Tender For Development Of Village Panchayat Playground For V.P. Collem, Sigao In Sanvordem Constituency.
Tender Value
4.44 Crore
Estimated cost
Bid Submission
28 Sep 2026
13 days left
EMD
8.88 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Village Panchayat Playground For V.P. Collem, Sigao In Sanvordem Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, refilling, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) All kinds of soil |
| 2 | Earthwork in excavation for \\"Well\\" in all type of strata comprising any of the materials such as soil, silt, sand, gravel, morrum, pebbles and all types of conglomarates, laterite rock soft rock, ordinary rock, disintegrated rock, fissured rock, weathered rock, shattered rock, decomposed rock and all such other materials as described under appendix to these specification either in full or in parts as the case may be adopting any approved method or methods as may may be convenient or permitted inclusive of chiselling, wedging etc. excluding blasting in all conditions such as dry moist, saturated submered, foul conditions etc. including pumping or bailing out water, including setting out construction of shoring and bracing removal stumps and other deleterious matters, dressing of side and bottoms and back filling the exavated earths to the extent required and disposing the remaining excavated soil/rock as directed by Engineer-in-charge for all leads and in all lifts as specified and directed etc. complete. |
| 3 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 4 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: (a)All works upto plinth level |
| 5 | In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 6 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 7 | Centering & shuttering including Strutting, Propping & removal of forms for : Foundations, Footings, Bases for columns |
| 8 | Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like |
| 9 | Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan) |
| 10 | Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 11 | Well steining |
| 12 | Staircases (except spiral staircases) excluding landing. |
| 13 | Suspended floors, roofs landings, shelves & their supports |
| 14 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing complete. B) Moorum |
| 15 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) All works upto plinth level |
| 16 | in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 17 | in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 18 | Reinforced cement concrete work in well steining excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½ :3 (1 cement: 1½ coarse sand: 3 graded granitic or basaltic aggreate 20mm nominal size |
| 19 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member |
| 20 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand). laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 21 | Half brick masonry in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg /cm2. b) Upto floor V level. |
| 22 | Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a) Pre-construction |
| 23 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 24 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 25 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 26 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 28 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 29 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 30 | Neat Cement punning |
| 31 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour andmaterials and including cost of initial treatmentof roof slab as follows. The injunction of dampproof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 32 | Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 33 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. (b) Wall Ceramic Glazed Tiles : 300 x 450 |
| 34 | Kotah stone slab flooring over 20 mm (average) thick base of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete |
| 35 | Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete. |
| 36 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 37 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. (b)Plain glass |
| 38 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.(a)Plain grill |
| 39 | Sinlgle colour Foam Core FRP ( Fiber Reinforceced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factoryi) S. S. Hinges 4” - 3 Nosii) S. S. Latch - 1 Noiii) Tower Bolt 5” - 2 Nosiv) Handle 5” - 2 Nos Shutter thickness a) 35mm |
| 40 | Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. c) 4” x 2 ½ |
| 41 | FRP (Fiber Reinforced Polymer) Frames) Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.C) 4\\" X 2 1/2 \\" |
| 42 | Melamine polishing on wood work (one or more coat) a) Glossy |
| 43 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. (b) Second class Indian teak wood |
| 44 | Providing and fixing M.S. door latch with screws etc. complete (a) 300 x 20 x 6 mm |
| 45 | Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete. |
| 46 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Fixed windows/ ventilators matching with 18 mm series shutters. (c ) Figured glass |
| 47 | Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required. (a) W.C. pan with white plastic seat and lid |
| 48 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. ( c) Flat back wash basin size 550 x 400mm with a pair of single 15 mm C.P. brass pillar taps. |
| 49 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 50 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (b) 600 x 20 mm size |
| 51 | Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw |
| 52 | Providing and fixing brass bib cock (heavy) of approved quality : ( c) 25 mm nominal bore . |
| 53 | Providing and fixing brass stop cock (heavy) of approved quality : ( c) 25 mm nominal bore . |
| 54 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : 25 mm nominal bore . |
| 55 | 50 mm nominal bore . |
| 56 | Providing and fixing non-return valve of approved quality : ( c) 40 mm nominal bore |
| 57 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: ((b) 37.5 cm (15”) length . |
| 58 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: (a) 100 mm diameter. |
| 59 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. ( c) 1000 lit. capacity |
| 60 | Providing & fixing in position hand rails in staircase, landing and the like with 2\\" dia G.I. pipe (light class) resting on 25 mm (1\\") size M.S. square bars of clear height 90cms placed at 30 cm c/c including making necessary hold fast fixture (25 mm square bars 22 cm long) embeded in staircase concrete for resting the M.S. vertical square bars with holding etc. as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete (measurement will be made along the running length of hand rail). |
| 61 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. (d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 62 | Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design. |
| 63 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: (a) 110 mm dia |
| 64 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : (a) 110mm Dia |
| 65 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 20 mm dia nominal outer dia pipes. |
| 66 | 32 mm dia nominal outer dia pipes. |
| 67 | Providing and fixing chromium plated brass handle with necessary screws etc. complete (a) 125 mm |
| 68 | Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.(b)200 x 10 mm |
| 69 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs,watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 70 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 71 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 72 | Supplying and fixing of Factory made Precast RCC slabs at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. Size 900 x 400 x 150 mm with steel reinforcement not less than 7.0 kgs per unit -30 T capacity |
| 73 | Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity |
| 74 | Supplying, Stacking and leveling of good earth (comprising of mixture in the proportion of 70 % of black garden soil and 30% of sand) at site including screening through sieve of 7.5mm and spreading and breaking of clods watering ramming compacting and rolling with 10 tonnes roller to give an leveling surface including transportation loading, unloading, royalty charges and diposal of surplus rubbish materials beyond 1 km as directed by the Engineer – in – Charge . |
| 75 | Construction of embankement with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300-2 as per MORTH specification 305 |
| 76 | Providing and fixing ball valve (brass) of approved quality : High pressure with P.V.C. floats including C.P. extension nipple:(a3)25mm nominal bore |
| 77 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (I) SCH-40(blue)/(white). 25mm outer dia. |
| 78 | 50mm outer dia. |
| 79 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm respectively. |
| 80 | Providing and erecting welded mesh fencing 6.00 m height with 8mm dia HYSD bars (SAIL, TATA. VIZAG,JSW Steel Ltd. ) spaced @20cms C/C and fixed with 75mm gap above ground level to vertical M.S. hollow section (SAIL,TATA. VIZAG, JSW ,APOLLO Steel Ltd.) of size 100 X100X6mm embedded in cement concrete block of 1:1.5:3 grade of size 450x450x1500mm at 2.25 m c/c with iron bar 16mm dia as hold fast including welding link with the frame using horizontal M.S. hollow section (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) of 50x50x4.5mm size , 4Nos. spaced at vertical equal distance in the grid including primer,3 coats of oil painting etc. complete as per drawing and as directed by the Engineer in charge. |
| 81 | Providing and erecting welded mesh fencing 2.00 m height with 8mm dia HYSD bars (SAIL, TATA. VIZAG,JSW Steel Ltd. ) spaced @20cms C/C and fixed with 75mm gap above ground level to vertical M.S. hollow section (SAIL,TATA. VIZAG, JSW ,APOLLO Steel Ltd.) of size 75x75x5mm embedded in cement concrete block of 1:1.5:3 grade of size 350x350x700mm at 2.25 m c/c with iron bar 16mm dia as hold fast including welding link with the frame using horizontal M.S. hollow section of 50x50x4.5mm size , 2Nos. placed at top & bottom in the grid including primer,3 coats of oil painting etc. complete as per drawing and as directed by the Engineer in charge. |
| 82 | Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality). |
| 83 | Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge |
| 84 | Providing and fixing R.P.V.C. vent cowl: (a) 110 mm dia |
| 85 | Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore. |
| 86 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards |
| 87 | Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge |
| 88 | Providing cuddapah stone benches (50cm wide and 45cm height) of 25 mm thick cuddapah slabs machine cut and polished on either side in partitions and also for the top slab, along with jet black mirror polish granite flooring on top 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) including making necessary grooves in the wall and fixing with cement mortar etc complete. |
| 89 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 90 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 91 | Providing & laying of minimun 70mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 and above grade made by heavy duty duty making machine with strong vibratory compaction and approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all completed as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant. Size: 210mm x 105mm x 70mm thick (Type: Rectangular Type Pavers) b) Other Colours |
| 92 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 93 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 94 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm (a) Jet Black |
| 95 | PVC false ceiling grid type : Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm Density Manufactured by an ISO-9000 certified Company, used as panel insert in a frame work made using anodized aluminum T- section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600x600mm). The aluminum frame work is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing |
| 96 | Supplying and laying of Burnt building bricks of class 75kg/m3 (Khanapur make) (wire cut bricks) for sub-grade prparation of turf cricket pitch. |
| 97 | Supplying and laying of Granatic/Basaltic aggregates for su-grade preparation of turf pitch. |
| 98 | Supplying and laying of tank silt in layers (Black and Red) for preparation of turf Cricket pitch including breaking up clods and screening through a required size screen etc. complete. |
| 99 | Providing and fixing well cover of Size 4.0 mt dia consisting of RHS 80x40x3.2mm main supports, angle L25x25x5mm and internal 12mm squre bars. As per drawing including providing and fixing holdfast embedded in cement concrete 1:2:4 including priming coat with ready mixed lead paint and painting two or more coats with superior quality ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 100 | Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge. A) 110 mm dia |
| 101 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group A -- with Cat A Modular Accessories |
| 102 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 103 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. (a) 5/6 A switch Cat A |
| 104 | (c) 15/16 A switch Cat A |
| 105 | (d) 3 pin 5/6 A socket outlet Cat A |
| 106 | (e) 6 pin 15/16 A socket outlet Cat A |
| 107 | Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required. (b) 4 Module ( 125 mm x 7 mm) Cat A |
| 108 | (c) 6 Module (200mm x 75 mm) Cat A |
| 109 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit). |
| 110 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 111 | (j) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit) |
| 112 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator). 6 way (8+18), double door, Horizontal type Cat A |
| 113 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A |
| 114 | (e) TPN, Cat A |
| 115 | Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. (a) Cat A |
| 116 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories suitable site down rod as per site reuirement etc. (a) Cat A |
| 117 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (a) Cat A |
| 118 | Supplying and erecting anodized aluminium light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angleof 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty aof make Wipro/Leksa/ Philips |
| 119 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having systemlumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of50,000 Hrs at L70B50 including driver, having mounting arrangement with boardfor surface type or spring loaded mounting clips complete with minimum 2 yearswarranty make Wipro/Leksa/ Philips |
| 120 | Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. |
| 121 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 50 sq.mm |
| 122 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 123 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required |
| 124 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 50 sq.mm |
| 125 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately). (a) In Soily strata |
| 126 | Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt) |
| 127 | Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 128 | Supplying and erecting integrated LED flood light fitting Max. 150W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty of make Leksa/Wipro/Philips |
| 129 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm |
| 130 | 4 Core 16 sq.mm |
| 131 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 132 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 133 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 4 x 6 Sq. mm. |
| 134 | (5) 4 x 16 Sq. mm. |
| 135 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm |
| 136 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required |
| 137 | Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender