Tender For Special Repair To Common Toilets In Kv School At Afs Jaisalmer
Tender Value
23.21 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
4 days left
EMD
46425
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Common Toilets In Kv School At Afs Jaisalmer
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully aluminium point wiring on wooden battens/through conduit (light, fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/floors etc complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L for concealed point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non-metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed.One light point controlled by one, one-way switch. |
| 3 | All as per Item No. 2.00 here-in-before but one fan/exhaust fan point controlled by one, one-way switch. |
| 4 | All as per Item No. 2.00 here-in-before but one socket outlet 3 Pin, 6 Amp on independent board. |
| 5 | All as per Item No. 2.00 here-in-before but one socket outlet 3 Pin, 6 Amp on same board. |
| 6 | M&L for point wiring controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 4 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLSH copper conductor cable of 4 Sqmm with green insulation as earth dolly for 6 Pin, 16 Amp socket outlet on independent board complete all as specified and directed. |
| 7 | S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and as directed. |
| 8 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and as directed. |
| 9 | Supply & fix in repair single pole and neutral enclosure 2 module in sheet steel with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA complete all as specified and directed. |
| 10 | S&F socket outlet 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and as directed. |
| 11 | S&F socket outlet 2 in 1, 3 pin 15 Amp flush type (ISI Marked) complete all as specified and as directed. |
| 12 | M&L for ceiling rose, surface Bakelite 65 × 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked) complete all as specified and as directed. |
| 13 | Taking down of old existing unserviceable submain wiring of any rating complete all as specified and as directed. |
| 14 | M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 4.00 Sq mm 1100 volts grade including one 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through PVC casing capping/conduit incl complete all as specified and as directed.Note: Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit. |
| 15 | Supply and fixing Surface and wall mounted LED tube light fittings of cap 20W, four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing including taking down complete all as specified and as directed. |
| 16 | Taking down carefully unserviceable DB's including MCB's complete of any size and capacity complete all as specified and as directed. |
| 17 | Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral including taking down complete all as specified and as directed by Engineer-in-Charge. |
| 18 | S & F MCB, 6 to 32 Amp, SP, 240 Volt, complete all as specified and directed. |
| 19 | S&F MCB, 32 Amp, SPN, 240 Volt complete all as specified and directed. |
| 20 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm × 60 cm × 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed.(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.(ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip. Any variation in length shall be adjusted through deviation order.(iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. |
| 21 | Supply and fix exhaust fan, Heavy duty steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 22 | Taking down door chowkats or frames exc.1.5 sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed. |
| 23 | Taking down chowkats or frames n. exc.1.5sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed. |
| 24 | M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of watertanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed. |
| 25 | S&F 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 26 | S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames & shutters of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard / appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge. |
| 27 | S&F for expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer - in- charge. |
| 28 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed. |
| 29 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each panes fixed any bldg hight complete all as specified and directed. |
| 30 | S&F Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed. |
| 31 | S&F 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed. |
| 32 | S&F 200 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 33 | S&F 300MM Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 34 | S&F aluminum anodized handle cast type 150mm size complete all as specified and as directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 36 | M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 37 | M&L for (300mm x450mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in dado etc over and including 15mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 38 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors, aprons etc. complete all as specified and directed. |
| 39 | M&L for 20 mm thick Granite platforms and like in 15 mm thick cement morter (1:6) screed bed including pointing in match cement (1:2) using Marble dust with admixture of pigment to match with shade of Granite including cutting/polishing to accommodate counter basin & polishing to edges complete all as specified and directed. |
| 40 | Taking up or down steel tubing and connections 15mm bore complete all as specified and directed |
| 41 | Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 42 | Taking up or down steel tubing and connections 25mm bore complete all as specified and directed. |
| 43 | Supplying and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | Supplying and laying of CPVC pipes 25mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 45 | S&F steel water tubing `medium grade’ galvanized 25 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed. |
| 46 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall complete all as specified and directed. |
| 47 | S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 48 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I including disconnecting/ dismantling of existing tank complete all as specified and directed. |
| 49 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 50 | M&L for Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfacces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 51 | M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed. |
| 52 | M&L for prepration of old decorated plastered surfaces of walls finished with white putty by washing down and stoping and applying one coat of oil bound distemper white or tinted complete all as specified and directed. |
| 53 | M & L for prepariation of old treated surfaces and applying one coats of white wash on surfaces of ceiling complete all as specified and directed. |
| 54 | M&L for two coat of oil bound distempering on newly plastered wall surfaces over a coat of primer finished even and smooth complete all as specified and directed. |
| 55 | M&L for preparing of new plastered sufarce of ceiling and applying three coats of white wash complete all as specified and directed. |
| 56 | M&L for prepration of old painted wooden surface of any description not other wise described exc 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 57 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed. |
| 58 | M&L for prepration of old painted steel surface of any description not other wise described exc 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 59 | M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed. |
| 60 | S&F in repair water closet vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest front/back inlet (excluding flushing cistern and flush pipe) including provision of cement concrete bedding in PCC (1:5:10) type E2 and making good to disturb surface complete all as specified and directed. |
| 61 | S&F in repairs Vitreous china wash down Single piece water closet pan for kids (510x295x520)(pedestal pattern) with 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.Make : CERA-S1013130 or techno commercially equivalent as approved by GE. |
| 62 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 63 | S&F in repairs Vitreous china wash basin with full Pedestal white flat back size 575 x 460 x 180mm incl waste pipe chain plug brackets complete all as specified and directed.Make : Cat No S2040163 (Wash Basin) & Cat No S2090107 (Full Pedestal) or techno commercially equivalent as approved by GE. |
| 64 | S&F in repairs under counter wash basin of size (560x450) mm white colour excluding taps, complete all as specified and as directed. Make : ZEN-10049 or techno commercially equivalent as approved by GE. |
| 65 | S&F in repairs Vitreous china squatting plate urinal(470X360X100)MM, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. Make : CERA-S4040101 or techno commercially equivalent as approved by GE. |
| 66 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugh bedding Urinal against wall in CM 1:2 securing Urinal to plug with and including 60 mm long brass screw pointing around urinal back in cement etc complete all as specified and directed. |
| 67 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exc 50 m from site complete all as specified and directed. |
| 68 | S&F Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, 50-65mm thk, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed. |
| 69 | M & L reinforced Cement concrete in 1:2:4 type B1 using 20mm graded aggregate as in wash basin counter slab supported on wall etc complete all as specified and directed. |
| 70 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 71 | M&L for Use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking plateform and similar work not exc. 200 mm thick complete all as specified and directed. |
| 72 | S&F in repairs low level flushing cistern 10 ltrs capacity, valveless, syphonic action type with inlet, ball valve, float and handle, body moulded from virgin quality high impact poly propoliyone including brackets and 32 mm dia PVC flush pipe for low level flush cistern complete all as specified and directed. |
| 73 | S & F in repair 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 74 | S&F in repairs stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 75 | S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 76 | S&F in repair chromium plated health faucet 15 mm dia screwed down high pressure 1.8 mtr tube & hook complete all as specified and directed.Make - Jaguar Code-ALD CHR 583 or techno commercially equivalent as approved by GE. |
| 77 | S & F in repair brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and directed. |
| 78 | S & F in repairs 15 mm bore Fancy type swan neck pillar tap cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 79 | S&F in repairs 8mm thick high quality looking mirror of area not exceeding 3.0 sqm with fancy type beading fixed to wall with chromium plated screw complete all as specified and directed. |
| 80 | S & F in repair PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm complete all as specified and directed. |
| 81 | S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 82 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and directed. |
| 83 | S&F in repair 110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door complete all as specified and directed. |
| 84 | S&F in repair 110mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 85 | S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and directed. |
| 86 | S&F in repair 75mm dia PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 87 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe complete all as specified and directed. |
| 88 | S&F in Repair Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 75 mm pipe complete all as specified and directed. |
| 89 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 90 | M&L Cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) 75 mm thick in plinth protection and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed. |
| 91 | M & L 25 mm cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick levelling coarse in flooring finished even and rough complete all as specified and directed. |
| 92 | Supply only integral water proofing compound complete all as specified and directed. |
| 93 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 94 | M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6 etc complete all as specified and directed. |
| 95 | Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below complete all as specified and directed. (a) S&F drainage spout pipe GI 40 mm dia bore light grade up to outside of outer wall (appx 450 mm dia to 600 mm long) (b) M&L for PCC 1:1:5:3 type B-O (using 12.5 mm graded stone aggregate) 50 mm thick laid in slope towards drainage out spout pipe mixed with Water proofing chemical as per manufacturer instructions of MAKE : FOSROC/SIKA/PIDILITE/STP Khurra or equivalent as approved by GE 150mmx150mm (min) at appropriate location for free flow of leaked water if any drainage spouts shall be provided integrallywhile laying PCC. fixing of spout shall be done with same PCC as in this item. (C) M&L 18 mm thick cement plaster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE:301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA /PIDILITE/ FOSROC/STP as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender