Tender For Construction Of Pink Toilet At Inspection House Hardoi.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
4 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pink Toilet At Inspection House Hardoi.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil (as per DSr 2023 Code No 2.6.1) (Rates are Excluding Labour Cess & GST) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) (as per DSR 2023 Code No 4.1.6) (Rates are Excluding Labour Cess & GST) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete (as per DSR 2023 Code No 5.9.1) (Rates are Excluding Labour Cess & GST) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (as per DSR 2023 Code No 5.2.2) (Rates are Excluding Labour Cess & GST) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 1 Cement mortar 1:4 (1 cement : 4 coarse sand) (as per DSR 2023 Code No 6.1.1) (Rates are Excluding Labour Cess & GST) |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (as per DSR 2023 Code No 2.25) (Rates are Excluding Labour Cess & GST) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) (as per DSR 2023 Code No 6.4.1 ) (Rates are Excluding Labour Cess & GST) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers (as per DSR 2023 Code No 5.9.5) (Rates are Excluding Labour Cess & GST) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (as per DSR 2023 Code No 5.3) (Rates are Excluding Labour Cess & GST) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform (as per DSR 2023 Code No 5.9.3) (Rates are Excluding Labour Cess & GST) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. (as per DSR 2023 Code No 5.22A.6) (Rates are Excluding Labour Cess & GST) |
| 12 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.(as per DSR 2023 Code No 10.31) (Rates are Excluding Labour Cess & GST) |
| 13 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (as per DSR 2023 Code No 13.4.1 ) (Rates are Excluding Labour Cess & GST) |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (as per DSR 2023 Code No 13.80) (Rates are Excluding Labour Cess & GST) |
| 15 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (as per DSR 2023 Code No 13.81.1) (Rates are Including Labour Cess but Excluding GST) |
| 16 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (as per DSR 2023 Code No 13.47.1) (Rates are Excluding Labour Cess & GST) |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (as per DSR 2023 Code No 8.31) (Rates are Excluding Labour Cess & GST) |
| 18 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (as per DSR 2023 Code No11.40) (Rates are Excluding Labour Cess & GST) |
| 19 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement (as per DSR 2023 Code No 11.20.1) (Rates are Excluding Labour Cess & GST) |
| 20 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With aver age thickness of 120 mm and minimum thickness at khurra as 65 mm (as per DSR 2023 Code No 22.7.1) (Rates are Excluding Labour Cess & GST) |
| 21 | Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish (as per DSR 2023 Code No 13.113.1) (Rates are Excluding Labour Cess & GST) |
| 22 | Supply and fixing of hexagonal fan box with approximate 80 mm in length fabricated from 16 SWG MS sheet in corporating 10 mm dia MS round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid on the RCC roof before concreting along with supply of all material albour & T & P(as per PWD SORE S. No. 1149) (Rates are Excluding Labour Cess & GST) |
| 23 | Providing & fixing of water closet squatting pan (Indian type WC Pan) with 100mm sand cast iron P or S trap, 10 ltr low level white PVC flushing cistern including flush pipe with amnually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls & floors wherever required. White Vitreous China Orrisa Pattern WC pan of size 580x440 mm with integral type footrest (as per DSR 2023 Code No 17.1.1). (Rates are Excluding Labour Cess & GST) |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (as per DSR 2023 Code No 17.3.1) (Rates are Excluding Labour Cess & GST) |
| 25 | White Vitreous China Wash basin size 615x510 mm with a pair of 15 mm C.P. brass pillar taps. (as per DSR 2023 Code No 17.7.3) (Rates are Excluding Labour Cess & GST) |
| 26 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (as per DSR 2023 Code No 17.8) (Rates are Excluding Labour Cess & GST) |
| 27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern (as per DSR 2023 Code No 17.4.1) (Rates are Excluding Labour Cess & GST) |
| 28 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (as per DSR 2023 Code No18.53.1) 15mm nominal bore (Rates are Excluding Labour Cess & GST) |
| 29 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter (as per DSR 2023 Code No 12.41.2) (Rates are Excluding Labour Cess & GST) |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes (as per DSR 2023 Code No 18.7.2) (Rates are Excluding Labour Cess & GST) |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes (as per DSR 2023 Code No 18.7.3) (Rates are Excluding Labour Cess & GST) |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal dia Pipes (as per DSR 2023 Code No 18.7.5) (Rates are Excluding Labour Cess & GST) |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (as per DSR 2023 Code No 18.48) (Rates are Excluding Labour Cess & GST) |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore(as per DSR 2023 Code No 18.18.2) (Rates are Excluding Labour Cess & GST) |
| 35 | Providing and fixing PPR Unions PPR Union 20mm (asper DSr 2023 Code No 18.6A.1) (Rates are Excluding Labour Cess & GST) |
| 36 | Supply and fixing of C.P. brass waste jali including all including supply of all materials labours T&P etc.complete. (as per DSR 2023 Code No 1951) (Rates are Excluding Labour Cess & GST) |
| 37 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore (as per DSR 2023 Code No 18.21.1.1) (Rates are Excluding Labour Cess & GST) |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. (as per DSR 2023 Code No 17.28.2.1) (Rates are Excluding Labour Cess & GST) |
| 39 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. (as per DSR 2023 Code No 18.15.1) (Rates are Excluding Labour Cess & GST) |
| 40 | Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms (as per DSR 2023 Code No 18.56.1) (Rates are Excluding Labour Cess & GST) |
| 41 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms (as per DSR 2023 Code No 17.69.1) (Rates are Excluding Labour Cess & GST) |
| 42 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore (as per DSR 2023 Code No 18.52.1) (Rates are Excluding Labour Cess & GST) |
| 43 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (as per DSR 2023 Code No 18.65) (Rates are Excluding Labour Cess & GST) |
| 44 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (as per DSR 2023 Code No 17.31) (Rates are Excluding Labour Cess & GST) |
| 45 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M. S. tube (as per DSR 2023 Code No 10.26.1) (Rates are Excluding Labour Cess & GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender