Tender For Replacement Of Old Sub Main Distribution Panel And Ug Cable Of Administrative Block I/C Replacement Of Damage Sections Of Ug Cables And Control Panel Of Street Light At Police Training School, Prothrapur Under E&M Division Apwd, Prothrapur
Tender Value
19.31 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
5 days left
EMD
38629
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Sub Main Distribution Panel And Ug Cable Of Administrative Block I/C Replacement Of Damage Sections Of Ug Cables And Control Panel Of Street Light At Police Training School, Prothrapur Under E&M Division Apwd, Prothrapur .
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as requireda) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 2 | b)4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 3 | Supplying of XLPE Insulated, Cores Laid Up, PVC Inner sheathed sheathed (Heavy Duty) armoured XLPE power cable with 2 aluminium conductor for working voltage 1100 V confirms to ISI standard Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.a) 6 Sq mm x 3 Core |
| 4 | b)10 Sq mm x 4 Core |
| 5 | c) 25 Sq mm x 3.5 Core |
| 6 | d) 35 Sq mm x 3.5 Core |
| 7 | e) 150 Sq mm x 3.5 Core |
| 8 | Supplying of Double Walled Corrugated high density polythelene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS 14930 part-I and II of the following sizes.a) 50 mm outer dia 38 mm inner dia nominal size |
| 9 | b) 63 mm outer dia 50 mm inner dia nominal size |
| 10 | c) 120 mm outer dia 103 mm inner dia nominal size |
| 11 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 12 | Laying of one number PVC insulated and PVC sheathed / XLPE 5 power cable of 11 KV grade of following size in the existing DWC/HDPE/METAL pipe as required.a) Upto 120 sq. mm |
| 13 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size on open surface horizontal/vertical as required.a) Upto 120 sq. mm |
| 14 | Laying of one number Double wall corrugated HDPE pipe of following size on any horizontal/ vertical surface including fixing of clamps and snap-fit couplers etc as requireda) 120 mm Outer Dia (clamped with 2mm thick G.I clamps) |
| 15 | Laying of one number Double wall corrugated HDPE pipe of following size on any open surface horizontal/vertical including snap-fit couplers etc as required.a) 50 mm outer dia |
| 16 | b) 63 mm outer dia |
| 17 | c) 120 mm outer dia |
| 18 | Laying of one number Double wall corrugated HDPE pipe directly in ground at a depth of 50 cm including excavation and refilling etc as required but excluding sand cushioning and protective covering.a) 50 mm outer dia |
| 19 | b) 63 mm outer dia |
| 20 | c)120 mm outer dia |
| 21 | Supplying and laying of 100 mm dia medium class G.I in ground including cutting of suitable size trenching in cement concrete and plastering the same etc as required Make: Jindal or its equivalent. |
| 22 | Supplying and laying of 65 mm dia medium class G.I in ground including cutting of suitable size trenching in cement concrete/road and plastering the same etc as required. Make: Jindal or its equivalent. |
| 23 | SITC of pewired L.T Pannel 3 phase 415 V, 50 Hz Make: Indoasian Code:812188 or equivalent in make double door Sub Main Distribution Board 'F2' Frame Panel Outgoing 8 way four pole MCCB's for incomer 200 Amps ,25Ka MCCB.Should pe equiped with suitable capacity copper bus bar's and other acessories and fixtures including all electrical inerconnections etc as listed below or required and as directed by the Engineer-In-Charge.a)Bottom Cable Unit for DD SMDB's with F1 O/G only Make:Indoasian Cat No.812233 or equivalent-01 Nob)SMDB250 Cable Alley-8W DD Make: Indoasian Cat No.812237 or equivalent-02 Nos.c)Metering Unit (for DD SMDB's with F1 O/G only)- with Ammeter,Voltmeter & Phase Indicators(3nos.)Make:Indoasian Cat No.812248 or equivalent -01 Nod)Corner Unit-SD Make: Indoasian Cat No.812252 or equivalent-04 Nos.e)Fixed thermal & fixed magnetic setting four pole MCCB 200 Amps, 25 kA breaking capacity (incomer).Make: Indoasian Cat No.830106 or equivalent -01 Nof)Fixed thermal & fixed magnetic setting four pole MCCB 100 Amps, 25 kA breaking capacity(outgoing). Make: Indoasian Cat No.830052 or equivalent -01 Nog)Fixed thermal & fixed magnetic setting four pole MCCB 80 Amps, 25 kA breaking capacity(outgoing). Make: Indoasian Cat No.830051or equivalent -01 Noh)Fixed thermal & fixed magnetic setting four pole MCCB 63 Amps, 25 kA breaking capacity(outgoing). Make: Indoasian Cat No.830050 or equivalent-06 Nos. |
| 24 | Fabrication, installation, testing and commissioning of L.T outdoor type self supported cubical LT Panel board of size not less then 600 X 600 X 300 mm, dust and vermin proof made out of 1.6 mm thick CR sheet with sloped top roof front and rear opening, double leaf hinged door with locking arrangement, embedded in PCC 1:2:4 .All electrical fittings to be interconnected with 16 Sq mm copper cable , lugs of sizes i/c incomming/outgoing cable glands etc as required. Busbar shall be provided with colour coded rubberized sleeves bands for phases and neutral identification and duly painted with two coats of metal primer and two coats of synthetic enamel etc complete as required fixed and interconnected with items listed below and as directed by the Engineer-In-Charge.a)Copper Busbar strips of size 25 X 5 X 300 mm colour coded rubberized sleeves and fixed with insulators -04 No'sb)160 Amps,25Ka ,Four Pole MCCB Make: Indoasian Cat No.830105 or equivalent -01 No.c) 200 Amps,415V porceline rewireable fuse Unit Make :Anchor,Code:17312 or equivalent- 03 No's |
| 25 | Fabrication, installation, testing and commissioning of L.T outdoor type self supported cubical LT Panel board of size not less then 600 X 600 X 300 mm, dust and vermin proof made out of 1.6 mm thick CR sheet with sloped top roof front and rear opening, double leaf hinged door with locking arrangement, embedded in PCC 1:2:4 .All electrical fittings to be interconnected with 16 Sq mm copper cable , lugs of sizes i/c incomming/outgoing cable glands etc as required. Busbar shall be provided with colour coded rubberized sleeves bands for phases and neutral identification and duly painted with two coats of metal primer and two coats of synthetic enamel etc complete as required fixed and interconnected with items listed below and as directed by the Engineer-In-Charge.a)Copper Busbar strips of size 25 X 5 X 300 mm colour coded rubberized sleeves and fixed with insulators -04 No'sb)100 Amps,25Ka ,Four Pole MCCB Make: Indoasian Cat No.830152 or equivalent -01 No.c)100 Amps,415V porceline rewireable fuse Unit Make :Anchor,Code:17312 or equivalent- 03 No'sd)24 Hour Analog Time Switch (SST* - 15 min) Make : Havells Code: DHTED15016 or equivalent -01 No.e)25A,3 Pole 415V AC Coil Power Contactor,Make:C&S Model:TC1-D2510 or equivalent -01 No. |
| 26 | Supplying and fixing of Fixed thermal & fixed magnetic setting four pole MCCB 200 Amps, 25 kA breaking capacity on existing pannel i/c removing old MCCB & making necessary connections as directed by the Engineer-in-charge.Make: Indoasian Cat No.830106 |
| 27 | Supplying and fixing of Fixed thermal & fixed magnetic setting four pole MCCB 160 Amps, 25 kA breaking capacity on existing pannel i/c removing old MCCB & making necessary connections as directed by the Engineer-in-charge. Make: Indoasian Cat No.830105 or its equivalent. |
| 28 | Supplying and fixing of Fixed thermal & fixed magnetic setting three pole MCCB 63 Amps, 25 kA breaking capacity on existing pannel i/c removing old MCCB & making necessary connections as directed by the Engineer-in-charge. Make: Indoasian Cat No.830036 or its equivalent. |
| 29 | Supplying and fixing of SMC Junction Box size 140X140X95 with 02 Nos G.I Clamps on existing street light poles i/c fixing 01 No 3 way Porcelain Connector and providing 01 No 6A Single pole inside junction box and making necessary connections and removing existing junction box & as directed by the Engineer-in-charge.Make: Syntex , Indoasian Code: GSJB 1414 |
| 30 | Supplying and fixing of LED Street light fitting on existing street light poles suitable for mounting on 40 to 50mm dia GI Pipe ,70 Watts Make :Crompton ,Cat Ref:CRP-421-70-57-SL-LM-NSG or equivalent i/c removing of old street light fitting and making necessary connectionsetc and as directed by the Engineer-in-charge. or its equivalent. |
| 31 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 32 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 33 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender