Tender For Repair, Replacement Of Existing Asbestos Sheet With Ppgl Sheet And Connected Works In Otm Accn At Arty Centre Nasik Road C
Tender Value
63.57 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
23 days left
EMD
1.21 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Replacement Of Existing Asbestos Sheet With Ppgl Sheet And Connected Works In Otm Accn At Arty Centre Nasik Road C
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 2 | S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint all as specified and directed. |
| 3 | S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc. all as specified and directed |
| 5 | S&F Steel work in tubular trusses/purlins and rafters including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as directed by Engr-in-charge. |
| 6 | S&F Plates (plain or chequered) / gusset plate channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E 165) all as specified and directed |
| 7 | S&F Mild steel screw bolt (Machine made ) with hexagonal or square heads at one end and screwed the other, or serewed both ends, each screwed end to be fitted with washers and one hexagonal or squqre nut, but length of bolt exc 5 cm and n exc 10 cm long and dia of bolt 5 to 10 mm complete all as specified and as directed. |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cum in hard /dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed |
| 9 | M&L cement concrete type D-2 1:4:8 ( 40 mm graded aggregate) as in foundation, filling and mass concrete all as specified and directed. |
| 10 | M&L for filling of gap portion of gable wall with PCC 1:3:6, type C-1 or brick in cement mortar of any height upto 150mm thickness filling with suitable arragement of shuttering & formwork all as specified and directed by EIC. (Note: Measurement shall be measured/paid in Running metre) |
| 11 | M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm complete all as specified and directed |
| 12 | Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed. |
| 13 | S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm with non asbestos designer type pre-painted building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction” complete all as specified and directed |
| 14 | Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed |
| 16 | M & L 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing all as specified and directed. |
| 17 | S&F chequered cement concrete tiles rubber moulded, 30 cm x 30 cm x 25 mm - 40 cm x 40 cm x 25 mm thick confirm into IS 13801-1993, 20 mm thick cement screed bed in cm 1:6 set and jointed and pointed in neat cement slurry in floors all as specified and directed (With Gray cement and no Pigment) . Please Enable Macros to View BoQ information |
| 18 | S&F chequered cement concrete tiles rubber moulded, 30 cm x 30 cm x 25 mm - 40 cm x 40 cm x 25 mm thick confirm into IS 13801-1993, 20 mm thick cement screed bed in cm 1:6 set and jointed and pointed in neat cement slurry in floors all as specified and directed (With Gray cement and no Pigment) . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender