Tender For Regular Repair & Maintenance Of Road In Ward No. 14, 16, 20, 21 & 26
Tender Value
63.25 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
1 days left
EMD
63300
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Regular Repair & Maintenance Of Road In Ward No. 14, 16, 20, 21 & 26
BOQ
| Sl. No. | Item Description |
| 1 | PAVER ROAD: Labour for Removal of Cement Concrete Paver Blocks of different thickness & size/shape made by manually over 50 mm thick Compacted bed of coarse sand, and remove the sand 1 from the surface and stacking for reuse etc, all complete as Per Driection of Engg -In-Charge etc. complete. |
| 2 | Earth work in ordinary soil including rough dressing and levelling the bed. |
| 3 | Filling F&P with sand well watered and rammed. |
| 4 | CC (1:4:8) using 4 cm size H.G metal (C.B) including the cost of all materials, labour etc complete. |
| 5 | Relaying of old removed Factory made Chamfered edge Cement Concrete Paver Billocks of required strength, thickness & size/shape made by table Vibratory method, to attain superior smoth finish using PU or Equivalent moulds, Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand, copmacting and proper embedding / laying interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and direction of Engg -In-Charge. 80mmm thick C.C. Paver Blocks of M-40 grade With approved colour design Pattern etc. complete. (Without cost of Paver) |
| 6 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shape made by table Vibratory method, to attain superior smoth finish using PU or Equivalent moulds, Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand, copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In-Charge. 80mmm thick C.C. Paver Blocks of M-40 grade With approved colour design Pattern etc. complete. |
| 7 | C.C. work of M25 grade with 20 mm down graded chips (C.B.) including hoisting & laying |
| 8 | Carriage of Excavated earth by mechanical means within 5 km lead including loading and 8 unloading with all cost conveyance T & P sundries etc complete as per direction of Engineer-in-charge. |
| 9 | CC ROAD:Dismantlling and removing cement concrete including stacking the useful materials for re-use 1 and removing the debries within 50mtr lead, and as per direction of E-I-C |
| 10 | Filling F&P with sand well watered and rammed. |
| 11 | C:C: (1:4:8) using 4 cm. size H.G. metal (C.B) including the cost of all materials, labour etc complete. |
| 12 | C.C. work of M25 grade with 20 mm down graded chips (C.B.) including hoisting & laying |
| 13 | Carriage of Excavated earth by mechanical means within 5 km lead including loading and 5 unloading with all cost conveyance T & P sundries etc complete as per direction of Engineer-in-charge. |
| 14 | BT ROAD: Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60Kg/M2 using mechanical means as per clause 502 of MoSRT&H specification for road & bridge work (4th revision) (Data for 3500M2) |
| 15 | Labour for spreading dust and consolidation with H.R.R including watering and including the 2 cost & conveyance of dust. (Data for 2.83 Cum) |
| 16 | Providind and laying \\"BITUMINOUS MACADAM\\" with hot mix plant using crushed aggregates of specified grading premixed with Bituminous binder of 60/70 penetration grade of bitumen transportred to site laid over a previously prepared surface with a hydrostatic paver finisher with mechanical control to the required grade level and alignment and rolling with smooth wheeled vibrating and tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for Road & Bridge works. Data for 205 Cum (450 Tonne) |
| 17 | Providing laying, spreading and compacting graded stone aggregate to \\"WET MIX MACADAM\\" specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base /base course on well prepared surface and compacting with vibratory roller to achive the desired density as per Clause 406 of MoSRT&H specification for road and bridge works (4th Revision). |
| 18 | Labour for scrapping, cleaning the road surface applying tack coat using 3.00 Kg of bitumen for 10M2 and laying 75 mm. thick built up spray grouting in two layers 37.50 mm. thick each layer using 0.45 Cum of 25 mm. to 40 mm. size hard grauite metal and 12.00 kg penetration grade of bitumen for 10.00M2 in each layer with 0.12 Cum of 12 mm. chips as key stone for 10M2 spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with P.R.R. including hire and running charges of P.R.R and all other machineries but including costs and conveyance of bitumen metal and chips as per specification and direction of Engineer-in-charge. (Data for 5889M2) |
| 19 | Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen transporting the hot mix to work site laying with a hydro static paver finisher with mechanical control to the required grade, level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MosRT&H specification for road and bridge work. |
| 20 | Labour for surface dressing with 12kg penetration grade bitumen and 0.15 cum of 19mm 7 nominal size chips for 10M2 and rolling with P.R.R. and including the cost conveyance & royality of chips & cost of maxphalt. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender