Tender For Repair, Replacement To Tiling, Plinth Protection, Joinery And Other Misc B/R Items In Old, New Map Accn In Aor Of Age B/R Lekha Nagar Under Ge Nrc
Tender Value
52 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
9 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Replacement To Tiling, Plinth Protection, Joinery And Other Misc B/R Items In Old, New Map Accn In Aor Of Age B/R Lekha Nagar Under Ge Nrc
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutter (without taking off shutters from the frames) n.exc 1.50 sqm each removing from the site complete all as specified and directed. |
| 2 | Taking down shutter of any description exc 1 sqm but n exc 2 sqm from chowkhat and removing to or from store as required complete all as specified. |
| 3 | Taking down shutter of any description exc 2 sqm from chowkhat and removing to or from store as required complete all as specified. |
| 4 | Taking down shutters of any description n.exc 1 sqm from chowkhat and removing to or from store as required complete all as specified. |
| 5 | Taking down chowkhats or frame n.exc 1.50 sqm each removing from the site complete all as specified and directed. |
| 6 | Taking down chowkhats or frame exc 1.50 sqm but n. exc 4 sqm each removing from site complete all as specified and directed. |
| 7 | Dismantling boarding, cup board shelf/shutter any description fixed in any position with nails/screw etc complete all as specified and directed. |
| 8 | M&L in repairs for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, Exc 13 Sq cm & n Exc 25 Sq cm all as specified |
| 9 | M&L in repairs for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, not Exc 3 Sq cm all as specified. |
| 10 | M&L for Block board 12 mm thick, interior grade commertial type fixed with screws to timber frame work all as specified |
| 11 | M&L for Block board 18 to 19mm thick, interior grade commercial type fixed with screws to timber frame work all as specified |
| 12 | M&L for 18 to 19mm thick prelaminated particle MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 13 | M&L for 12 mm thick prelaminated particle MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified |
| 14 | M&L for 0.9 mm thick decorative laminate type 1 of surface finished colour and pattern as approved, fixed with approved adhehive as per manufacturer's instruction all as specified |
| 15 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30/ 45 x 70 mm (single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners. |
| 16 | M&L for 18-20mm thick both side prelaminated (decorative type) solid WPC board as in kitchen cabinets, partition etc over complete all as specified and directed to make the shutters / partition / drawers/kichen cabinet etc fully functional all as specified. |
| 17 | S&F magnetic catcher fixed in repair for cupboards complete all as specified and directed by Engr-in charge. |
| 18 | S&F in repairs Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board all as per directed and specified by Engr-in-charge |
| 19 | S&F in repairs for 100 mm stainless steel handles, cast type, polished type all as specified |
| 20 | S&F in repairs for 75 mm stainless steel handles, cast type, polished type all as specified |
| 21 | S&F in repairs Telescopic runners/slider rails of Drawers closed length 500 to 600mm all as specified |
| 22 | Drilling holes of 3-5 cm dia through cuddappah stone and RCC slab together as per directed by Engr-in-charge |
| 23 | S&F IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified. |
| 24 | Dismantling of steel window/ventilators any description and any size complete all as specified and directed. |
| 25 | S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators and glazed partion frame of any size with one or more rebates including joining cleat, beading and connected accessories as required for fixing etc. complete all as specified. |
| 26 | S&F aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified.Note:work is to be executed for high rise bldgs. |
| 27 | S&F 3.0 mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5 sqm in each pane all as specified.Note:work is to be executed at any height and situation. |
| 28 | S& F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified.Note: work is to be executed at any height and situation. |
| 29 | S&F solid PVC frame of size 50 x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arrangement for fixing of glass for louver type window / ventilator and additional PVC beading around the frame for fixing of wire mesh supplying and fixing in opening all as specified & directed (note :- Glazing / wiremesh shall be measured & paid separately) |
| 30 | M&L for 3 mm thick sheet figured glass, pin headed type where is required in squares n.exc. 0.5 Sqm in each pane. Height upto four storey buildings all as specified. |
| 31 | S&F factory made of 2nd class hard wood 35mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as spfd in SSR Part-1, section 8, clause 8.24(a) complete allas specified and directed. |
| 32 | S&F for 30mm thick flush shutters, solid core construction, with particleboard core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated |
| 33 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc all as specified and as directed. |
| 34 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,suppling & fixing in the frame at site as per specification & drawing. |
| 35 | S&F mild steel flat iron for hold fasts, wall ties, hooks for hanging fans, plain angle, clamps for pipe and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed. |
| 36 | M&L PCC 1:3:6 type C-1(using 20mm graded stone agg) as in bed blocks for grouting hold fasts, coping or similar work including necessary form work complete all as specified and directed. |
| 37 | S&F 75mm butt hinges, medium weight, cold rolled mild steel all as specified. |
| 38 | S&F 100mm butt hinges, medium weight, cold rolled mild steel all as specified. |
| 39 | S&F aluminum anodised barrel tower bolts extruded section of size 150mm long (ISI Marked) in repairs complete all as specified and directed . |
| 40 | S&F 150mm long extruded aluminum alloy (fabricated type) handles anodised ISI marked complete all as specified and directed. |
| 41 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 42 | S&F for door stoper of brass 140mm body and tounge complete all as specified and directed. |
| 43 | M&L preparing surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying of two coats synthetic enamelled paint over a coat of pink primer complete all as specified and directed. |
| 44 | S&F in repair 25mm dia medium weight, stainless steel as in drapery rod complete all as specified and directed. |
| 45 | S&F stainless steel brackets colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and directed. |
| 46 | S&F stainless steel knobs colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and directed. |
| 47 | Taking up or down steel tubing and connections 15 to 20 mm bore including bib taps, stop cock etc all as specified. |
| 48 | Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) all as specified |
| 49 | S & F 15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified. |
| 50 | Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.) all as specified Please Enable Macros to View BoQ information |
| 51 | Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.) all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender