Tender For Fitting & Fixing Of Fire Fighting System At Unit 1 Market, Bhubaneswar
Tender Value
6.36 Crore
Estimated cost
Bid Submission
03 Oct 2026
20 days left
EMD
6.36 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fitting & Fixing Of Fire Fighting System At Unit 1 Market, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | FIRE FIGHTING PUMPS & EQUIPMENTS:Providing, fixing, testing and commissioning of electric driven Hydrant Pump & Sprinkler pump suitable for automatic operation consisting of the following:(a) Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump(b) Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.(c) Common bed plate of fabricated mild steel channel or cast iron type.(d) Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required.The pump shall be of the following specifications:Discharge-2850 LPMHead-130MNo. of stage preferred- singleSpeed RPM-2900Material of constructiona) Impeller-Bronzeb) Casing-C.Ic) Shaft & Shaft Sleeve - SS-410d) Bearing- Grease lubicatede) Seal & Make-MechanicalType of pump-End Suction |
| 2 | Providing, fixing, testing and commissioning of electric driven Jockey Pump suitable for automatic operation consisting of the following:Horizontally mounted centrifugal end suction pump complete with mechanical seal and including necessary arrangement for testing of pump.Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and flexible coupling and coupling guard with the pump.Common bed plate of fabricated mild steel channel or cast iron type.Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required.The pump shall be of the following specifications:Discharge-180 LPMHead-130MNo. of stage preferred- singleSpeed RPM-2900Material of constructiona) Impeller-Bronzeb) Casing-C.Ic) Shaft & Shaft Sleeve - SS-410d) Bearing- Grease lubicatede) Seal & Make-MechanicalType of pump-End Suction |
| 3 | Providing, fixing, testing and commissioning of diesel engine Pump suitable for automatic operation consisting of the following:(a) Horizontal end suction centrifugal pump complete with mechanical seal and including necessary arrangement for testing of pump(b) Water coolled Diesel Engine developing suitable BHP at 1500 RPM for the Pump, common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance tree batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muttler, day oil tank of 400 Its with first charge and manual oil pump set.(c) Flexible coupling and coupling guard with the Pump,(d) Common bed plate of fabricated mild steel channel or cast iron type.(e) Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundationbolts, washers as required.(f)Engine panel(g) Sealed maintenance free batteries of 24 V, 88 AH(h) Exhaust pipe of required length with asbestos lagging, muffles(i) Day oil tank of 400 Its with first charge and manual oil pump set.The pump shall be of the following specifications:Discharge - 2850 IpmHead - 130 mNo. of stage preferred - SingleSpeed RPM - 1850Mover - Diesel engine drivenMaterial of constructiona) Impeller - Bronzeb) Casing - C.I.c) Shaft & Shaft Sleeve - SS-410d) Bearing - Grease Lubicatede) Seal & Make - MechanicalType of pump - End Suction |
| 4 | Providing, fixing, testing and commissioning Air Vessel for fire pumps as per following specifications:Diameter - 300mmShell thickness - 6mmDish ends - 6mmHeight - 1000mmFinishing- Two coats of Red enamel paint of first grade over one coat of primer externally & two coats of epoxy coating inside.Material of Construction - M.S.Test Pressure - 15 Kg./sq.cm. |
| 5 | Providing, fixing, testing and commissioning of non draw out Cubical type sectionalised floor standing powder coated switch board of 31 MVA fault capacity at 415 V +/- 10% complete with 4 strip, 800 A capacity Aluminium Bus - Bar Electrolytic grade, cable alley & supplying & fixing of following switchgears including connections & interconnections complete as required for 1 No Hydrant pump, 1 No Sprinkler pump,2 Nos. Jockey Pump, & 2 Nos. Engine Staking Panel for Diesel Pump. CUBICAL FIRE PANEL BOARD, i) For 1 x 110 KW Fire hydrant pump (motor rating as per pump design)ii) For 1 x 110 KW sprinkler pump (motor rating as per pump design)iii) For 2 x 9.3 KW Jockey Pump (motor rating as per pump manufacturer design) INCOMER1 no. 800 A TPN MCCB with Thermal Magnetic Release & ROH, with(0 -100 0 A) ammeter with 3 CT and selector switch, 96 mm (0 - 400 V) Voltmeter with selector switch, phase indication light with protection fuse-01 Set.OUTGOINGSi) For 1 x 110 KW Fire hydrant pump.400 A TP MCCB with Star delta starter, overload relay start / stop push buttons, (0-500 A)ammeter with three CT & selector switch, on / off / trip indication light with protection fuses, single phase preventer. - 2 Setsii) For 2 x 9.3 KW Jockey Pump63 A TP MCB with Dol staner, overload relay, start/stop push buttons, ammeter (0-100A) with three CT & selector switch, on/off/trip indication lights with protection fuse, single phase preventer.- 3 Setsiii) 32A MCB for battery charging alongwith engine start relay 24V DC with AMF Panel - 03 setsiv) Provision for starting the diesel engine fire pump with battery charger for trickle & boost charging. The diesel engine driven fire pump shall start automatically in the event of pressure dropbeyong preset limit on mains faulure or failure of electrical driven pumps to start.Note:- All earthing & interconnection LT Cabling with termination and glanding to incomer of panel are considered.Separate neutral link to be provided wherever TP MCCB are used.Following provisions to be made in the tire panel:Audio visual alarm & indications having disconnect / reset facility with a range of 1/2 km. Annunciator to be provided in the Fire panel with hooter and acknowledge, test and reset P Bs. The indication shall come on when electrical driven pump set fails to start on pressure drop orwhen there is power failure during pressure drop.Facility for mode selection ie auto or manual test & local/remote.Protection failure & control cabling.Panel shall be interlocked in such a way when fire pump starts on pressure drop in the header,supply to working chiller A/c panel is disconnected.Remote indication of ON/OFF/TRIP shall be provided through potential tree contact.Provision of remote starting/stopping (manuals) of the engine shall be made. NOTE :All pumps operation shall be controled by flow switches.The logic of control panel based on specification attached.All pumps shall be works automatically or manually.5 Amp power required for diesel engine pump from main tire lighting panel.(panel staner shall be based on pumps motor rating if any changes in motor rating the stanerrating shall change and fabrication shall start only after approval of drawing) |
| 6 | Providing, laying, jointing, testing, & commissioning with lugs & glanding the PVC insulated & sheathed FRLS (Flame Retardant Low Smoke) Armoured Cables of 1.1 K.V. Aluminium/copper Conductor including supplying andmaking end termination with brass compression glands: 3.5 Core 240 Sq.mm XLPE Aluminium Armoured Cable for Main Pump |
| 7 | 4 Core 35 Sq.mm PVC Copper Armoured Cable for Jockey Pump |
| 8 | 12 Core 2.5 Sq.mm PVC Copper Armoured Cable for Diesel Pump |
| 9 | 2 Core 1.5 Sq.mm PVC Copper Armoured Cable for Instrumentions |
| 10 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required50 mm dia |
| 11 | 80 mm dia |
| 12 | 100 mm dia |
| 13 | 150 mm dia |
| 14 | 200 mm dia (wall thickness 6 mm) |
| 15 | 250 mm dia (wall thickness 6 mm) |
| 16 | 300 mm dia (wall thickness 6 mm) |
| 17 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 18 | Providing, fixing, testing and commissioning fire retardent / extinguishing electrical insulated synthetic mat of 3mm thick +10% conforming to latest BIS doc no.-ET-02(5440) meeting requirements of IS 3043 / IS 5216 (Part I, II & III), IS 8437 & IEC 479 suitable for all voltages not exceeding 3.3 KV AC supply and having minimum width of 1000mm + 20mm and including supply of required quantity of adhsive / compound and fixing the same at site as per site requirement. |
| 19 | providing & fixing in position the industrial type Pressure Gauges with gun metal / brass valves complete as required |
| 20 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with rising spindle, C.I seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :80 mm dia |
| 21 | 100mm dia |
| 22 | 150 mm dia |
| 23 | 200 mm dia |
| 24 | 250 mm dia |
| 25 | 300 mm dia |
| 26 | Providing, installation, testing and commissioning of double flanged non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm dia |
| 27 | 150mm dia |
| 28 | 200mm dia |
| 29 | 300mm dia |
| 30 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm diaholes with stainless steel fl300 mm diaange. |
| 31 | Supply, Erection, Testing and Commissioning of Cast Iron Body Butterfly Isolation Valves with necessary fittings and accessories like flanges, GI bolts, nuts & washers, painting etc. The Valves shall be of Lever operated valves80 mm dia |
| 32 | 100 mm dia |
| 33 | 150 mm dia |
| 34 | 200 mm dia |
| 35 | 250 mm dia |
| 36 | 300 mm dia |
| 37 | Supply and Erection of following sizes GI Perforated type cable tray made out of 16G GI sheet folded to required shape with adequate number of supports. Rate shall be inclusive of suitable hanging support etc.400mm x 50mm |
| 38 | 300mm x 50mm |
| 39 | 150mm x 50mm |
| 40 | 100mm x 50mm |
| 41 | Supply, Erection, Testing and Commissioning of Gunmetal Ball valves with necessary fittings and accessories like flanges, GI bolts, nuts & washers, painting etc. 50 NB |
| 42 | 25 NB |
| 43 | Providing and fixing heavy duty floating flange EPDM rubber expansion joint with unit control as per manufactures specifications of standard length complete with all acessories and a working pressure not less than 16 kg/sqcm including rubber gaskets, flanges, nuts, bolts & washers complete as required.80mm dia |
| 44 | 100mm dia |
| 45 | 200mm dia |
| 46 | 250mm dia |
| 47 | Providing & fixing Puddle Flanged including 1 mtr long GI heavy pipe piece welded / threaded with G.I plates 450x450x6mm thick with both end screwed / flanged.For 80 mm dia pipe |
| 48 | For 100 mm dia pipe |
| 49 | for 150 mm dia pipe |
| 50 | for 300 mm dia pipe |
| 51 | FIRE HYDRANT SYSTEMProviding laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete asrequired.150 mm dia pipe |
| 52 | 100 mm dia pipe |
| 53 | 80 mm dia pipe |
| 54 | 50 mm dia pipe |
| 55 | 25 mm dia pipe |
| 56 | Under Ground piping - Supply, Erection, Testing and Commissioning of Mild Steel (MS) pipes Heavy class of the following diameters and all necessary supports. Rate shall be inclusive of wrapping of 4mm thick Anti-corrosive Coating & Wrapping Materials manufactured as per IS:10221 and Excavation of earth and refilling with and 300 mm above and below of pipe then with earth consolidation compaction upto formed ground level.200 NB |
| 57 | 150 NB |
| 58 | 100 NB |
| 59 | 80 NB |
| 60 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal |
| 61 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and femalecouplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Gunmetal |
| 62 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m |
| 63 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diametersize nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as requiredGun metal |
| 64 | Providing, fixing, testing & commissioning of fire hose cabinet fabricated from 16 gauge M.S.sheet with locking arrangement and hanging arrangement for accessories painted \\"Fire Red\\" with Stove enameled paint \\"Fire Hose\\" written on front including suitable supports to place 900 mm above ground level properly anchored, approximately size 750x650x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe with nozzle for external hydrants) |
| 65 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with rising spindle, C.I seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :80 mm dia |
| 66 | 100 mm dia |
| 67 | 150 mm dia |
| 68 | Providing, installation, testing and commissioning of double flanged non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150 mm dia |
| 69 | Providing, fixing, testing & commissioning of 25 mm dia screwed inlet forged brass single acting air release valves connected with ball valve on inlet side at top of the Risers. |
| 70 | Providing and fixing in position the industrial type Pressure Gauges with gun metal / brass valves complete as required |
| 71 | Providing, fixing, testing & commissioning of standard Fireman's Axe with heavy insulated rubberhandle. |
| 72 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 3O4) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reducepressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 73 | Providing,fixing ,testing & commissioning of suction coupling for fire brigade drawl of water from tank with 150 mm dia GI (Heavy class) pipe and foot valve (Pipe max 8 M long). |
| 74 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :4 way - 150 mm dia M.S. Pipe |
| 75 | Supply, Erection, Testing and Commissioning of Gunmetal Ball valves with necessary fittings and accessories like flanges, GI bolts, nuts & washers, painting etc. 50 NB |
| 76 | 25 NB |
| 77 | Supply, erection, testing & commissioning of Water moniter with necessary fittings and accessories like flanges, GI bolts, nuts & washers, painting etc. 150mm |
| 78 | SPRINKLER SYSTEMProviding, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two ormore coats of synthetic enamel paint of required shade complete as required25 mm dia |
| 79 | 32 mm dia |
| 80 | Under Ground piping - Supply, Erection, Testing and Commissioning of Mild Steel (MS) pipes Heavy class of the following diameters and all necessary supports. Rate shall be inclusive of wrapping of 4mm thick Anti-corrosive Coating & Wrapping Materials manufactured as per IS:10221 and Excavation of earth and refilling with and 300 mm above and below of pipe then with earth consolidation compaction upto formed ground level.200 NB |
| 81 | 150 NB |
| 82 | 100 NB |
| 83 | 80 NB |
| 84 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size,flanges, orifice plate, gasket etc of tollwing sizes as required :200mm dia |
| 85 | Providing, fixing in position the industrial type Pressure Gauges with gun metal / brass valves complete as required |
| 86 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. Pendent Sprinkler |
| 87 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.1500mm |
| 88 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.150mm dia |
| 89 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with rising spindle, C.I seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :80 mm dia |
| 90 | 100 mm dia |
| 91 | 150 mm dia |
| 92 | Providing, fixing, testing & commissioning of 25 mm dia screwed inlet forged brass single acting air release valves connected with ball valve on inlet side at top of the Risers. |
| 93 | Providing, fixing, testing & commissioning of 25 mm dia preassembled inspection & testing assembly with gun metal Gate valve, gun metal sight glass, drain valve all complete. |
| 94 | Supply, Erection, Testing and Commissioning of Gunmetal Ball valves with necessary fittings and accessories like flanges, GI bolts, nuts & washers, painting etc. 50 NB |
| 95 | 32 NB |
| 96 | 25 NB |
| 97 | FIRE EXTINGUISHERSProviding, installation, testing and commissioning of ABC type fire extinguishers consisting of welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets complete with internal charge with stand.Capacity 6 kg. I.S.I. Marked. |
| 98 | Providing, installation, testing and commissioning of Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body, squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.Capacity 4.5 kg. I.S.I. Marked. |
| 99 | Capacity 6.5 kg. I.S.I. Marked. |
| 100 | Providing, installation, testing and commissioning of Mechanical Foam type(ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked as per IS 933 finished externally with red enamel paint and fixed to wall with brackets complete withinternal charger.Capacity 9 litres I.S.I. Marked. |
| 101 | Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Capacity 22.5 kg. |
| 102 | WALL MOUNTED/FLOOR MOUNTED FIRE EXTINGUISHERProviding, fixing, testing & commissioning of 4 Nos of Sand Bucket ISI Marked to IS:2546 capacity10 Itrs. with stand. |
| 103 | FIRE ALARM SYSTEMSupplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.4 Loop Panel |
| 104 | Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. |
| 105 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 106 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. |
| 107 | Intelligent and electronically addressable photoelectric smoke detector with microprocessor in head and including mounting base with LED etc. complete as per specification |
| 108 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. |
| 109 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 110 | Supplying and drawing of 2 X 1.5 Sq mm copper Armd Cable with cable glands, saddle, screw etc complete as required. |
| 111 | Supplying and fixing of following sizes of Heavy duty FRLS PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 112 | 32 mm |
| 113 | SIGNAGE SYSTEMProviding AUTOGLOW Signages in Block / SmallLetters of Specified Sizes:Emergency exit size: 4\\" X 12\\"Fire Alarm Call Point: 4\\" X 12\\"For Fire hydrant(4'' X12'')Fire Extinguisher: 8\\" x 4\\" |
| 114 | Year 2 Maintenance |
| 115 | Year 3 Maintenance |
| 116 | Year 4 Maintenance |
| 117 | Year 5 Maintenance Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender