Tender For Rrd Of Various Under Jal Shakti Sub Division Chandol Tehsil Rajgarh Distt. Sirmour Under Pdna (Sh:- Construction of Reinforced Cement Concrete Intake Chamber, Construction of Reinforced Cement Concrete Staorage Tank Of Various Capacity, Co
Tender Value
42.39 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
4 days left
EMD
84800
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rrd Of Various Under Jal Shakti Sub Division Chandol Tehsil Rajgarh Distt. Sirmour Under Pdna (Sh:- Construction of Reinforced Cement Concrete Intake Chamber, Construction of Reinforced Cement Concrete Staorage Tank Of Various Capacity, Construction of Sedimentation Tank Of Various Capacity & Construction of & Jacketing Of Filter Bed Of Different Capacity At Various Water Supply Scheme Under Jal Shakti Sub Division Chandol Under Division Rajgarh) Eastimated Cost:- 4239000/- Earnest Money:- 84800/- Time:- 6 Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work in all classifications of soil such as spade work ,pick work, jumper work Kankar, moorum, shingles incliuding deccomposed soft and hard rock etc up to all heights stacking the excavated earth not more then 3 metres clear from the edge of excavation and then returning the stacked soil in15cm layers when required, into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts and carriage of all materials upto all leads and lifts. |
| 2 | Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts and carriage of all materials upto all leads and lifts. |
| 3 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to giv a fair finish including centring. shuttering. strutting and propping etc with wooden battens and ballies. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 4 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc.upto 200mm in thickness |
| 5 | Vertical surfaces such as walls(any thickness,) partitions and like including attached pillaster butresses plinth and string courses and the like and as per the the direction of Engineer-in-Charge. Including entire carriage of materail up to all leads and lifts. |
| 6 | P/L cement concrete work 1:1.5:3 (1cement:1.5sand :3 graded stone aggregate 20mm nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- |
| 7 | Foundation and plinth including entire carriage of material up to all leads and lifts |
| 8 | Walls (any thickness but not less than 0.1 M thickness) attached pillasters butteresses plingth and string courses etc. from top of foundation level up to floor two level and as per the direction of Engineer-in-Charge including entire carriage of material up to all leads and lifts. |
| 9 | Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 water borne aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing shelve and their supports balconies beams, girders bressumers and centilevers upto floor two level in all heights and depths including all leads and lifts carriage of material at site and as per directed by the Engineer-in-Charge. |
| 10 | Providing tor steel reinforcement for RCC work including bending, binding and placing in positon complete upto floor two level including all leads and lifts carriage of material at site and as per directed by the Engineer-in-Charge. |
| 11 | Providing and fixing MS Sheet man hole cover of 600 x 600mm to existing storage tank made of angle iron 40mm x 4mm base plate and manhole frame 35mm x 35mm x 4mm with MS sheet 2mm thick including cutting welding, red leads paint and locking arrangement with lock complete including all leads and lifts carrige of material at site and as per the directed by the Engineeer-in-Charge |
| 12 | Providing and fixing 25 mm dia GMS pipe (light Grade) in scour pipe and overflow inlet and outlet complete includign all leads and carriage of material at site and as per the direction of Engineer incharge |
| 13 | Providing and fixing 50 mm dia GMS pipe (light Grade) in scour pipe and overflow inlet and outlet complete includign all leads and carriage of material at site and as per the direction of Engineer incharge |
| 14 | Providing and fixing 80 mm dia GMS pipe (light Grade) in scour pipe and overflow inlet and outlet complete includign all leads and carriage of material at site and as per the direction of Engineer incharge |
| 15 | Steel work welded in built up sections, trusses, framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in gratings, framed guard bars, ladders railling, brackets and similar works with all leads and lifts. |
| 16 | Providing and Fixing 200 mm wide C.I rungs with chequered of rubber of non slip surface including fixing in tank with 200x200 mm C.C 1:3:6 (1Cement 3 Sand 6 graded stone aggrigate of 20 mm nominal size |
| 17 | Providing and placing in horizontal layer filtering media duly graded, screen, washed, and claened as specified by the Engineer in Charge including all leads and lifts and carriage of materiail at site and as directed by the Engineer incharge |
| 18 | i) Top ayer:- fine sand:- (Eff size of 0.20 0.40 and uniformily coefficient 2.00 to 3.00) |
| 19 | ii) Second Layer:- Course sand 3mm to 6mm |
| 20 | iii) Third Layer Bajri 6mm to 20 mm |
| 21 | iv) Forth Layer:- Bajri 20 mm to 25 mm |
| 22 | v) Bottom layer Broken stone 50mm to 75mm |
| 23 | Providing, Laying of Brick layer in cm 1:3 in inner drain |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender