Tender For Repair And Renovation Of Godown Named Salaulim At Sip Pajimol Complex In Survey No. 25/2, Uguem Village In Sanguem Constituency, Kushawati District.
Tender Value
13.58 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
11 days left
EMD
27178
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Godown Named Salaulim At Sip Pajimol Complex In Survey No. 25/2, Uguem Village In Sanguem Constituency, Kushawati District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead. |
| 2 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Leada. Of area 3 sq.m. and below |
| 3 | Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 5 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 6 | Providing and fixing Polycarbonate embossed dots profile roofing sheets of 0.5mm thickness of prospan or equivalent make complete as per the directions of the Engineer in charge. |
| 7 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 8 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in (a) All works upto plinth level |
| 9 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.d. Second class matti wood |
| 10 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 11 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 12 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 13 | Providing and fixing 38 mm thick battened and framed door shutters including bright finished or and black enamelled iron hinges with necessary screws.a.Second class Indian teak wood |
| 14 | Providing & fixing Two Track sliding window in economical section made out of 60mm x 45mm x 2.5mm Upvc multi cavity track section & Shutter made out of 57mm x 31mm x2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Economical) is 12.25 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 15 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.c.Figured glass |
| 16 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.a.Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps. |
| 17 | Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.a.Long pan pattern W. C. Pan |
| 18 | Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. : |
| 19 | Providing and Placing Septic Tank-1550 Litres capacity 1280 diameter and 1713 height, in black colour including fright charges as directed by Engineer in charge |
| 20 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (i) 110mm outer dia. |
| 21 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (e) 50mm outer dia. |
| 22 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (g) 75mm outer dia. |
| 23 | Providing and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 24 | Providing and fixing coloured ceramic tiles (Bell or equivalent) of 8\\" x 12\\" size and 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 25 | Painting two or more coats (excluding priming coat) with ordinary ready mixed paint of approved brand & manufacture in all shades except white or green on new work to give an even shade. |
| 26 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 27 | Distempering (one / more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade. |
| 28 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 29 | Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade. |
| 30 | Painting 1 coat with oil type wood preservative of approved brand & manufacture on old work. |
| 31 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 32 | Painting one or more coats of acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) on old work including cleaning the surface with water etc. complete. |
| 33 | Providing and fixing M.S. door latch with screws etc. completea.300 x 20 x 6 mm |
| 34 | Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. completea.250 x 10 mm |
| 35 | Providing and fixing M.S. handles with necessary screws etc. completea.125 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender