Tender For Nh 217 To Bhaliapada Road_Road_Pot Hole Repair,Bush Cutting,Flank Dressing_0.000 To 1.400
Tender Value
5.03 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
1 days left
EMD
5040
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nh 217 To Bhaliapada Road_Road_Pot Hole Repair,Bush Cutting,Flank Dressing_0.000 To 1.400
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegitation,grass,bushes,shurbs,saplings and trees grith up to 300 mm,removal of stumps of trees cut erlier and disposal of unsreviceable materials |
| 2 | Construction of Embankment with approved materials obtained from borrow pits with all lead and lifts,tranporting to site by mechanical means within a lead of 5 Km speading,grading to required slope compacting of table 300-2 & Clause 305 of MoRT & H Specification for Road & Bridge works(4th Revision) |
| 3 | Providing,laying,spreading & compacting stone aggregate using IRC Gr-III size Granite metal WBM specification including spreading in uniform specification,thikness,hand packing,Rolling with Three roller 8-10 ton in stages to proper grade & camber, applying & Brooming requsite type of sreening binding material as crusher dust to fill up the interstices of coarse aggregate, Watering & compacting to the required desnsity as for clause 404 of MoSRT & H specification |
| 4 | Providing and Primer coat with bitumen Emulsion(S.S-1)using emulsion pressure distributer at the rate of 0.60 kg per Sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRTH specification CL-503. |
| 5 | Providing and applying tack coat with bitumen emulsion(R.S-1) over prepared surface of granular base including cleaning of road surface using emulsion pressure distributer at the rate of 0.30 kg per Sqm with cost, conveyance, royalty, taxes and machineries required for the work complete as per specification and direction of the Engineer-in-Charge |
| 6 | Providing, laying and rolling of Open Graded Pre-Mix Carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates using bitumen or emulsion(MS)(Cold Mix) @ 21.5kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant and rolling with a three wheel 80-100KN Static Roller Capacity, finished to required level and grades to be followed by premix seal coat as per Technical Specification Clause 508.2 of MORD and as per direction of Engineer-in-charge. |
| 7 | Providing, laying and rolling of Premix Seal Coat of 6.7mm size chips using Slow Setting Emulsion(Cold Mix) @ 11kg/10sqm to fill up voids of premix carpet including mixing in a suitable hot mix plant & rolling with a three wheel 80-100KN Static Roller Capacity, finished to required level as per Technical Specification Clause 510 of MORD . |
| 8 | Maintenance of road sinage |
| 9 | Clearing vents of CD works & restoration of CD works HPC (OLD & NEW) |
| 10 | Cement Concrete(1:3:6) with 4cm size hard granite metal including cost,conveyance and royality of material etc complete. (a)Berm CC |
| 11 | White wasing two coats |
| 12 | Construction of RCC guard posts of 250 mm dia M15 grade cast-in-situ with 20mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 (Precasted) |
| 13 | Providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 Sqm. as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MORD technical Specification Clause 300,800,1700 as per direction of the Engineer in charge (Inter mediate Board) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender