Tender For Supply Installation Testing and Commissioning of Additional Air Conditioning Units For Terminal Building & Other Areas At Naini Saini Airport Pithoragarh.
Tender Value
27.68 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
7 days left
EMD
83055
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Additional Air Conditioning Units For Terminal Building & Other Areas At Naini Saini Airport Pithoragarh.
BOQ
| Sl. No. | Item Description |
| 1 | Supply , Installation , Testing , Commissioning of 4.0 TR CASSETTE type, 4 WAY, Inverter AC , 5 star rated Air Conditioner units , evaporator coil, air cooled condenser with hermitically sealed scroll type compressor, condenser coil, propeller fans controls suitable for operation on 415 V +/- 10%, 50 Hz, Three Phase AC Supply and capable of performing cooling, dehumidifying, air circulating, filtering etc., remote control, including provision of suitable angle iron stand for outdoor units, handing arrangement for indoor, supply & fixing of drain pipe upto 3.0 mtr. & supply & fixing of liquid & gas refrigerant piping with insulation i/c Silver foil wrapping upto 3.0 mtrs , as per technical specifications, complete as required. |
| 2 | Supply, Installation, Testing, Commissioning of 2.0 TR wall mounted Air Conditioner unit , Inverter AC, 5 star rated, evaporator oil, air cooled condenser ,condenser coil, controls suitable for operation on 230 V +/- 10%, 50 Hz, AC Supply and capable of performing cooling, dehumidifying, air circulating, filtering etc., remote control, including wall mounted stand for outdoor units, 05 years warranty on compressor and supply & fixing of drain pipe upto 3.0 mtr. & supply & fixing of liquid & gas refrigerant piping with insulation i/c Silver foil wrapping upto 3.0 mtrs , cabling & electrical connections, complete as required. |
| 3 | Supplying and fixing refrigerant extra copper piping suction & discharge, with power supply wire, communication & insulation, silver foil for outdoor as suitable for 1.5TR/2.0TR/4.0 TR AC complete as required. |
| 4 | Supplying and laying UPVC drain pipe of 25 mm dia. from indoor unit to drain point for Tower AC complete as required. |
| 5 | Supplying and laying of PVC Trunking with cover on surface of 100 x 50 mm size to cover the AC refrigerant piping of Tower type AC unit complete as required. |
| 6 | Supplying & laying of 3 x 2.5 Sq. mm copper conductor power cable FRLS insulated wire on surface for AC unit system, complete as required. |
| 7 | Dismantling of existing split AC units 1.5 TR /2.0 TR/Cassette AC/ window AC, including copper piping, wire, etc., and keeping all these units from the site to the AAI store in AAI colony, complete as required. |
| 8 | Supply, Installation, Testing, Commissioning of water cooler with 40 LPH and 80 litres storage capacity suitable for operation on 230 V +/- 10%, 50 Hz, single phase AC Supply and capable of performing cooling & suppy & fixing of liquid & gas refrigerant as per technical specifications, complete as required. |
| 9 | Supply, Installation, Testing, Commissioning of water Purification Units (RO) with 50 LPH capacity UV, sediment filters, Ultrafiltration with suitable for operation on 230 V +/- 10%, 50 Hz, single phase AC Supply and capable of performing cooling & supply & fixing of drain and inlet piping as per technical specifications, complete as required. |
| 10 | Supply of XLPE/PVC insulated, PVC sheathed aluminium conductor power cable of 1.1KV grade confirming to IS 7098(Part I) 1987 with upto date amendments etc as required for the following sizes (Makes: As per approved list)a) 3.5Cx35 sqmm |
| 11 | Supply of XLPE/PVC insulated, PVC sheathed Copper Flexible conductor power cable of 1.1KV grade confirming to IS 7098(Part I) 1987 with upto date amendments etc as required for the following sizes (Makes: As per approved list)a) 4Cx6 sqmm |
| 12 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as requireda) Upto 35 sqmm (clamped with 1mm thick saddle MS flat clamp) |
| 13 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.a) 3.5 C x 35 sqmm |
| 14 | Supplying and fixing 20 A, 240Volts, SPN industrial type, socket outlet with 2 pole and earth, metal enclosed plug top along with 20A \\"C\\" curve, SP, MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc as required. |
| 15 | Supplying and fixing of following ways surface/recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly power painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)a) 8 Way (4+24) double door |
| 16 | Supplying and fixing of following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.A) 100A |
| 17 | Supplying and fixing of following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.A) 40A |
| 18 | Supplying and fixing 30 A, 415 V, TPN industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A \\"C\\" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 19 | Wiring for light/power plug with 2x4 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core for loop earthing as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender