Tender For Special Repair To Bldg No P-527 (08 Qtrs) Or Md Accn At Gr Line Under 51 Med Regt Under Ge Roorkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Oct 2026
6 days left
EMD
86400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-527 (08 Qtrs) Or Md Accn At Gr Line Under 51 Med Regt Under Ge Roorkee
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Sep-2026 | Revised BOQ | BOQ | 02-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness (below or above ground level) including removal of rubbish out side complex complete all as specified and directed. |
| 2 | Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed. |
| 3 | M&L 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone agg). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length. 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with mastic filling to full depth comprising a mixture of 1 part of hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) etc complete all as specified and directed. |
| 4 | M&L 25mm thick Cement concrete type B-0, (1:2:4) (12.5mm graded aggregate) as in sub floor and levelling coarse etc complete all as specified and directed . |
| 5 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 6 | M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed. |
| 7 | M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 8 | M&L precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggegrate) as in shelves and manhole cover, set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface all as specified and directed |
| 9 | Providing and fixing 16-18 mm thick granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, laid over 20 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc complete. |
| 10 | Providing and fixing 16-18 mm thick granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 15 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete. |
| 11 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0 complete all as specified and directed . |
| 12 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0 complete all as specified and directed. |
| 13 | M&L for MS T-iron/angle iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of PCC (1:3:6) complete all as specified and directed. |
| 14 | M&L Preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth, not otherwise specifically and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 15 | S&F for flush door shutters conforming to IS:2202 (Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick with necessary screws complete all as specified and directed. |
| 16 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of 150mm long complete all as specified and directed. |
| 17 | M&L Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 18 | S&F factory made gauged shutter shall be made out of angle iron 35x35x5mm (outer frame) and 25x25x5mm (middle rail 2 nos, 100 mm apart from each other) and 1.0mm thick steel sheet covering on middle rail, 10mm Square bars @ 100mm C/C fixed vertical as grill complete with stainless steel fly proof wire mesh having 0.36 mm nominal dia wire and 1.4mm average with aperture, with locking arrangement all specified and directed by Engr-in-charge. |
| 19 | M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in CM (1:3) or PCC (1:2:4) complete all as specified. |
| 20 | S&F Stainless steel of AISI-304 grade handles, fabricated type, anodised of size 150mm size long complete all as specified and directed. |
| 21 | S&F Stainless steel of AISI-304 grade barrel tower bolt 200 mm long, extruded section complete all as specified and directed. |
| 22 | S&F 100 mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 23 | S&F 300mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. |
| 24 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild teel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92x44mm & sash 32x60mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension |
| 25 | S&F for Powder coated aluminium window and ventilator, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, 3mm thick plain glass complete all as specified and directed. |
| 26 | M&L stainless steel (Grade-304) Hollow tubes, channels,etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete all as specified and directed. |
| 27 | M&L 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60, calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. |
| 28 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat Frame size 50x100 mm comprising of virgin PVC polymer of K value 58-60, calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement andscrewed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length ccomplete all as specified and directed. |
| 29 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from premises complete all as specified and directed. |
| 30 | Dismantling of floor of WC and bath not exc 300mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or Fosroc or MC Bauchemie India Pvt Ltd.(d) M&L for protection plaster 15mm thick on CM 1:3 admixed with appropriate integral water proofing compound with as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. |
| 31 | M&L vitrified ceramic light shade tiles 8-10 thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 32 | -Ditto- but as in skirting over 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 33 | M&L for glazed ceramic clour joint free tiles in vertical surface size 450x350x7mm/450x300x7mm/600x300mm x 7 mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 34 | M&L for non-skid ceramic tiles 7-10mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floor and skirting etc set and jointed in neat cement slurry and pointed in white or cloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 35 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex complete all as specified and directed. |
| 36 | M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) and finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L Rendering 5 mm thick in cement mortar 1:4 over a layer of 10mm thick rendering in cement mortar 1:6 on fair face of brick work/concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separately) |
| 38 | Supply only liquid water proofing compound complete all as specified and directed. |
| 39 | M&L Rendering 5mm thick plastering in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed. |
| 40 | M&L for complete removal of existing treatment on surfaces of wall, ceiling by scrapping down with mechanical grinder on old ceiling complete all as specified and directed. |
| 41 | M&L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed. |
| 42 | M&L prepartion of new/old treated plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon adoitives @1.43litre/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm complete all as specified and directed. |
| 43 | M&L preparation of newly/old treated plastered surfaces of walls applying with 2 coat of oil bound distemper over a coat of 1mm thick putty on wall, complete all as specified and directed. |
| 44 | M&L Preparation of plastered surfaces of walls and applying two coats of colour wash on walls complete all as specified and directed. |
| 45 | S&F in repair 25mm stainless steel curtain rod with fancy type bracket and ring complete all as specified and directed. |
| 46 | Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed. |
| 47 | Taking up or down 20 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed. |
| 48 | S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors,cutting chasses and making good with 1:3 cement mortar if necessaryetc complete all as specified and directed. |
| 49 | S&F 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, cutting chasses and making good with 1:3 cement mortar if necessary etc complete all as specified and directed. |
| 50 | Providing and fixing Iin repair White Vitreous china Orissa pattern WC pan of size 580x440 mm with integral type foot restswater closet squatting pan (Indian type WC pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 51 | Providing and fixing in repair White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer wash basin with CI brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed. |
| 52 | Providing and fixing in repair 15 mm nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 53 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 54 | S&F in repair 15 mm dia CP stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed. |
| 55 | S&F in repair PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed. |
| 56 | Providing and fixing in reapir circular shape 450 mm dia mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete all as specified and directed. |
| 57 | S&F in repair sinks made of stainless steel 01mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 58 | Providing and fixing in repair 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc complete all as specified and directed. |
| 59 | S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 60 | S&F in repair Chromium plated tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass chromium plated and fixed with brass screws complete all as specified and directed . |
| 61 | S&F in repairs 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 62 | S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) junction single, 110mm dia (double T) or unequal provided with access door complete all as specified and directed. |
| 64 | S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 65 | S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 66 | S&F in repair PVC (SWR) junction single, 75mm dia (double T) or unequal provided with access door complete all as specified and directed. |
| 67 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed. |
| 68 | S&F in repairs 75mm PVC (SWR) multi floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed. |
| 69 | Dismantling of RCC water tanks of 500 Ltr capacity and removing to store complete all as specified and directed. |
| 70 | S&F white colour Rotational moulded polyethylene water storage tank 1000 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 71 | Supply 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight 20mm - 210 gms complete all as specified and directed. |
| 72 | Taking down old existing water proofing treatment from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises including taking down of existing steel water tubing for water supply and re-fixing the same after application of roof treatment complete all as specified and directed |
| 73 | M&L Cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone agg) as in roof levelling, finished even and fair, in roof kerbs or mud stop rounded or chamfered on edge, coping etc complete all as specified and directed. |
| 74 | M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:-(a) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface.(b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.5 Kg/Sqm with non woven polyester fibre as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction.(c) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction |
| 75 | Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc. (each layer)complete all as specified and directed. |
| 76 | Demolition of Mud Phuska in roofs,any thickness including plastering and leeping of any thickness upto 30cm deep and removal of rubbish out of defence land complete all as specified and directed. |
| 77 | M&L for 10 cm thick (average) mud Phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar with phusha @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered with machine moulded tile bricks with machine moulded common burnt clay FPS (non modular) brick tiles of class designation 12.5, conforming to IS 2690 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat. |
| 78 | Extra for every additional 1 cm thickness of mud phuska. |
| 79 | S&F for factory made WPC shutter of 18 mm (+/- 0.7) thickness consisting of panel of 18 mm (+/- 0.7) thick board of density 600 Kg/Cbm using for shutter board 18 mm (+/- 0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory at all four edges of shutter using 13/6 size self tapping steel. The thickness of the shutter is edge lipped by 18 mm width x 1 mm thick PVC sheet using solvent cement etc including auto hinges,150 mm size stainless steel bright finish handle complete all as specified and directed. |
| 80 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness (below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed. |
| 81 | M&L for 75mm thick PCC( 1:4:8) ty D-2 using 40mm graded aggregate as sub base of floor complete all as specified and directed. |
| 82 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick & M-35, with grey cement and no pigment, complete all as specified and directed. |
| 83 | Supply and laying sand (25 mm thickness) for cushioning to interlocking paver block complete all as specified and directed. |
| 84 | Demolition of Brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed . |
| 85 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed |
| 86 | M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation of manholes sub base, filling and mass concrete etc complete all as specified and directed |
| 87 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregrate) as in bed to 150mm internal dia RCC/ SGSW drain pipes including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed. |
| 88 | M&L for brick work with old size sub class ‘B’ bricks in cement mortar (1:4), straight or curved on plan exc 6m mean radius built complete all as specified and directed |
| 89 | M&L for rendering 15mm thick in cement mortar (1:3) mixed with water proofing liquid on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 90 | M&L for 150mm internal dia salt glazed stone ware drain pipes, and jointed in cement mortar (1:1) complete complete all as specified and directed by Enginner-in-Charge. |
| 91 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cills, coping, bed plates, bed blocks for hold fasts, apex stones and the like with plain fair faces including weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed. |
| 92 | M&L for precast reinforced cement concrete type B-1 (1:2:4) in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed. |
| 93 | M&L TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 94 | Returning filling in with excavated soil including spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 95 | Removing excavated surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 96 | Dismantling and taking down carefully U/S copper/aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and directed. |
| 97 | Dismantling and taking down carefully sub-main wiring/ service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed. |
| 98 | Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed. |
| 99 | M&L for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-One light/fan/bell/exhaust fan point controlled by one, one-way non modular switch 5/6 Amp complete all specified and directed. |
| 100 | One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way non modular switch complete all specified and directed. |
| 101 | One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way non modular switch complete all specified and directed . |
| 102 | One light point controlled by two No. two way switch complete all as specified and directed |
| 103 | All as per item No 99 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed. |
| 104 | S&F switch piano flush type white finish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed. |
| 105 | S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed. |
| 106 | S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed |
| 107 | S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed. |
| 108 | S&F fan regulator, stepped type, electronic (socket type),100 watt compatible with BLDC FAN complete all as specified and directed. |
| 109 | S&F in replacement switch piano flush type white finish 5/6 Amps, single pole two way, 230 volts, 50 hz complete all as specified & directed. |
| 110 | S&F in replacement of bell push switch flush type 6 Amps, 240V, 50Hz, complete all as specified and directed |
| 111 | S&F in replacement of electric call bell ding dong type, AC, 240V, 50Hz, complete all as specified and directed |
| 112 | S&F lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified & directed. |
| 113 | S&F LED Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for \\"B-22 type to fix on batten holder complete all as specified and directed. |
| 114 | M&L ceiling rose 3 terminal/PVC/polycarbonate, isolated body complete all as specified & directed. |
| 115 | S&F sheet metal enclosures with metal socket and plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete ISI marked, 230/240 volts, 50 hz with one single pole MCB SP 25 Amps complete all as specified & directed. |
| 116 | S&F MCCB/MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with 200 Amps rated busbar minimum IP 43 degree of protection with built in copper bus bar of suitable size, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB/MCBs shall be measured and paid separately. |
| 117 | S&F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 100 Amps rated busbar, minimum ingress protection of IP40 complete all as specified & directed. |
| 118 | S&F MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 119 | S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 120 | S&F MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz, Ics=100% Icu with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. |
| 121 | S&F LED tube light batten 20 watts 4 fts extruded aluminuim housing, translucent diffuser with LED light source, minimum 2000 lumen, natural white, surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed. |
| 122 | S&F LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver, including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed. |
| 123 | S&F sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified & directed. |
| 124 | Ditto all as above but for 4 sqmm size |
| 125 | S&F in repair ceiling fans copper wounded with blades, down rods 230 V, 1200 mm sweep with remote control. Min air delivery 210 CFM with rating 6.00 BEE, star with brushless direct current motor (BLDC) complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard |
| 126 | S&F in repair Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep, complete with louvers including making whole and grouting of nut bolts etc and making good the disturbed sufaces complete all as specified and directed. Note: Old Exhaust fan to be deposited in MES store Yard |
| 127 | S&F Exhaust fan PVC body AC single phase 230/240 Volt of size 250 mm sweep, RPM not less than 1100 rpm complete with louvers shutter including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall complete all as specified and directed.Note: Old Exhaust fan to be deposited in MES store Yard |
| 128 | S&F in replacement electric water heater with temp regulator, storage type steel body with stainless steel inner tank and heating element upto 1.5/2 KW capacity 25 litre, BEE 5 Star rated, 240 V, 50 Hz complete with all accessories such as safety valve, thermostate, NRV, Hot and cold water connection pipe complete all as specified and directed.Note: Old Water heater to be deposited in MES store Yard |
| 129 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit (resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and aking good using PCC complete all as specified and directed. Note : - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. |
| 130 | Dismantling & taking out old unserviceable LT UG cable & Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts/ through HDPE pipe under roads of size 25 sqmm 4 core complete all as specifed and directed. Note;- The earth work shall be measured and paid sepretely under appropriate item of Sch A. |
| 131 | M&L for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/ floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 132 | S&F GI tubing light grade ISI marked of 50 mm bore dia complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender