Tender For Repair To Water Storage Tanks, Tank Stagings, And Other Connected Misc Water Supply Items At Palchan Under Age (I) R&D Manali.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
16 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Water Storage Tanks, Tank Stagings, And Other Connected Misc Water Supply Items At Palchan Under Age (I) R&D Manali.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work/Stone masonary manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, Complete all as specified and directed by engr-in-charge. |
| 2 | M & L for coursed rubble masonry with hard stone as in foundation, plinth using Cement mortar 1:6, complete all as specified and directed by Engr-in-charge. |
| 3 | M&L for 15 mm cement plaster on the both side and top surface of brick/stone wall in mix : 1:4 (1 cement: 4 fine sand, Complete all as specified and directed by engr-in-charge. |
| 4 | M&L for new plastered or unplastered surfaces finishing walls with Acrylic Smooth exterior paint of required shade two or more coat applied @ 1.67 ltr/10 sqm and incl necessary scaffolding, ladders , Complete all as specified and directed by engr-in-charge. |
| 5 | Excavating post holes in ordinary rocks more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto1.5 m , Complete all as specified and directed by engr-in-charge. |
| 6 | M&L for Plain cement concrete 1:3:6 (1 Cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) , Complete all as specified and directed by engr-in-charge. |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead , Complete all as specified and directed by engr-in-charge. |
| 8 | Providing and laying in position cement concrete of 1:2:4 graded stone aggregate 20 mm nominal size derived from natural sources excluding the cost of centering and shuttering - All work up to plinth level, Complete all as specified and directed by engr-in-charge. |
| 9 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead, Complete all as specified and directed by engr-in-charge. |
| 10 | M&L for structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all as specified and directed by engineer in charge |
| 11 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1 G.S. Sheet, Complete all as specified and directed by engr-in-charge. |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, Complete all as specified and directed by engr-in-charge. |
| 13 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm), Complete all as specified and directed by engr-in-charge. |
| 14 | M&L for Painting new steel surfaces applying with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint, Complete all as specified and directed by engr-in-charge. |
| 15 | Providing and fixing rectangular/cicular high density polyethylene 1000 lit water storage loft tank with cover, tripal layer ,conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includesmaking necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately, Complete all as specified and directed by engr-in-charge. |
| 16 | Providing and fixing PN - 16 Pipe, 20mm outer dia (SDR-7.4)3 layer PP-R (Poly propylene Random copolymer) pipes in repair confirming to IS 15801, UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threadedpolypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints, Complete all as specified and directed by engr-in-charge. |
| 17 | Providing and fixing PN - 16 Pipe, 25mm outer dia (SDR-7.4) 3 layer PP-R (Poly propylene Random copolymer) pipes in repair confirming to IS 15801, UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threadedpolypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints, Complete all as specified and directed by engr-in-charge. |
| 18 | Providing and fixing in repair of 20mm nomonal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) , Complete all as specified and directed by engr-in-charge. |
| 19 | Providing and fixing in repair of 25mm nomonal bore gun metal gate valve with C.I. wheel of approved quality (screwed end), Complete all as specified and directed by engr-in-charge. |
| 20 | Providing and fixing ball valve(brass) in repair of 20 mm nominal bore of approved quality, High or low pressure, with plastic floats, Complete all as specified and directed by engr-in-charge. |
| 21 | Providing and fixing ball valve (brass) in repair of 25 mm nominal bore of approved quality, High or low pressure, with plastic floats , Complete all as specified and directed by engr-in-charge. |
| 22 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, incl cleaning of tank etc. and hoisted if required reconnecting and refixing in position, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Providing and fixing C.P. brass bib cock in repair 15mm nominal bore of approved quality conforming to IS:8931, Complete all as specified and directed by engr-in-charge. |
| 24 | Providing and fixing C.P. brass stop cock in repair 15mm nominal bore (concealed) of standard design and of approved make conforming to IS:8931, Complete all as specified and directed by engr-in-charge. |
| 25 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre, Complete all as specified and directed by engr-in-charge. |
| 26 | M&L for PCC 1:4:8 (1 cement : 4 Coarse sand (Zone III) derived from natural source ; 8 graded stone aggregate 40mm nominal size derived from natural source), Complete all as specified and directed by engr-in-charge. |
| 27 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern laid in required colour & pattern over and including 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, Complete all as specified and directed by engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender