Tender For Restoration Of Rain Damages Various Lwss/Tube Wells Under Sub-Division Jawali Section Bharmar & Jawali In Tehsil Jawali Distt Kangra (H.P.) (Sh:- Providing, Laying, Jointing And Testing Of Gi Pipe Line For 100Mm Dia (M), Rd 0 To 292 Rmt At
Tender Value
1.82 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
5 days left
EMD
3649
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Various Lwss/Tube Wells Under Sub-Division Jawali Section Bharmar & Jawali In Tehsil Jawali Distt Kangra (H.P.) (Sh:- Providing, Laying, Jointing And Testing Of Gi Pipe Line For 100Mm Dia (M), Rd 0 To 292 Rmt At Tubewell Tihal Near Dehri College And Providing And Fixing Ci Sluice Valve 100Mm Dia Tubewell Matlahar And 65Mm Dia Tubewell Darkati And Installation Of Internal Wiring, Street Light Etc. In Pump House At Water Supply Scheme Sidhpurghar (Batua)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer -in-charge in all leads and lifts. |
| 2 | Laying, jointing & testing in trenches to be levelled to grades, BIS marked GI pipes conforming to BIS:1239 ( latest with up to date amendments ) of following dia (Medium class PE) duly flanged after every 5th pipe with intermediate butt welded joints including the cost of flanges, bends of required degree, tee/ short pieces made from parent tubes of different degrees cutting , welding & jointing with flanges conforming to table as specified below of BIS:6392 ( latest with up date ammendments ) three layers (two layer out sides and one layer inner side) welded as per BIS:816 ( latest with up date ammendments ) with electrodes conforming to BIS 814 (latest with up date ammendments ) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4 mm thick ( Champion make ) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments ) & approved specification as per site conditions including flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge. (The earth work will be measured & paid separately) |
| 3 | 100mm dia (M) PE |
| 4 | Providing and fixing of Cast Iron Sluice valve of following dia ISI marked made Kirlosker PN 1.6 conforming to IS (14846-2000) latest with up to date ammendements, both side flanged T-17 including cutting, welding, gasket sheet 3mm thick champion make nut, bolt complete in all respects with in all lead and lifts as per direction & satisfaction of Engineer - in - charge. |
| 5 | 100mm dia |
| 6 | 65mm dia |
| 7 | Manufacturing, supplying and fixing of following dia double flanges bend of required degree including providing and fixing of M.S. Flanges of Table-5 including the cost of welding, rubber sheet nuts and bolts complete in all respect as per entire satisfaction of Engineer in charge. |
| 8 | 100mm dia |
| 9 | Wiring for light point/exhaust fan point/callbell point with 1.50 sqmt PVC insulated PVC sheathed copper conductor cable in surface/recessed PVC conduit as required. |
| 10 | Wiring for light/power plug wiring with 1x4 sqmt PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 2x2.24 mm Dia.bore copper wire for loop earthing as required. |
| 11 | 2x1.50 |
| 12 | 2x2.50 |
| 13 | Supplying and fixing metal box of 80 mmx 100 mm x60 mm deep(normal size) on surface or in recessed with suitble size pharolic laminated sheet cover in the front including P/F. 3 pin 16/16 ampere socket outlet and 15/16 amp.Tumbler /piano type switch connection,painting as required(For power plug) |
| 14 | Providing fixing testing and comissioning of ceiling fan 1200 mm(category - A ) and regulator including wiring of the down rod of standard length (up to 30 cm) with 1.5 sqmm PVC insulated copper conductor single core cable etc. as required complete in all respects as per direction and satisfaction of engineer in charge complete in all respects. |
| 15 | Providing and fixing LED Fluorescent box type (Monochromatic Light) 24 watt Philips/ Havells/ Bajaj/ Eveready/ Ujala/Luminous or any other ISI company make complete in all respect as per entire satisfaction of Engineer in charge. |
| 16 | Providing and fixing LED street lights 40 watt 110-220 V with complete fixtures including cost of providing and commissioning of electric wire as per required length ISI approved, Flexible pipe to cover the electric wire Havells/L&T/Philips/Syska make and making connection to existing electric syestem as per entire satisfaction of Engineer in charge. |
| 17 | Providing and fixing holder for bulbs Anchor/Havells/Syska make complete in all respect as per entire satisfaction of Engineer in charge. |
| 18 | Providing installation and commissioning and testing of of LED bulbs 20 watts fittings including 90 degree GI bend choke reflector of Bajaj /crompton /Greaves make complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 19 | Providing and fixing round electrical holder sheet complete in all respect as per entire satisfaction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender