Tender For Construction Of Toilet For Handicapped Person At Inspection House Pihani.
Tender Value
4.50 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
4 days left
EMD
45000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet For Handicapped Person At Inspection House Pihani.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (loam clay,or sand) including lift upto 1.50 metre and lead upto 30 m & including filling,watering and rammlng of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches.(DSR 2023 Item No-2.6.1) (Rates are Excluding Labour Cess & GST) |
| 2 | Providing and laying in cement concrete 1:4:8 (Stone ballast 40 mm gauge nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors. (DSR 2023 Item No-4.1.6) (Rates are Excluding Labour Cess & GST) |
| 3 | First class brick work in 1:4 cement and Coarse sand o mortar in foundation plinth including supply of al materials,labour and T&P etc.required for proper completion of work. (DSR 2023 Item No-6.1.1) (Rates are Excluding Labour Cess & GST) |
| 4 | 2.5 cm thick damp proof course with cement and approved coarse sand 1:2 and including water proofing materials as ordered by the Engineer-in charge in the proportion as specified by the manufacturer including supply of all material, labour and tools and plants etc, required for proper completion of the work including proper curing and shuttering as necessary. (as per PWD SOR 2022 Item No 361) (Rates are Excluding Labour Cess & GST) |
| 5 | First Class brick work in 1:4 cement and fine sand of 1.25 F.M.mortar in the super-structure including necessary cutting and moulding of bricks as requirec and also including honey comb brick,but for wall of hal brick(41/2\\")thick.including supply of all materials labour and T&P etc.required for proper completion o the work.310a (DSR 2023 Item No-6.1.1) (Rates are Excluding Labour Cess & GST) |
| 6 | R.C.C.work with cement approved coarse sand and 2 cm.(3/4\\")gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc.and also including supply of all materials,labour and T&P etc.required for proper completion of the work binding wire cost being included in the item. (DSR 2023 Item No-5.3) (Rates are Excluding Labour Cess & GST) |
| 7 | RCC.work with cement approved coarse sand and 2cm gauge approved stone ballast in the probotion 1:1.5:3 in lintels of doors &window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.GI.binding wire and including necessary crentering &shuttering etc.and also including supply of all material labour and T&P etc required for proper completion of the work.binding wire cost being included in the item. (DSR 2023 Item No-5.3) (Rates are Excluding Labour Cess & GST) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. (as per DSR 2023 Code No 5.22A.6) (Rates are Excluding Labour Cess & GST) |
| 9 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.(as per DSR 2023 Code No 10.31) (Rates are Excluding Labour Cess & GST) |
| 10 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (as per DSR No 10.26.1) (Rates are Excluding Labour Cess & GST) |
| 11 | 12mm Cement plaster with cemenr mortar in proportion of 1 cement : 4 coarse sand for interior plastering upto floor level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even and smooth. (DSR 2023 Item No-13.4.1) (Rates are Excluding Labour Cess & GST) |
| 12 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (as per DSR 2022 Item No 22.6) (Rates are Excluding Labour Cess & GST) |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm (DSR 2023 Item No-11.4) (Rates are Excluding Labour Cess & GST) |
| 14 | Supply and fixing 6 mm (1/4\\") China white slazed thes in flooring or in skirting or Dado laid with 1:3 cement and Approved course sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (Sl. No. 6280) (DSR 2023 Item No-11.40) (Rates are Excluding Labour Cess & GST) |
| 15 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate (Rates are Excluding Labour Cess & GST) |
| 16 | S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (Rates are Excluding Labour Cess & GST) |
| 17 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading (Rates are Excluding Labour Cess & GST) |
| 18 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3.II) (Rates are Excluding Labour Cess & GST) |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and Manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) (Rates are Excluding Labour Cess & GST) |
| 20 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on work (DSR 13.98) (Rates are Excluding Labour Cess & GST) |
| 21 | Painting or varnishing on previously painted old wood or iron work including Its sand papering, rubbing and cleaning and one 21 including supply of all materials, labour and Toosl and plants etc. coat of approved superior quality ready mixed paint or varnish required for proper completion of the work. Paint to be used should comfrim the 1.S.I. No. 103 1950 (S.I. No. 643) (Rates are Excluding Labour Cess & GST) |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 22 fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Sl. No. 18.7.1,2,3) 15 mm nominal dia Pipes (Rates are Excluding Labour Cess & GST) |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 22 fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Sl. No. 18.7.1,2,3) 20 mm nominal dia Pipes (Rates are Excluding Labour Cess & GST) |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 22 fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Sl. No. 18.7.1,2,3) 25 mm nominal dia Pipes (Rates are Excluding Labour Cess & GST) |
| 25 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm dia nominal bore (Sl. No. 18.49.1) (Rates are Excluding Labour Cess & GST) |
| 26 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm dia nominal bore (SI. No. 18.50.1) (Rates are Excluding Labour Cess & GST) |
| 27 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia nominal bore (Sl. No. 18.52.1) (Rates are Excluding Labour Cess & GST) |
| 28 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm dia nominal bore (Sl. No. 18.53.1) (Rates are Excluding Labour Cess & GST) |
| 29 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (Sl. No. 18.65) (Rates are Excluding Labour Cess & GST) |
| 30 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Sl. No. 17.1.1) (Rates are Excluding Labour Cess & GST) |
| 31 | Providing and fixing wash basin with C.İ. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 29 including painting of fittings and brackets, cutting and making good the walls wherever require: (Sl. No. 17.7.1) (Rates are Excluding Labour Cess & GST) |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (Sl. No. 17.28) (Rates are Excluding Labour Cess & GST) |
| 33 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complate (SI No. 17.31) (Rates are Excluding Labour Cess & GST) |
| 34 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass Mush plpe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, Cl. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: (Sl. No. 17.5.1) (Rates are Excluding Labour Cess & GST) |
| 35 | Providing and fixing of low density Polythene approved quality water storage tank. Including cartage upto site and fixing It In position but excluding float value and other specials. (SI-230&231) 500 Liter Capacity (Rates are Excluding Labour Cess & GST) |
| 36 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform (as per DSR 2023 Code No 5.9.3) (Rates are Excluding Labour Cess & GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender