Tender For Steel Rate Contract - Qtr Iii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils

Sharing tender

Tender for Steel Rate Contract - Qtr Iii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X700 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 700 X Coil Form [T X W X L] [Mm] , Cr Coil 0.63X813 X Coil Form; Is 513 Dd; Tdc:Rta:408; 0.63 X 813 X Coil Form [T X W X L] [Mm] , Cr Coil 0.63X915 X Coil Form; Is 513 Dd; Tdc:Rta:408; 0.63 X 915 X Coil Form [T X W X L] [Mm] , Gp Sheet 0.63 Mm Class Viii Is 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Cr Coil 0.80X650 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.8 X 650 X Coil Form [T X W X L] [Mm] , Cold Rolled Coil 1.25 X 903 Is 513 Gr.Cr3 Tdc:Rte:257 Rev:04; 1.25 X 903 X Coil Form [T X W X L] [Mm] , Cr Sheet 1.6 Mm Is 513 Cr2 - Kld; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 1.6 Mm Is 1079 Gr.Hr2 Sk/K; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 2 Mm Is 5986 Gr 205; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 1250 X 2500 [T X W X L] [Mm] , Hr Sheets 2 Mm Is 1079 Gr.Hr1 Sk/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 2 Mm Is 1079 Gr.Hr2 Sk/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 2.5 Mm Is 5986 Gr 205; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 2.5 Mm Is 1079 Gr.Hr2 Sk/K; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , 3.0 Mm X 1250 Mm X 2500 Mm Crc Steel Sheets Annealed To Specification Aa 10115 Rev-09 (Is 513 Cr2 Kld); 3 X W=1250 X L=2500 [T X W X L] [Mm] , Hr Sheet 3.15 Mm Is 5986 Gr 205; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr1 Sk/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr2 Sk/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 4.0Mm Is 5986 Gr 205; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 4 Mm Is 1079 Gr.Hr2 Sk/K; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Pl 4 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 4 (T) X 900/ 1200/ 1235/ 1500 (W) X 2500 (L) [Mm]; 4 X 900/1200/1235/1500 X 2500 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Cq Pl 5 Mm Is 3502; 5 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:386; 5 (T) X 1500 ≤ W ≤ 1800 (W) X (6300-12000) (L) [Mm]; 5 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 5 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 5 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 5 X 1200/1235/1500 X 6500 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is 2062 E 250 Gr A/Br/Sk/K; 6 X W ≤ 1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E350 Gr B0/K Tdc:301; 6 (T) X 1500 ≤ W ≤ 1800 (W) X (6300-12000) (L) [Mm]; 6 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Cq Pl 6 Mm Is 3502; 6 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K ; Tdc:301 ; 6 (T) X 1500 ≤ W ≤ 1800 (W) X (6300-12000) (L) [Mm]; 6 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 (T) X 2000 (W) X (6300-12000) (L) Mm; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 6 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 6 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 6 X 1200/1235/1500 X 6500 [T X W X L] [Mm] , Pl 6 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 6 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 6 X 1200/1235/1500 X 6500 [T X W X L] [Mm] , Pl 7 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 7 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 8 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12, Width 2500 Mm, Length 9000 Mm; 8 X 2500 X 9000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 2900 X 10000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Cq Pl 8 Mm Is 3502; 8 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:301; 8 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E250br/K Tdc:6:386,; 8 X 2500 X 12000 [T X W X L] [Mm] , Plate 8.00 Mm - Sa515gr70; 8 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 8 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 8 (T) X 1200/ 1235/ 1500 (W) X 7500 (L) [Mm]; 8 X 1200/1235/1500 X 7500 [T X W X L] [Mm] , Pl 8 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 8 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 8 X 1200/1235/1500 X 7500 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr Br/K Tdc:386; 10 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 10 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 10 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc 301 , Width 2000Mm, Length 12000 Mm; 10 X 2000 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:301; 10 (T) X 2500 (W) X (6300-12000) (L); 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:301; 10 (T) X 2000 (W) X (6300-12000) (L); 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 10000Mm; 10 X 2500 X 10000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:386; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Cq Pl 10 Mm Is 3502; 10 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:301; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 (T) X 2000 (W) X (6300-12000) (L) Mm; 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:386; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br./K; Tdc:386 + Normalizing Rolling; 10 (T) X 2500 (W) X 12500 (L) [Mm]; 10 X 2500 X 12500 [T X W X L] [Mm] , Pl 10 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 10 X 2500 X 6500 [T X W X L] [Mm]; 10 X 2500 X 6500 [T X W X L] [Mm] , Plate 10.0 Mm - Sa515gr70; 10 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 10 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 10 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 10 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 10 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 10 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 10 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr Br/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 12 X W= 2500 X 1000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 12 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 12 X 2500 X 12000 [T X W X L] [Mm] , Pi 12 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 (T) X 2000 (W) X (6300-12000) (L) Mm; 12 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br./K; Tdc:386 + Normalizing Rolling; 12 (T) X 2500 (W) X 10000 (L) [Mm]; 12 X 2500 X 10000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr B0/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12Mm A516 Gr. 70; Tdc: Aa10403 Rev 01 + Supplementry Rquirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure- 1)+Bend Test (Sl. No. 5 Of Annexure-1) .; 12 X 3000 X 8000 L 12000 [T X W X L] [Mm] , Plate 12.0 Mm - Sa515gr70; 12 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 12 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 12 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 12 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 12 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 12 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 12 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 12.7 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [Mm] , Pl 14 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 14 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 14 X 2500 X 6500 [T X W X L] [Mm] , Plt Bq 14 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) +Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 14 X 2000 X 8000 [T X W X L] [Mm]; 14 X 2000 X 8000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12; 16 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 16 X 2500 X 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:301; 16 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 16 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 16 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr Br/K Tdc:301; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 (T) X 2500 (W) X (6300-12000) (L) Mm; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250 Gr Br_Tdc:6:386 Rev 03; 16 X 3400 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K; Tdc:386 + Normalising + Ust As Per Astm A578 Level B, 16 (T) X 2500 (W) X 12500 (L) [Mm]; 16 X 2500 X 12500 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr B0/K Tdc:386; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70- Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 16 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 5700 [T X W X L] [Mm]; 16 X 2500 X 5700 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 7500 [T X W X L] [Mm] , Pl 16 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 16 X 2500 X 6300 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2000 X 10000 [T X W X L] [Mm; 16 X 2000 X 10000 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2500 X (6300 ≤ L ≤ 10000) [T X W X L] [Mm]; 16 X 2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 16 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 16 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 16 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 16 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 16 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 16 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 18 Mm Is2062 E350 Gr Br/K Tdc:301; 18 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 18 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 20 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Plate-20 Is2062 E250br Tdc:301 Rev 12; 20 X 2500 X 7925 [T X W X L] [Mm] , Pi 20 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 20 X W= 2500 X L = 12000 [T X W X L] [Mm] , Plate 20.0 Mm; Is2062e350 Gr B0; Tdc:6:386:Rev:03: 20 X 2500 X (10000-12000) (T X W X L) Mm; 20 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 20 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 20 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:301; 20 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr. Br; Tdc 301; 20 (T) X 2500 (W) X 11425 (L) [Mm]; 20 X 2500 X 11425 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr Br/K Tdc:301; 20 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 (T) X 2000 (W) X (6300-12000) (L) Mm; 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 (T) X 2500 (W) X (6300-12000) (L) Mm; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 X 2500 X 7100 [T X W X L] [Mm]; 20 X 2500 X 7100 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K; Tdc:386 + Normalising + Ust As Per Astm A578 Level B, 20 (T) X 2500 (W) X 12500 (L) [Mm]; 20 X 2500 X 12500 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr B0/K Tdc:386; 20 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr B0; Tdc:386; 20 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 20 X 2200 X (10000-12000) [T X W X L] [Mm] , Plate 20.0 Mm - Sa515gr70; 20 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 20 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 20 X 2500 X 6300 [T X W X L] [Mm] , Pl 20 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 20 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 20 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 20 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 20 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 20 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 22 Mm A515 Grade-70; Aa10404; 22 X 3000 X 10000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:386; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12; 25 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:301; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:301; 25 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 25 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 25 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 25 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 25 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 25 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:301 Rev 03; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K; Tdc 301 + Ust As Per Astm A435, 25 (T) X 2500 (W) X 12500 (L) [Mm]; 25 X 2500 X 12500 [T X W X L] [Mm] , Pl.25 X 2500 X 12000 Is 2062 E250 Gr. Br. Tdc 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 (T) X 2500 (W) X (6300-12000) (L) Mm; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr B0/K Tdc:386; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 25.0 Mm - Sa515gr70; 25 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 25 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Charpy-V-Test (Longitudinal / Transverse Sample) Shall Be Performed Getting Values Of Kv 27 J At -20°C Or Kv 34 J At 0°C Or Kv 40 J At 20°C .; 25 X 3100 X 6700 [T X W X L] [Mm] , Plt Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 25 X 2500 X 13000 [T X W X L] [Mm]; 25 X 2500 X 13000 [T X W X L] [Mm] , Pl Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 25 X 2500 X 10000 [T X W X L] [Mm]; 25 X 2500 X 10000 [T X W X L] [Mm] , Pl 25 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 25 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 25 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 25 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 25 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 25 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 28 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 28 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0; Tdc:386; 28 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 28 X 2200 X (10000-12000) [T X W X L] [Mm] , Plt Bq 28 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 28 X 2500 X 13000 [T X W X L] [Mm]; 28 X 2500 X 13000 [T X W X L] [Mm] , Pl 30 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;30 Mm X 1500 Mm X 8000 Mm : T X W X L (Mm); 30 X 1500 X 8000 [T X W X L] [Mm] , Pi 30 Mm Is2062 E250 Gr Br Tdc:6:386 Rev 03; 30 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 30.0 Mm - Sa515gr70; 30 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 30 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Impact Test At Room Temperature+Orientation Of The Test Specimen In Longitudinal Direction(S5); 30 X 4000 X 6750 [T X W X L] [Mm] , Pl 30 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 30 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 30 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 32 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435,Width 2500 Mm, Length 12500 Mm; 32 X W = 2500 X L = 12500 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 32 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 32 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr. Br/K Tdc 301; 32 (T) X 2500 (W) X 7500 (L) [Mm]; 32 X 2500 X 7500 [T X W X L] [Mm] , Plate 32.0 Mm - Sa515gr70; 32 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 32 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 32 X 2500 X 6300 ≤ L ≤ 10500 [T X W X L] [Mm] , Pl Bq 32Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 32 X 2500 X 10000 [T X W X L] [Mm]; 32 X 2500 X 10000 [T X W X L] [Mm] , Pl 32 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 32 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 32 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 32 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 32 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 32 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Pi 34 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 34 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 34 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 34 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 35 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;35 Mm X 1500 Mm X 8000 Mm : T X W X L (Mm); 35 X 1500 X 8000 [T X W X L] [Mm] , Plate 35.0 Mm - Sa515gr70; 35 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435, Width 2500Mm, Length 12500Mm; 36 X W=2500 X L =12500 [T X W X L] [Mm] , Pi 36 Mm Is2062 E350 Gr Br/K Tdc 301 Rev 12; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 36 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 36 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 36 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 36 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 36 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 36 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 36 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Plate 38 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 38 X 2500 X (10000-12000) (T X W X L) Mm; 38 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 40 X W=3200 X L=6300 [T X W X L] [Mm] , Pi 40 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2, Width 3200 Mm, Length 8000 Mm; 40 X 3200 X 8000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;40 Mm X 2500 Mm X 7500 Mm : T X W X L (Mm); 40 X 2500 X 7500 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 40 X 2500 X 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X W= 2500 X L= 12000 [T X W X L] [Mm] , Plate 40.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K; Tdc 301 Rev 12 + Ust As Per Astm A435, 40 (T) X 3200 (W) X 6300 (L) [Mm]; 40 X 3200 X 6300 [T X W X L] [Mm] , Plate 40 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 40 Mm; Is2062 E250grbr; Tdc:6:386:Rev:03: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plt Bq 40 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 40 X 2500 X 9000 [T X W X L] [Mm]; 40 X 2500 X 9000 [T X W X L] [Mm] , Plate 40.0 Mm - A515gr70 + Ibr Requirement; 40 X 1000-2500 X 5000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 40 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 40 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 40 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 42 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;42 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 42 X 1800 X 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br.K Tdc 301 Rev 12;45 X 2500 X 6300-12000; ( T X W X L) Mm; 45 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;45 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 45 X 1800 X 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 45 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 45 X 2500 X 12000 [T X W X L] [Mm] , Plate 45.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 45 X 2500 X (10000-12000) (T X W X L) Mm; 45 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E350 Gr B0; Tdc:386; 45 (T) X 2000 (W) X (10000-12000) (L) [Mm]; 45 X 2000 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 45.0 Mm - Sa515gr70; 45 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 45 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 45 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 45 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 48 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;48 Mm 1800 Mm 10500 Mm : T X W X L (Mm); 48 X 1800 X 10500 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 50 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435; 50 X W = 3200 X L = 7000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;50 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 50 X 1800 X 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0; Tdc:386; 50 (T) X 2000 (W) X (10000-12000) (L) [Mm]; 50 X 2000 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 50.0 Mm - Sa515gr70; 50 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 50 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 50 X 2500 X 6300 [T X W X L] [Mm] , Pl 50 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 50 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 50 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 52 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;52 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 52 X 1800 X 12000 [T X W X L] [Mm] , Plate 55.0 Mm - Sa515gr70; 55 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 56 X 2500 X 12000 [T X W X L] [Mm] , Pi 56 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 56 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 56 X 2500 X 12000 [T X W X L] [Mm] , Plate 56 Mm; Is2062 E250gr Br; Tdc::301:Rev:12: 56 X 2500 X (10000-12000) (T X W X L) Mm; 56 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 56 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 56 X 2500 X (10000-12000) (T X W X L) Mm; 56 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E350 Gr B0; Tdc:386; 56 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 56 X 2200 X (10000-12000) [T X W X L] [Mm] , Pl 56 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 56 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 56 X 2500 X 6500 [T X W X L] [Mm] , Pi 60 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 60 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 60.0 Mm - Sa515gr70; 60 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 63 X W=2500 X L =8000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;63 Mm X 2500 Mm X 9500 Mm : T X W X L (Mm); 63 X 2500 X 9500 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 63 X 2500 X 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E350 Gr B0; Tdc:386; 63 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 63 X 2200 X (10000-12000) [T X W X L] [Mm] , Pl 63 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) Are In Mm]; 63 X 3600 X 7800 [T X W X L] [Mm] , Pl 63 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 63 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 63 X 2500 X 6500 [T X W X L] [Mm] , Plate 63.0 Mm - Sa515gr70; 63 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12;Tdc:301 Rev 12; 63 X 2500 X [6300-12000] (T X W X L) Mm; 63 X 2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 70 Mm Is 2062 E 250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 70 X W=2500 X L =8000 [T X W X L] [Mm] , Pl 70 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;70 Mm X 2000 Mm X 8500 Mm : T X W X L (Mm); 70 X 2000 X 8500 [T X W X L] [Mm] , Pl 70 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 70 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Plate 70.0 Mm - Sa515gr70; 70 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 75 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 75 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 75 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 75 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;80 Mm X 2500 Mm X 7000 Mm : T X W X L (Mm; 80 X 2500 X 7000 [T X W X L] [Mm] , Pl 80 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 80 X 2000≤ W ≤ 2500 X 6000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 80 Is 2062 E250gr-Br/K, Tdc:301, 80 X 2500 X 7650 [T X W X L] [Mm]; 80 X 2500 X 7650 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435; 80 (T) X 2500 (W) X 10000 (L) [Mm]; 80 X 2500 X 10000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 80 X 2850 X 10700 [T X W X L] [Mm]; 80 X 2850 X 10700 [T X W X L] [Mm] , Pl 80 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 80 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 80 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 80 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 80 X 2500 X 6500 [T X W X L] [Mm] , Plate 80.0 Mm - Sa515gr70; 80 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 85 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 85 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 90 Mm Is 2062 E 250 Gr Br/K; Tdc:301; 90 X 3000 X 6300 ≤ L ≤ 12600 [T X W X L] [Mm] , Pl 90 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 90 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 90 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 90 X 2500 X 6500 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E 250 Gr Br; 100 X 3000 X 6000 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E250 Gr Br; 100 X 2500 X 6000 L 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;100 Mm X 2500 Mm X 12000 Mm : T X W X L (Mm); 100 X 2500 X 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B + Through Thickness Tension Testing To Quality Class Z25 (As Per En10164); 100 (T) X 2500 (W) X 11000 (L) [Mm]; 100 X 2500 X 11000 [T X W X L] [Mm] , Pi 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X W= 4400 X L= 4600 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 100 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X 2500 X 6000 [T X W X L] [Mm]; 100 X 2500 X 6000 [T X W X L] [Mm] , Pl 100 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) Are In Mm]; 100 X 2200 X 4800 [T X W X L] [Mm] , Pl 100 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1); 100 X 2200 X 10000 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 250 Gr A/Br/Sk/K; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 110 X 2000≤ W ≤ 2500 X 6000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 110 Mm Is2062 E350 Gr Br/K Tdc:301; 110 (T) X 2850 (W) X (6300-12000) (L) [Mm]; 110 X 2850 X 6300 ≤ L ≤ 12600 [T X W X L] [Mm] , Pl 110 Mm Is2062 E250 Gr Br./K Tdc:386; 110 (T) X 2500 (W) X 10000 (L) [Mm]; 110 X 2500 X 10000 [T X W X L] [Mm] , Pl 110 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 1650 ; L= 8000;[Thickness, Length (L) & Width (W) Are In Mm]; 110 X 1650 X 8000 [T X W X L] [Mm] , Pl 110 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 110 X 2000≤ W ≤2500 X 6000 ≤ L ≤ 8000 [T X W X L] [Mm] , Pl 115 Mm Is 2062 E 250 Gr A/Br/Sk/K; 115 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 115 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 115 X W = 2500 X L = 10000 [T X W X L] [Mm] , Pl 120 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 120 X 2000≤ W ≤ 2500 X 6000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 120 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 10000;[Thickness, Length (L) & Width (W) Are In Mm]; 120 X 2500 X 10000 [T X W X L] [Mm] , Pl 130 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;130 Mm X 2500 Mm X 6000 Mm : T X W X L (Mm); 130 X 2500 X 6000 [T X W X L] [Mm] , Pl 130 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 130 X 1800 X 5600 [T X W X L] [Mm] , Pl 140 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) Are In Mm; 140 X 2000 X 10500 [T X W X L] [Mm] , Pl 190 Mm Is2062 E350 Gr C Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A435, 190 Mm X 2250 Mm X 6300 Mm T X W X L (Mm); 190 X 2250 X 6300 [T X W X L] [Mm]