Tender For Cleaning And Repair/Replacement Of Reinforced Cement Concrete Roofs, Gi/Ac Sheet Roofs, Valley Gutters And Down Take Pipes Of Production Shops And Non- Production Shops/Buildings At Fgk.
Tender Value
30.99 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning And Repair/Replacement Of Reinforced Cement Concrete Roofs, Gi/Ac Sheet Roofs, Valley Gutters And Down Take Pipes Of Production Shops And Non- Production Shops/Buildings At Fgk.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Oct-2026 | Extension of TOD | Date | 12-Oct-2026 |
| 2 | 22-Oct-2026 | Extension of TOD 2 | Date | 02-Nov-2026 |
| 3 | 15-Oct-2026 | TOD extension | Date | 22-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of Valley Gutters and Roof Sheets. |
| 2 | Cleaning of down takes pipes |
| 3 | Cleaning of RCC roof and Chajjas |
| 4 | Cleaning of storm sewer and connected open drains of GS-I. |
| 5 | Demolition of brick work built in cement mortar. |
| 6 | Dismantling of corrugated steel sheeting. |
| 7 | S/F of 0.8mm thick galvanised corrugated mild steel Sheeting with two corrugation side lap with all fittings and fastenings. |
| 8 | S/F of 0.8mm thick galvanised plain mild steel Sheeting in ridges with all fittings and fastenings. |
| 9 | S/F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of minimum 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. All the sheets shall have 28-32mm crests depth with 06 nos crest in one sheet (of 1m width) and 02 ribs within two crests for stiffening. Make- Tata/ JSW. |
| 10 | S/F Pre-painted galvalume aluminium zinc coating GI based plain steel ridge 0.50 mm thick of any colour having tensile strength of minimum 550 Mpa fixed with self tapping screws all as specified. Make- Tata/ JSW. |
| 11 | Dismantling of Asbestos cement (corrugated or semicorrugated, etc.) sheets. |
| 12 | S/F of 6mm thick AC Sheets corrugated or semi corrugated, including all fittings and fastenings. |
| 13 | S/F of 6mm thick AC ridge or curved Sheets for the top of north light glasses, corrugated or semi corrugated including all fittings and fastenings. |
| 14 | Dismantling of structural steel work such as valley gutter, wind tie, purlins, flats, etc. |
| 15 | S & F of MS work as in plates, angles, channels for purlins, trusses, valley gutters etc. |
| 16 | S/F 6.4mm thick rough cast wired glass fixed with oil putty/silicon gel. |
| 17 | S/F 150mm dia PVC SWR pipe socketed & jointed with cement solvent jointer & accessories. Make- Supreme/Prince/Finolex. |
| 18 | S/F PVC SWR bend / shoe for 150mm dia PVC pipe. Make- Supreme/Prince/Finolex.. |
| 19 | Providing PCC type A-1, 1:1.5:3 (20 mm graded aggregate) & surface to be finished even & smooth with using extra cement. |
| 20 | M/L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar. |
| 21 | Taking down of cement plaster on brick wall including taking out joints, hacking for key, scrubbing down with water etc. along with brushing with neat cement slurry @ 3 Kg of cement per Sqm and Rendering 15mm thick on fair faces of brick work or concrete surfaces with 1:4 cement plaster and surface to be finished even and smooth (without using extra cement) |
| 22 | Preparation of new painted steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss). |
| 23 | M&L Preparation of new surfaces and applying two coats of cement paint and one coat of primer on walls. |
| 24 | Taking down old tar felt/bitumen paint. |
| 25 | Providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers/PU having Sun Reflectivity Index (SRI) of 105 or more on top of concrete roof in 3 coats @ 10.76 litre per 10 square meter. One coat of self - priming elastomeric waterproofing liquid (dilution with water in the ratio of 3:1 i.e.3 parts of waterproofing liquid and 1 part of water) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer in Charge. Make:- Asian/Nerolac/Dr.Fixit. Firm i.e. Contractor (not OEM) will provide minimum 6 years warranty of the above system and will carry out any repair free of cost if leakage or seepage is found through the above applied system. |
| 26 | S/F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, coloured tiles. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified. |
| 27 | M & L 12 MM Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid |
| 28 | Supply & Fixing of 24 inch aluminium spherical vane design heavy duty wind turbine, 42 vanes, neck and throught diameter 610mm, Al 0.5mm thick, Alloy 8011, FRP base 1.5 to 2mm |
| 29 | Structural steel (credit material). |
| 30 | Old AC sheet (credit material). |
| 31 | Plain/Corrugated steel sheeting (credit material). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Oct 22, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender