Tender For Providing Boundary Wall Fencing Around Remaining Part Of Temple No 2 And Repurposing Old Railway Wagons For Childrens Recreational Use At Fort At Ramnagar Or Ahichachhatra, Aonla, Bareilly. (U.P.)
Tender Value
94.77 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
19 days left
EMD
2.84 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Boundary Wall Fencing Around Remaining Part Of Temple No 2 And Repurposing Old Railway Wagons For Childrens Recreational Use At Fort At Ramnagar Or Ahichachhatra, Aonla, Bareilly. (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | ITEMS TO BE EXECUTED |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in excavation by manually Very Carefully and without damaging Underneath Structure (if any ) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m |
| 4 | Providing and laying cement concrete in foundation /Base 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) of specified grade excluding the cost of centering and shuttering . |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zoneIII) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources |
| 7 | Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 9 | Pointing the joints of ancient brick masonry in lime mortar 1:1:1 (1 U/Lime ,1 Surkhi , 1 C.Sand) mixed with adhesive material including washing & cleaning of joints with cartages of material 200mtr lead etc complete |
| 10 | Providing and fixing of MS grill panel 1.80 m length and 1.35 m height having MS angle Iron frame ( 50mmx50mmx6mm) with 16 mm square bar having 15 cm spikes10 cm c/c spacing trishul shape spikes both side including all etc |
| 11 | Providing and laying in position cement concrete of specified grade (a) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 13 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 14 | Providing tile brick on edge pathway with composite mortar 1:4 (1 cement : 4 coarse sand) Over a bed of 20 mm thick mortar including filling the joints 10 cm depth etc. complete. |
| 15 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 300 mm dia. R.C.C. pipe |
| 16 | Demolishing brick work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 17 | Providing and fixing of MS frame jali 1.50 m length and 1.20 m height having MS angle Iron frame size ( 40mmx40mmx6mm) with 6 mm jali with 8.34 mm Hole including all etc |
| 18 | Providing and fixing MS gate double panel of size (3.00X2.0 m) with angle iron frame 50x50x6mm with MS 16 mm sq bar piercing through holes @10cm c/c with MS Channel 150x 75x5.7 mm and pointed at the top including hanging and locking arrangement all complete including cutting, hoisting, fixing in position with all necessary bolts etc |
| 19 | Providing and fixing MS gate double panel of size (6.00X2.0 m) with angle iron frame 50x50x6mm with MS 16 mm sq bar piercing through holes @10cm c/c with MS Channel 150x 75x5.7 mm and pointed at the top including hanging and locking arrangement all complete including cutting, hoisting, fixing in position with all necessary bolts etc |
| 20 | Cement plaster 12 mm thick with mortar 1:4 (1 cement: 4 coarse sand). |
| 21 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 22 | Reparing of Old Railway Wagons all complete including cutting, hoisting, fixing in position with all necessary bolts etc. |
| 23 | Providing and fixing MS gate double panel of size (4.00X2.0 m) with angle iron frame 50x50x6mm with MS 16 mm sq bar piercing through holes @10cm c/c with ISMS 250MMx 125MMx6.90MM |
| 24 | Providing and fixing of MS frame jali 1.50 m length and 0.90 m height having MS angle Iron frame size ( 40mmx40mmx6mm) with 6 mm jali with 8.34 mm Hole including all etc |
| 25 | Shifting of Old Railway Wagons & rails during the execution of work and replacing of the same after execution . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender