Tender For Repair/ Maintenance Of All Type Of Steel Furniture Under Ge (West) Lucknow
Tender Value
49000
Estimated cost
Bid Submission
02 Oct 2026
15 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of All Type Of Steel Furniture Under Ge (West) Lucknow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Sep-2026 | Corrigendum | Other | 02-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH STEEL LARGE , 1/2 HANGING 1/2 SHELVES/ALMIRAH GLAZED STEEL AND ALMIRAH FOR MAP STEEL DRG NO : FD-1031, 1033 and 1034, FD-104(M) FD-106M (For Item No 01 to 11)Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg . |
| 2 | Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. |
| 3 | Taking down/out old lock cover and Supply and fixing lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg . |
| 4 | Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar and same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg . |
| 5 | Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg . |
| 6 | Taking down old unserviceable hanging rod and Supply and fixing hanging rod 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg . |
| 7 | Taking down/out old unserviceable shelves with cleat and Supply and fixing shelves with cleat made of MS plain sheet 1mm thick complete all as specified and as shown on drg. . |
| 8 | Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (Almirah Large) |
| 9 | S & F hinges of size 75mm (ISI Marked) for the shutters of almirah large steel/almirha large steel with shelves/ Glazed Almirah double shutter including removing old U/S hinges all as specified, FD-1031,1032, 1033 and 1034, FD-104(M) FD-106M . |
| 10 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover OR sand paper of Almirah Large Steel. Almirah 1/2 hanging 1/2 shelf & Almirah Glazed/steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 1 to 10 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 11 | M & L for adjustable shoe shall be provided on legs with welding 3 mm thick MS plates below legs complete rest as directed by EIC. |
| 12 | ALMIRAH MED STEEL WITH SHELVES DRG NO FD-1032(For Item No 12 to 22)Taking down/out old unserviceable handle and Supply and fixing chromium plate handle 100 mm long complete all as specified and as shown on drg . |
| 13 | Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. |
| 14 | Taking down/out old lock cover and Supply and fixing lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg . |
| 15 | Taking down/out old MS Round bar 8mm fixing with lock upper bar and below bar & same Supply and fixing of MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg . |
| 16 | Taking down old cleats and chakri and supply and fixing new cleats and chakri complete all as specified and as shown on drg . |
| 17 | S & F hinges of size 75mm (ISI Marked) for the shutters of almirah medidium steel complete all as specified and as shown on drg . |
| 18 | Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg . |
| 19 | Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg . |
| 20 | Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (Almirah Med) |
| 21 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Almirah Med Steel . Almirah 1/2 hanging 1/2 shelf cleaning of rusted surface with including parts/item repaired / replaced under items No 12 to 20 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 22 | M & L for adjustable shoe shall be provided on legs with welding 3 mm thick MS plates below legs complete rest as directed by EIC. |
| 23 | LOCKER BED SIDE STEEL : DRG NO FD-257 & FD-1029 (For Item No 23 to 29)Taking down /out old unserviceable handle and Supply and fixing chromium plate handle , 100mm long Godrej Pattern complete all as specified and as shown on drg . |
| 24 | Taking down/ out old unserviceable lock and Supply and fixing 6 lever of brass lock complete all as specified and as shown on drg. Make of lock Harison / Godrej /mydas/Link |
| 25 | Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple ,100mm size complete all as specified and as shown on drg . |
| 26 | Taking down /out old worn out legs and Supply and fixing legs of 16 gauge MS sheet with size & shape as exists complete all as specified and as shown on drg . |
| 27 | Taking down/out old unserviceable shelves and Supply and fixing shelves made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . |
| 28 | Taking down/out old unserviceable door shutter and Supply and fixing new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . (locker bed side steel) |
| 29 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Locker bed side steel . Locker Bed Side, cleaning of rusted surface with including parts/item repaired / replaced under items No 23 to 29 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 30 | TABLE DINING OR'S FD- 165m (For Item No 30 to 35Taking down old unserviceableTop and S/F New top made by 18/19mm thick HDHMR board with 22 gauge aluminium sheet on around the top shell be provied all as specified on drg and directed by Engr-in-Charge. |
| 31 | Taking down old unserviceable legs and Supply and fixing legs of size 720mm, 25mm bore made of 16 gauge MS conduit pipe throughout with shape and size as exists complete all as specified and as shown on drg .. |
| 32 | All as per serial item No 30 above but centre stiffner size 1600x25x25mm. |
| 33 | All as per serial item No 30 above but side stiffener size 480x25x1.6mm. |
| 34 | Taking down old unserviceable shoe and Supply and fixing shoe PVC to legs complete all as specified and as shown on drg . |
| 35 | Welding of cracked joints on frame ,derusting, cleaning of old surface of frame with & including parts/ item repaired/replaced under item No 30 to 35 above and applying two coats of white systhetic enamel paint over a coat of pink primer complete all as specified and as shown on drg . |
| 36 | RACK STEEL 3/4/6 TIER DRG NO FD- 106M & 1038 (For Item No 36 to 38) Taking out old unserviceable shelves and Supply and fixing new shelves made of 20 gauge MS sheet exists and applying two coats of syntetic enamel paint white over a coat of red oxide primer with size and shape as exists complete all as specified and as shown on drgs. |
| 37 | Taking down old unserviceable leg and supply and fixing new leg made of angle iron with size and shape as complete all as specified and as shown on drgs. |
| 38 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Steel . Rack steel, cleaning of rusted surface with including parts/item repaired / replaced under items No 37 to 38 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 39 | TABLE OFFICE OFFR'S STEEL/TABLE OFFICE CLK STEEL DRG NO FD- 1003 & FD-1004 (For Item No 39 to 46) Taking out old unserviceable top and supply and fixing new top of size 1680mm (L)x870mm (W)x19mm x 760mm made of 18/19 thick pre laminated HDHMR board 2mm plastic beading all round covered with the reqd gloss steel screw to frame of complete all as specified and as shown on drgs. |
| 40 | All as per serial item No 39 above but (HDHMR board 2mm plastic beading all round covered) of size 1220 (L) x610mm (W)x19mm |
| 41 | Taking out old unserviceable lock and supply and fixing new brass lock 6 lever, after removing the dents of drawers and cup board to make it functional complete all as specified and as shown on drgs. |
| 42 | Taking out old unserviceable leg and supply and fixing new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs. |
| 43 | Taking down/out old centre stiffner and supply and fixing new centre stiffner made of 1.5mm thick MS square tube with size & shape as exists complete all as specified and as shown on drgs. |
| 44 | All as per srl item No 39 above but side stiffner complte all as shown on drg. |
| 45 | Taking down old unserviceable hard rubber shoe and supply and fixing new hard rubber shoe with size & shape as exists complete all as specified and as shown on drgs. |
| 46 | Removal of denting for the deshaped portion and scraping of complete old paint by paint remover and sand paper of Table office offrs/clk steel . Table, cleaning of rusted surface with including parts/item repaired / replaced under items No 39 to 46 above. Including preparation of surface by applying putty and applying one coat of paint AD Gray /olive green synthetic enamel on the internal surfaces and hammer tex/olive green synthetic enamel on the external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 47 | TEAPOY VARANDAH (FD-288,383)(For Item No 47 to 51)Taking out old unserviceable top and supply and fixing new top of table made of18/19mm thick pre-laminated HDHMR board exterior grade of size 900x450mm, one side teak colour and another side white as 2 mm plastic beading fancy type edging all round the table complete all as specified and as shown on drgs |
| 48 | Taking out old unserviceable leg and supply and fixing new leg made out of 20mm dia MS conduit pipe having 1.5mm wall thickness with shape and size as exists and welded with frame complete all as specified and as shown on drgs. |
| 49 | Taking down U/S stiffner and S&F new stiffner made out of 10mm MS round bar bent to shape and size welded with frame all as shown on drg . |
| 50 | Taking down U/S hard rubber shoe and S&F new hard rubber shoe shape and size welded with frame all as shown on drg. |
| 51 | M& L preparation of old/new steel surface for painting and applying two coat of synthetic enamel white paint on all internal and external surface of steel and new surface over a coat of red oxide complete all as shown on drawing. |
| 52 | Chair Steel Tubular with Arms & without Arms (FD-75M)(For Item No 52 to 56)Replacement of old unserviceable seat of chair and S& F of seat made out of 1st class teak wood duly canned as per Godrej Pattern all as per drg. |
| 53 | Replacement of old unserviceable back seat and S & F back seat made out of seasoned shesham wood duly canned as per Godrej pattern |
| 54 | Replacement of old unserviceable and S & F of arms made out of seasoned shesham wood complete all as specified and as shown on drgs. |
| 55 | Replacement of old unserviceable and S&F Flat Iron Strip of 475 mm x25 mm 3 m thick welded for support to seat of Chair CB Steel complete all as specified and as shown on drgs. |
| 56 | M & L for Painting to chair steel tubular with OG Paint after smoothing of surface of chair tubular steel with arms complete all as specified and as shown on drgs. |
| 57 | Chair Verandah : Drg No - FD/MAP/12 & FD-256)(For Item No 57 to 61)Welding (Gas /Elect) of frame, 10 mm round bar , legs where as required to make its actual shape and size all as directed by Engineer-in-Charge.(DRG NO FD-256 & FD/MAP/12) |
| 58 | Preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint as per direction of Engr-in-Charge (DRG No FD-256 & FD/MAP/12) |
| 59 | Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia all as spcified and shown on drg.(FD-256 & FD/MAP/12) |
| 60 | Cutting/taking out old unserviceable cane from chair Verandah and supplying recanning of chair with white plastic cane (Oval shape) 4 mm wide and canning seat and back with 4mm wide cane as per the Matt pattern complete all as specified and as shown on drg. .(FD-256,) |
| 61 | Taking out old unserviceable PVC Seat with steffiner provided in centre and back , supply and fixing new PVC Seat & back 4MM thick with weight not less than 1.85 Kgs and grooves 90x10 No on seat & back. Complete all as specified and as shown on drg. (DRG No FD-256 & FD/MAP/12) |
| 62 | Rack Shoe Steel (FD/E6/MAP/02(R) )(For Item No 62 to 66)Welding of Main frame (legs) of Rack shoe steel shall be made of 25mm dia MS pipe (18 gauge). Top and bottom outer frame work all as per details shown in the drawing. |
| 63 | Welding of Jali shelves (05 Nos) shall be made with 3mm dis MS rods all as per details shown in the drawing. |
| 64 | All joints/welding/fixing shall be done in accordance with standard workmanship and all as shown in the drawing. |
| 65 | Taking down old U/S rubber shoe and M & L for Hard rubber/PVC shoe shall be provided to the bottom of each leg Complete all as specified and as shown on drg. |
| 66 | M& L for preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint with spray Gun Machine (Balck) complete all as specified and shown on drg No FD-E6/MAP/02 (R). |
| 67 | DESK SCHOOL TYPE 'A' DESK ADULT, DESK 4X6 :DRG NO FD-107& 124: (For Items No 67 to 76)Taking down U/S 19 mm thick back plank of box and S&F 19MM Plank made 1st class hard wood teak (MP teak) free from knoss, cracks etc. with permissible moisture contents as per the shape and size as exists complete all as specified and as shown drg. |
| 68 | All as per items No 67 but side plank. Size-19mm thick 370 x 140mm complete all as specified and as shown on drg . |
| 69 | All as per items No 67 but Top/Bottom plank. 19mm thick 365 x 800 mm complete all as specified and as shown on drg . |
| 70 | Taking down U/S legs and supply and fixing legs of 25mm tube legs size as exists complete all as specified and as shown drg. |
| 71 | All as per items No 67 but Tube Foot Rest. Size-25mm square tube steel complete all as specified and as shown on drg . |
| 72 | Taking down old U/S rubber shoe and S/F new hard rubber shoe complete rest as per drg complete as per the shape and size as exists complete all as specified and as on shown drg. |
| 73 | Taking out existing unserviceable board from Desk school and provide new HDHMR board of size 800x455x19 mm thick and screwed to fix complete all as per drg. 2 mm plastic beading provided all items. |
| 74 | Taking out unserviceable sides of board from Desk school and supply & fix new sides of HDHMR board of size 380 x 140 x 19 mm thick . Complete rest all as per drg. 2 mm plastic beading provided all items. |
| 75 | Taking out unserviceable partition from Desk school & S&F in partition made out of HDHMR board of size 370x120x19 mm thick. Complete rest all as per drg. 2 mm plastic beading provided all items. |
| 76 | Removal of denting of deshaped portion desk frame and painting with two coats of synthetic enamel 0G paint complete all as specified and as shown drg. |
| 77 | RACK PIGEON HOLES (STEEL)/ALMIRAH PIGEON HOLES: DRG NO FD-1037 (For Items No 77 to 85)Taking down 1mm thick u/ s ms Sheet from any portion of rack Pigeon Hole steel and SF new 1MM thick MS Sheet as per the shape and size as exists for LHS and RHS of Pigeon hole steel and apply one coat of refd oxide priomer complete all as per drg. |
| 78 | Taking out existing damaged MS sheet from Top of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet complete all as per drg. |
| 79 | Taking out old unserviceable lock and Supply and fixing brass lock 6 lever Godrej pattern complete all as specified and as shown on drg . |
| 80 | Taking out existing damaged MS sheet from back of rack Pigeon hole steel and supply and fixing new 1 mm thick MS steet complete all as per drg. |
| 81 | Taking down U/S legs of Angle Iron and S/F new leg made out angle iron 40X40X4MM thick Angle iron welded to 1mm thick M/S sheet all as specified and as shown drg and complete all as specified and as shown on drg. |
| 82 | Removal of denting for the deshaped portion of rack pigen holes (steel) cleaning of rusted surface with including parts/item repaired/replaced under item 77 to 82 above including preparation of patched by applying putty over two coats of paint grey/olive green systhetic enamed on the external surfaces and hammertone/olive green synthetic enamel on the external surfaces by spray gun complete all as specified and as shown on drg. |
| 83 | Taking down old U/S stainless steel strucher top and S&F 1mm thick stainless steel top design complete all as specifed and as shown on drg. |
| 84 | Taking down side U/S ball bearing and S&F heavy duty bass bearing 75 dia rubber wheel callapsable . All as specified and as shown on drg. |
| 85 | M&L denting of deshaped portion, derusting and cleaning of rusted surfaces and scraping of complete old paint by paint remover OR sand paper by including preparation of patches by applying putty etc wherever required and applying two coat of synthetic enamel paint white as required shed by spray gun on all steel surfaces complete as directed . |
| 86 | THREE SEATED STEEL CHAIR POWDER COATED(TP) (For Items No 86 to 87)Taking down old U/S sheet from chair and S&F new sheet of steel chair made out of MS Sheet duly painted with 2 coat of synthetic enamel paint powder coated size and shape exists complete all as specified and as shown on drg.Welding wherever required as directed by E-in-Incharge |
| 87 | Taking down old U/S legs and S&F new legs for three seater steel chair powder coated MS sheet duly painted with 2 coat of synthetic enalmel white paint size shap exists complete as on specified and as shown on drg.( Note- Welding wherever required as directed by E-in-Incharge) |
| 88 | Table 3x2 with and w/o drawer: FD-1008/1007 (For Items No 88 to 92) M& L for Welding wherever required as directed by E-in-Incharge |
| 89 | Replacement of existing unserviceable top and supply and fixing of new Top shall be made of 18 mm thick prelaminated EDHMR/HDHMR board BSL with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed allaround the top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg & colour of top shall be approved by EIC/GE. |
| 90 | Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, including roller channel etc. all as shown, as specified & as directed by Engr-in-Chg. |
| 91 | Taking down U/S hard rubber shoe and S&F new hard rubber shoe shape and size welded with frame all as shown on drg. |
| 92 | Taking down unserviceable lock and S&F new hard lock complete all as specified and shown on drg. |
| 93 | Table 3x3: FD-1009 (For Items No93 to 95)M& L for Welding wherever required as directed by E-in-Incharge |
| 94 | Replacement of existing unserviceable top and Top shall be made of 18 mm thick prelaminated EDHMR/HDHMR board BSL with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed allaround the top with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg & colour of top shall be approved by EIC/GE. |
| 95 | Taking down U/S hard rubber shoe and S&F new hard rubber shoe shape and size welded with frame all as shown on drg. |
| 96 | Chair Revolving /Chair computer MAP drg/TP or similar size For Items No 96 to 102) Replacement of existing unserviceable seat and S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (range of fabrics not less than Rs 650/ Rm)and mouled polyurethene foam/PU 40 Density with PVC lipping all round complete all as shown on drawing. |
| 97 | All as above item no 96 but back complete. |
| 98 | all as per item no 96 but PU arms as per drg |
| 99 | Supplying and fixing in repair of new Complete pedestal assy std quality complete all as per drg and as directed by EIC. |
| 100 | Supplying and fixing in repair of new twin wheel castors of required dia as per sample complete all as directed. |
| 101 | Supply & fix in repair new chrome free cylinder tube shall be fixed complete all as per drg and directed. |
| 102 | Supply & fix in repair new Locking lever assembely as shown in drawing complete all as directed. |
| 103 | Table Computer all type MAP drg/TP or similar size (For Items No 103 to 107)Replacement of existing unserviceable top and s&f of new Top shall be made of 18 mm thick Prelaminated EDHMR/HDHMR board BSL ,colour/shade as approved by EIC/GE and with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed allaround with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 104 | Replacement of existing unserviceable sides and s&f of new Sides with 18 mm thick Prelaminated EDHMR/HDHMR board BSL complete all as specified and as per drg. |
| 105 | Replacement of existing damaged key board and s&f of new key board made of 18 mm thick Prelaminated EDHMR/HDHMR board BSL complete with telescopic channel (make-Ebco/Ozone/Hettich) & PVC beading complete rest all as per drg & as directed by EIC |
| 106 | Replacement of existing damaged mouse board and s&f of new mouse board made of 18 mm thick Prelaminated EDHMR/HDHMR board BSL (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply/Archidply) complete with telescopic channel (make-Ebco/Ozone/Hettich) & PVC beading complete rest all as per drg & as directed by EIC |
| 107 | M& L for Painting of complete Frame by two coat of 1st grade synthetic enamel paint including all replacement of all shoes /caps complete all as directed by EIC. |
| 108 | Book case steel glazed FD/TP or similar size ( For Items No 108 to 113)Supply & fix in repair new 6 lever lock as shown in drawing complete all as directed. |
| 109 | Supply & fix in repair new CP Handle of size 100 mm as per sample as shown in drawing complete all as directed. |
| 110 | Supply & fix in repair new leg as per sample as shown in drawing complete all as directed. |
| 111 | Repairs to door with 5 mm thick glass as specified including replacement of hinges as directed by Eic |
| 112 | Repair/adjustment to existing shelf including welding as per drg and as directed |
| 113 | M&L for adjustable shoe shall be provided on legs complete all as directed by EIC. |
| 114 | Charpoy IP folding :FD-388(R ) (For Items No 114 to123)Replacement of existing damaged top and s&f of new 9/8 mm thick plywood top BWR grade as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by EIC |
| 115 | Taking down U/S hard rubber shoe and S&F new hard rubber shoe shape and size welded with frame all as shown on drg. |
| 116 | M& L for Welding work wherever required with FI as directed by EIC |
| 117 | M&L for painting with two coat of synthetic enamel paint of Charpoy IP Hard Top ( MAP) and shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all as per MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally and applying putty to level the surface before primer/painting, all as specified and shown on drgs and as directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of including BSO's Furniture Yard as directed by Engineer-in-Charge All as item No 117 as aboveCharpoy IP Hard Top: MAP |
| 118 | ditto All as item No 117 as above but Table Clk steel: FD-1004 |
| 119 | ditto All as item No 117 as above but Table 3x2 with and w/o drawer: FD-1007/1008 |
| 120 | ditto All as item No 117 as above but Table 3x3: FD-1009 |
| 121 | ditto All as item No 117 as above but Book case steel glazed |
| 122 | ditto All as item No 117 as above but Book case open type Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 15 daysOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender