of size 80 mm dia all as directed . |
| 31 | S&F in repair in repair cast iron body foot valve 50 mm bore one end flanged and other end CI jallis with neoprene ball duly tested and confirming IS complete all as specified and directed. |
| 32 | S&F in repair in repair cast iron body foot valve 80 mm bore one end flanged and other end CI jallis with neoprene ball duly tested and confirming IS complete all as specified and directed. |
| 33 | S&F in repair in repair cast iron body foot valve 100 mm bore one end flanged and other end CI jallis with neoprene ball duly tested and confirming IS complete all as specified and directed. |
| 34 | S&F in repair in repair cast iron body foot valve 150 mm bore one end flanged and other end CI jallis with neoprene ball duly tested and confirming IS complete all as specified and directed. |
| 35 | S&F in repair water level indicator one Nos of each semi under ground sump with all accessories i.e Angle iron of suitable size including wedlng work wire as required gauge, PVC cane/drum , moving roller , welding work etc and one coat of synthetic enamel black paint front / back side and written / marking level gauge with white /red paint with all necessary safety equipment, helmet, ladder, rope, safety belt etc provided by contractor , complete all as specified and directed by Engineer-in-charge. |
| 36 | M&L for Painting of CI/GI pipe line 40 mm to 150mm bore inside the pump house and out side each pump house and all sluice valve, NRV gate valve) with one coat of synthetic enamel paint of existing colour shade with spray gun machine including preperation of surfaces complete all as specified & directed by Engr-in-Charge |
| 37 | S&F in repair iron coupling from 60 HP to 75 HP motor / pump and fixing with cotter pin, rubber piece and nut bolts as per sample complete all as specified and directed by Engr in Charge. |
| 38 | S&F in repair iron coupling from 40 HP to 50 HP motor / pump and fixing with cotter pin, rubber piece and nut bolts as per sample complete all as specified and directed by Engr in Charge. |
| 39 | S&F in repair iron coupling from 05 HP to 30 HP motor / pump and fixing with cotter pin, rubber piece and nut bolts as per sample complete all as specified and directed by Engr in Charge. |
| 40 | S&F in repair rubber coupling from the 60 HP to 75 HP motor / pump and with rubber piece and nut bolts complete all as specified and directed by Engr in Charge. |
| 41 | S&F in repair rubber coupling from the 40 HP to 50 HP motor / pump and with rubber piece and nut bolts complete all as specified and directed by Engr in Charge. |
| 42 | S&F in repair rubber coupling from the 05 HP to 30 HP motor / pump and with rubber piece and nut bolts complete all as specified and directed by Engr in Charge. |
| 43 | S&F in repair non return valve of CI body ISI marked 80 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete all as specified and directed. |
| 44 | S&F in repair non return valve of CI body ISI marked 100 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete all as specified and directed. |
| 45 | S&F in repair non return valve of CI body ISI marked 150 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete all as specified and directed. |
| 46 | S&F in repair non return valve of CI body ISI marked 200 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete all as specified and directed. |
| 47 | S&F in repair of cast iron lid including locking arrangements black paint in /out side fixed on RCC water tank on top of building cap of tank 20000 gallons capacity |
| 48 | M&L for disconnecting the unserviceable pump set of capacity 60 to 75 HP any make from the pump foundation after opening nuts/bolts, transporting from site to workshop, dismantling pump, removing worn out impeller, gasket, and replacene the unserviceable parts , gland packing, greasing, transporting back to pump house and refixing on the existing foundation, connecting the electrilc connection to the motror and testing complete to entire satisfaction of Engineer-in-Charge. |
| 49 | All as per srl item No 48 here in before but pump of capacity 40 HP |
| 50 | All as per srl item No 48 here in before but pump of capacity 30 HP |
| 51 | All as per srl item No 48 here in before but pump of capacity 10/15 HP |
| 52 | All as per srl item No 48 here in before but pump of capacity 5/7.5 HP |
| 53 | All as per srl item No 48 here in before but pump of capacity 2 to 3 HP Please Enable Macros to View BoQ information |
| 54 | All as per srl item No 48 here in before but pump of capacity 2 to 3 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender