Tender For Maintenance/Repair To Pu Joint Filling, Epoxy And Elastomeric On Taxi Track, Ptt, Disperals In Tech Area At Af Stn Bhisiana Under Ge (Af) Bhisiana
Tender Value
50 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
17 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance/Repair To Pu Joint Filling, Epoxy And Elastomeric On Taxi Track, Ptt, Disperals In Tech Area At Af Stn Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for Racking out of old existing sealant compound and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pacing the backup rod and pouring the sealant. Thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of 8 mm to 12mm dia for complete length of the joint, over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875 2003 with minimum movement accommodation factor (MAF) of+!- 30% complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for Racking out of old existing sealant compound and back up rod of the existing joints by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris . Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the sealant Thereafter filled with closed cell medium density, cross linked polyethylene foam backup rod of 12 mm to 30mm dia for complete length of the joint, over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of+!- 30% complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for Racking out of old existing sealant compound, back up rod and filler board of the existing joints by special tools like racker/cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the filler board and pouring the sealant Thereafter filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified, over it filled with closed cell medium density, cross linked polyethylene foam backup rod of 30 mm to 45mm dia and above as required for complete length of the joint. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor MAF of+/- 30% complete all as specified and as directed by Engr-in-charge.Note: 01 to 03 item: Rate quoted by bidder is deemed to be inclusive of all the equipment for removing old sealant and filling the sealant. Also, rate quoted is deemed to be inclusive of sealant, backup rod and filler board. |
| 4 | Repair to top out spelled joints, broken corners and pot holes in concrete slab by chiseling/mechical cutter to provide regular prismatic cavity with sides perpendicular and cleaning off all loose or broken materials to a distance exc 50m and not exceeding 100metre. Cleaning and washing the surface and application of surface treatment with Epoxy tar compound complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for Repair to pot holes depth & girth upto 25mm in concrete slab by Cleaning the potholes with electric blower to remove the dust particles with and including applying primer properly and leave for 30 minutes for settle down and fill with elastomeric concrete as per manufacturer's instructions and compacted with tools complete all as specified and directed by Engr-in-charge. |
| 6 | Material and labour for Repair to pot holes depth & girth 25 to 50mm in concrete slab by Cleaning the potholes with electric blower to remove the dust particles with and including applying primer properly and leave for 30 minutes for settle down and fill with elastomeric concrete as per manufacturer's instructions and compacted with tools complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender