Tender For Repair/Maint Of External Water Supply & Distribution System Pipelines And Misc Work For Dgre Under Age (I) R&D Manali.
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
16 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of External Water Supply & Distribution System Pipelines And Misc Work For Dgre Under Age (I) R&D Manali.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches in ordinary rock of required width for pipes exceeding 80mm dia but not exceeding 300mm dia including excavation for sockets, depth upto 1.5m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m complete all as specified and directed by Engr-in-charge. |
| 2 | M&L for cutting exixsting road/PCC surfaces not more than 150mm thick,removing for laying of pipes,making good with PCC 1:3:6 type C1 20 mm graded aggregate to match with the existing surface complete all as specified and directed by Engr-in-charge.Note:excavation and earthwork below 150mm depth and PCC 1:3:6 will measured and paid under relevent items of this schedule. |
| 3 | Supplying, laying, jointing, testing and commmisioning of DI Pipe of 100mm bore as per IS 8329, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches all including taking out of old unsv rusted/damaged pipes of any type complete all as specified and as directed at site.Note : - Joints shall be measured and paid separetely |
| 4 | Material and Labour for CI fittings/specials upto 100mm bore such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and directed by Engr-in-Charge. |
| 5 | Material and Labour for DI fittings/specials upto 100mm bore such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs confirming to IS: 9523 complete all as specified and directed by Engr-in-Charge. |
| 6 | Material and labour for Run lead of 100mm bore joint including jointing material for CI/DI pipe of size/bore as specified and directed. |
| 7 | Material and labour for Rubber Gasket Joint (Tyton Joint) of 100mm bore including jointing material for DI/CI pipe of following size/bore :- |
| 8 | M&L for Flanged Joints of 100mm bore with rubber or fibre board gasket including nuts, bolts and double washers complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply, fixing, jointing & testing Cast Iron Sluice Valve of 100mm bore size, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and as directed at site by the Engr-in-Charge. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 10 | Supply, fixing, jointing & testing Cast Iron Sluice Valve of 150mm bore size, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and as directed at site by the Engr-in-Charge. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 11 | Labour for cutting of CI /DI/GI pipe in position for reducing to required length for insertion of new tees, branches etc of up to 150 mm bore complete all as specified and directed by Engr-in-Charge. |
| 12 | Demolishing cement concrete (Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 13 | Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in roads,paths etc. complete all as specified and directed. |
| 14 | M&L complete overhauling/repair of defective submersible pump/Monoblock pump of capacity upto 10 HP and replacement of following spares of pumps of capacity upto 10 HP, 3 phase motor driven (excluding motor) cast iron/cast steel body complete and connecting with motor portion complete all as specified and directed. |
| 15 | CI Stage bowl. |
| 16 | GM neck ring. |
| 17 | Remetling of GM impeller turning. |
| 18 | GM DOL bush. |
| 19 | SS stud with nut. |
| 20 | Water seal |
| 21 | Revolving disc |
| 22 | EPV Impeller. |
| 23 | Impeller key. |
| 24 | Repairing of stamping of stator. |
| 25 | CI DOL piece. |
| 26 | SS coupling with key. |
| 27 | CI Suction piece. |
| 28 | GM sand guard. |
| 29 | S&F in replacement of following spares of motor of capacity upto 10 HP complete all as specified and directed. |
| 30 | GM bearing bush. |
| 31 | SS Rotor sleeve. |
| 32 | Cable seal. |
| 33 | Thrust bearing. |
| 34 | Thrust Plate |
| 35 | Sealing Ring. |
| 36 | Motor seal 10 mm |
| 37 | O ring |
| 38 | CI Lower housing. |
| 39 | CI upper housing. |
| 40 | Remetling of rotar & turning. |
| 41 | Supply,installation and comissioning in repair of dosing system consisting of 100 LTR FRP tank with lid and level gauge along with dosing pump of capacity 0-6 LPH against pressure upto 3 kg/sqcm complete with agitator with shaft and blade in SS-316 suitable for mounting on tank lid located at DGRE Pump House all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender