Tender For Repair And Renovation Of The Existing Store Room- Guleli At S.I.P. Pajimol Complex, Sanguem Kushawati- Goa
Tender Value
14.28 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
11 days left
EMD
28562
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of The Existing Store Room- Guleli At S.I.P. Pajimol Complex, Sanguem Kushawati- Goa
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead. |
| 2 | Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of 1 mt. of part thereof beyond 10 meters a) Sectional area 40 sq. cms. and above |
| 3 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 5 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead a) Doors (1.2*2.5) |
| 6 | b) Windows 1 (1*1.3) |
| 7 | b) Ventilator (1.1*0.55) |
| 8 | Dismantling rolling shutters, top covers and shafts etc. for replacement of springs ball bearing complete and refixing the shutter after replacement of springs and ball bearing (cost of replacement parts excluded) including all labour and returning the unserviceable parts to the department complete. |
| 9 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 11 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 12 | Providing and fixing Polycarbonate embossed dots profile roofing sheets of 0.5mm thickness of prospan make or equivalent including all the accessories excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 13 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 14 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level |
| 15 | External plaster :- 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 16 | Internal plaster :- 12mm cement plaster 1:3 (1 cement : 3 fine sand) |
| 17 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. D)Second class matti wood |
| 18 | Providing and fixing 38 mm thick battened and framed door shutters including bright finished or and black enamelled iron hinges with necessary screws. B) Nano or equivalent |
| 19 | Providing and fixing M.S. door latch with screws etc. complete a) 300 x 20 x 6 mm |
| 20 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring. |
| 21 | Providing Pre-cast cement concrete jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sills and soffits i) 50mm thick |
| 22 | Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 23 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 24 | Distempering (one / more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade. |
| 25 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 26 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 27 | Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work. |
| 28 | Painting two or more coats (excluding priming coat) with ordinary ready mixed paint of approved brand & manufacture in all shades except white or green on new work to give an even shade. |
| 29 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 30 | Painting one or more coats of acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) on old work including cleaning the surface with water etc. complete. |
| 31 | Providing and supplying flex board of size 6 ft X 3 ft including design and printing, M.S. frame fitting and installing at site, complete as per the directions of the Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender