Tender For Special Repairs To Roof, Walls, False Ceiling, Toilet, Door And Sanitary Fitting Arrangement For Ug Block Building In The Tamilnadu Dr.Ambedkar Law University At Perungudi, Chennai
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2026
16 days left
EMD
32800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Roof, Walls, False Ceiling, Toilet, Door And Sanitary Fitting Arrangement For Ug Block Building In The Tamilnadu Dr.Ambedkar Law University At Perungudi, Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away the existing old and damaged Plastering including Clean removal of Cement plaster from walls ., complete complying with standard specification and as directed by the departmental Officer. |
| 2 | Dismantling, clearing away the existing old and damaged Pressed Tiles & Weathering Course and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the departmental Officer. |
| 3 | Dismantling, clearing away the Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs etc.,complete complying with standard specification |
| 4 | Dismantling, clearing away the existing old and damaged partition, doors including removal of frames, hinges and fastenings and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the departmental Officer. |
| 5 | Dismantling, clearing away the existing damaged false ceiling arrangements and clearing the debris away from the site etc,complete complying with standard specification and as directed by the departmental officers. |
| 6 | Providing PU (Polyurethane) grouting through injection for water proofing of leaky RCC ceiling by using skilled labours. The damaged leaky ceiling should be treated with wire brush and remove the loose mineral particles dirt etc. and clean it with jet water. After cleaning the drilling pits of 10-15mm of dia and 6-8 inches depth to be created for PU injection. The drilling holes should be inclined at 45 degree. The drilling pits should be installed with injection parts to with stand the injection pressure. The PU material of approved quality and brands directed by the departmental officers shall be filled in pits with adequate pressure using mechnical pumps. Dry the PU material up to 12hrs to fill the cracks in the structure. After that clean the surface and finish it with packing material and as directed by the departmental officers. The rate is inclusive of cost of materials, labour charges, transporting charges etc., complete as directed by the departmental officers., The materials quality approved by the departmental Engineer before use of work |
| 7 | Finishing the top of roof with one course of machinepressed tiles of following size of approved quality set inCement Mortar 1:3 (One Cement and Three Crushedstone Sand) 12mm thick mixed with water proofingcompound conforming to ISS at 2% by weight of cementused and the joints pointed neatly to full depth of tileswith the same cement mortar mixed with red oxide andwater proofing compound including curing etc., completecomplying with standard specification and as directed bythe departmental officers |
| 8 | Pressed tiles are washing completely to remove theFungus and Algae. The damaged tiles joints should becleaned with wire brush and remove the loose particlescleanly with jet water. The adhesive and Polimers shallbe filled in tiles joints fully till it penetrate in depth andclean the surface neatly. The rate is inclusive of cost ofmaterials, labour charges, transporting charges etc.,complete as directed by the departmental officers., Thematerials quality approved by the departmental Engineerbefore use of work |
| 9 | Renewing and fixing of GYP Board false ceiling using 12.5 mm thick of approved quality and design suspended from the ceiling using \\"U\\" shaped Galvanised iron channels at 1.20 M centre to centre on both longitudinal and cross direction for vertical support and fixing \\"U\\" shaped G.I channels at 0.90 m centre to centre on longitudinal direction respectively for horizontal support by using T.W reapers at corners and at intermediately and fixing of plaster of paries on the panel provided as per design / patttern given by the site officer and finishing the ceiling surface with some plaster of paries materials etc. Necessary openings should be made for providing spotlights, florescent tubes in the ceiling by using plywood 12 mm thick and opening should be covered with Acrylic panel complying with standard specification and as directed by the departmental officers etc. complete. All the materials should be got approved before use on work by the Executive Engineer.The rate is including two coats of plastic emulsion painting over the wall coat primer etc., complete. |
| 10 | Providing and fixing 10 mm thick fully designed perforated calcium silicate board (Hilux) including supplying and fixing true horizontal level false ceiling with 24mm prelude grid system Using hot dipped galvanised steel section exposed surface chemically cleaned caping prefinished inbacked polyester paint wall angle of size 3000x19x19 mm used in the periphery of the ceiling fixed to the wall, parttion with the help of screws at 600mm c/c. Main runner of size 3000x24mm suspended at a1200mm c/c by using securely fixed to the structural soffit of RCC slab by using 6mm Nylon Rwl plug at every 1200mm (max) and 1200mm long cross tee of size 1200x24mm to interlocked between main runner at 600mm c/c(max) to form a grid of size 1200x600mm. 600mm long cross tee of size 600x24mm is inserted to form a grid. |
| 11 | Providing and Filling the tile joint with epoxy grout with following specification:Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc. complete. |
| 12 | Plastering with Cement Mortar 1:5 (One cement and FivePlastering sand), 12mm thick in all floors including mortarplasticizer at 200ml per 50Kg of cement used curing etc.complete complying with standard specification and asdirected by the departmental officers. |
| 13 | Flooring with ceramic tiles of following size and varietyconforming to IS 15622 laid over cement mortar bed of20 mm thick in cement mortar 1:3 (One Cement andThree crushed stone Sand) with required Cement Slurryand Mortar Plasticizer including cutting the tiles to therequired size with special cutter wherever necessary,laying in position and pointing with Water Resistant TileEpoxy Grout at the rate of 0.27 Kg. / sq.m. etc., completecomplying with standard specification and as directed bythe departmental officers. (The make and brand of thetiles should be got approved by Executive Engineerbefore use on works) |
| 14 | Supplying and Fixing of Wood Polymer Composite(WPC) door with solid door frames extruded with size75mmX50mm. The Inner core made of rigid WPCcompound with minimum shore hardness of 55, and BuldDensity 750Kg/cub.Mt. The frame shall be fixed to thewall using 10X10mm long MS screw throught the frameby using PVC fasteners. A minimum of 4nos screww tobe provided for each vertical members,Door shutter of25mm thick Wood Polymer Composite (WPC) singlecore Extruded Door Shutter, with one side digital printingof Specified Design which is approved by engineer-InCharge. Both side of the shutter shall have rough sugartexture finish, aminated with UV oil. The solid WPCboard shall have minimum shore hardness of 55 andBulk density 550Kg/Cub.Mt moulding the thicknessremains 25mm(+/-1mm) etc complete as per thedirection of the departmental officers |
| 15 | Repairing the UPVC ventilator including labour chargesfor removing and refixing of grill the same in positionand including the cost Pin headed glass, Louver Bladeand Cap , with screws and fixing including labourcharges etc., complete with standard specification andas directed by the departmental officers., The materialsquality approved by the departmental Engineer beforeuse of work. |
| 16 | Repairing the UPVC Window including removing andrefixing of grill & the same in position and including thecost of door handle with screws, 10\\"Friction stay, Espag1000 MM and fixing including labour charges etc.,complete with standard specification and as directed bythe departmental officers., The materials qualityapproved by the departmental Engineer before use ofwork |
| 17 | Supplying and fixing of M.S.grill of approved design foropen courtyard, grill, grill work to doors and windowopenings etc., using necessary mild steel flats for innerand outer members which should be fixed on edgesincluding cutting the members, welding, grinding, onecoat of priming coat using best approved quality redoxide primer, dismantling of walls / concrete if necessary,fixing and finishing the dismantled portion to originalcondition etc., complete complying with standardspecification. |
| 18 | Hydraulic Door closer of various sizes of approvedquality using Aluminium Extruded section body tubulartype universal hydraulic door closer with double speedadjustment like HARDWYN (make) 'GAZEL' (or)equivalent (with ISI Monogram) |
| 19 | Clearing surface thoroughly with water and removing anyloose plaster, flacks, fungus growth etc., by suitablemechanical means like scrapping or wire brushing andwashing with adequate water to get and absolutelycleaned surface. Opening Cracks and Sealing with HighStrength Adhesives.Apply two Coat of SP ConcareCement Based Water proofing Base Coat as Primer.After drying 2 Coats of SP Concare Food GradeEpoxy.Coating Application by Brush / Roller only. Ratequoted is inclusive of preparation of surface, whichincludes cleaning of surface polymer mortar curing,labour, tools and equipment, etc. complete with standardspecification and as directed by the departmentalofficers., The materials quality approved by thedepartmental Engineer before use of work |
| 20 | Painting iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with two coatsof best approved first quality and colour of syntheticenamel paint over the existing red oxide priming coat inall floors excluding cost of priming coat etc., completecomplying with standard specification. (The make, qualityand colour of paint should be got approved by theExecutive Engineer before use on works). |
| 21 | WATER SUPPLY & SANITARY ARRANGEMENTS |
| 22 | Supplying and fixing in position 15mm dia following taps(heavy duty) of approved make conforming to BISspecifications and quality including cost of shellac,thread, etc., complete complying with standardspecification and including cutting and threadingwherever necessary.(Taps should be got approved bythe Executive Engineer before use on the works) |
| 23 | 15mm dia SS Long body Tap |
| 24 | 15mm dia CP Health faucet and Biptap |
| 25 | Supplying and fixing approved best quality brass CPtowel rail 600mm long of approved make With bracketsof same materials including cost of teak wood plugs andCP screws,etc., complete complying with standardspecifications. (The tower rail should be got approved byExecutive Engineer before use on works). |
| 26 | Supplying and fixing best approved best quality brass CPsoap tray of size 150 x 150mm including cost of teakwood plugs, brass screws, etc., complete complying withstandard specifications. (The soap tray should be gotapproved by Executive Engineer before use on works). |
| 27 | Supplying UPVC Specials in water supply arrangements(both in internal and external water supply arrangements |
| 28 | UPVC Elbow |
| 29 | 32mm dia |
| 30 | UPVC Reducer |
| 31 | 50x40mm dia |
| 32 | Supplying and fixing in position Indian make bevellededge mirror of approved quality and brand PVC / FibreGlass framed 600 x 450 x 5.5mm thick mirror, shelf typewith hard board backing of approved colour fixed withbrass screws, rawl plug, etc., complete complying withstandard specification. (The mirror should be gotapproved by the Executive Engineer before use on woks) |
| 33 | Supplying and fixing in position best quality andapproved make colour glazed earthernware wash handbasin of size 550 x 400mm (with/without pedestal) with apair of cast iron brackets, including cost 15mm dia brassCP pillar tap, 32mm dia \\"B\\" class GI waste pipe withrubber plug and chain, 15mm dia GM wheel valve, 15mmbrass nipple, 15mm dia nylone connection, 32mm dia CPbrass waste coupling including fixing of wash basin usingCI brackets on to the wall in position with TW plugs andscrews, rubber washers, white lead and giving necessarywater supply connection and painting the brackets withtwo coat of painting over a priming coat of anti-corrosivepaint including testing for leakages etc., completecomplying with standard specification and as directed bythe departmental officers. (The wash hand basin andspecials should be got approved by the ExecutiveEngineer before use on works). |
| 34 | Supplying and fixing in position White / Colour GlazedModel Floor Mounted European Water Closet of bestquality and approved make with 100mm “P” or “S” trapconnecting with CI pipe of 100mm dia / PVC pipe of110mm dia, double flapped rigid PVC black seat andseat cover with CP brass hinges including cost of whitecement, cement for packing, spun yarn, teak wood plugs,brass screws, etc., including supplying and fixing 10 litrescapacity PVC /12.5 litres capacity porcelin low levelflushing tank with a pair of CI brackets, etc., completewith all fittings, such as, 15mm brass ball valve withpolythene float with brass handle, union couplingconnected by means of 40mm white PVC flush handusing indian adopter joint including all internal fittings,such as, 15mm bras connections, 15mm GM wheelvalve, 15mm brass nipple (2 Nos.), 15mm nylonconnection, TW plugs, screws and also giving necessaryconnection to the PVC pipe and painting the CI bracketswith 2 coats of approved paint over one coat of red oxideprimer, dismantling the masonry and re-doing thedismantled masonry to original condition,etc., completecomplying with standard specifications. (The EWC andflushing tank with all accessories should be got approvedby the Executive Engineer before use on works) |
| 35 | Supplying and fixing in position urinal flat back, back inletwhite glazed earthern ware of best approved quality withG.I. Pipe connection of suitable length, 32mm bellmouthed PVC connection, concealed stop valve 5089and fixing the urinal to the wall in position with necessaryT.W.plugs, clamps, screws, shellac etc., includingdismantling masonry if necessary and redoing the sameto original condition and checked without any lealagecomplete complying with standard specifications.TheUrinal should be got approved from the ExecutiveEngineer before use on work. |
| 36 | Supplying and fixing if marble of 0.61*1.22m.,18/20mmthick in all floors for urinal partition including for labourcharges for fixing and polishing etc., |
| 37 | Refixing the PVC soil / waste pipes of various dia having6 kg / sq.cm. pressure including labour charges forrefixing to wall with special PVC / MS clamp, teak woodplugs, brass screws, etc., complete complying withstandard specifications. |
| 38 | 75 mm dia PVC soil waste pipe |
| 39 | 110 mm dia PVC soil waste pipe |
| 40 | 160 mm dia PVC soil waste pipe |
| 41 | Supplying, laying and jointing UPVC pipes of approvedquality and best variety conforming to BIS of thefollowing dia including cutting, threading and fixing UPVCspecials using UPVC adhesives (but excluding cost ofsuch specials) and fixing into wall with teak wood plugs,SS clamps and screws making holes on the wall (or)drilling holes in the roof and making good the dismantledportion to original condition with necessary brick work /cement concrete and plastering neatly wherevernecessary with necessary scaffolding charges upto 4metre height above ground level, etc., completecomplying with standard specifications. The UPVC pipesshall be got approved by Executive Engineer before useon works. |
| 42 | 20 mm dia |
| 43 | 32 mm dia |
| 44 | Renewing and refixing with new ones connection hose ofapproved quality and make including labour for fixing inposition etc complete complying with standardspecification and as directed by the departmental officersat site of work. |
| 45 | Renewing and refixing with new ones waste hose ofapproved quality and make including labour for fixing inposition etc complete complying with standardspecification and as directed by the departmental officersat site of work. |
| 46 | Renewing and refixing with new ones wash basin wastecoupling of approved quality and make including labourfor fixing in position etc complete complying withstandard specification and as directed by thedepartmental officers at site of work. |
| 47 | Supplying & fixing the new Flushing tank of best andapproved quality 10 litre capacity PVC flushing tank fixedon to wall and make including labour charges for fixingin position etc complete complying with standardspecification and as directed by the departmental officersat site of work. |
| 48 | Renewing and refixing with new syben set of approvedquality and make including labour for fixing in position etccomplete complying with standard specification and asdirected by the departmental officers at site of work. |
| 49 | Renewing the damaged Angle Cock with new AngleCock of best and approved quality of Roca Makeincluding fixing inposition with solvent cementetc,complete. |
| 50 | Renewing the damaged damaged steel gratings withnew one of steel gratings including labour charges forfixing in position etc. complete. |
| 51 | Supplying & fixing in Position of PVC Water tank ofapproved by quality conforming to ISI specification 2000litres capacity having inlet,outlet,overflow and drainagepipe arrangements and make including labour chargesfor fixing in position with all necessary accessories andtransporting at site of work., complete complying withstandard specification and as directed by thedepartmental officers at site of work. |
| 52 | Clearing surface thoroughly with water and removing anyloose plaster, flacks, fungus growth etc., by suitablemechanical means like scrapping or wire brushing andwashing with adequate water to get and absolutelycleaned surface. Followed by Opening the Cracks withDry Cut Machine 10mm depth and 10 mm Width andSealing it with Cement Grout/Adhesive / MicroConcrete.Followed by one Coat of Acrylic Mixing withCement as Primer.Followed by 2 Coats of SP Concarewater proofing Coat etc.,complete complying withstandard specification and as directed by thedepartmental officers at site of work. |
| 53 | Painting Old Plastered Wall Surface with Two finishingcoats of ready mixed (Emulsion) of approved quality andcolour over the existing wall in all floors etc., completecomplying with standard specification and as directed bythe departmental officers. (The make, quality and colourof paint should be got approved by the ExecutiveEngineer before use on works) |
| 54 | Supplying and fixing in position of polycarbonate sheetroofing with following specification. The roofing made of10mm thick multi wall polycarbonate sheet with approvedcolour double sided UV coated using MS frame workconsists of main truss MS square pipe for vertical supportin the base plates and Top conneceting plate for fixingtruss. The rate including cost of 10mm thick multi wallpolycarbonate sheet, MS truss work, MS verical supportpillars, Horizontal purlins, Aluminium plate for bottom &top with sealent for all joint of sheets and labour chargesfor all febrication works and sheet fixing work andnecessary Scaffolding cost and painting work for all MSTruss with purlin etc., completed. and as directed by thedepartmental officers |
| 55 | Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of speicals such on large plate, shoe, carcher, coupling, bolt and nut transportation charges and handling charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base as per the standard specification and as directed by the departmental officers. |
| 56 | Initial 3m Height |
| 57 | For every additional 2.5m height |
| 58 | Making through holes in Plain or Reinforced CementConcrete with Diamond Core Drilling System by usingBOSCH power tools of following diamete - Depth per cm |
| 59 | Collecting the scattered debries from the campus andconveying away the same to outside by lorry to a lead of3 km.(Entirely within city limit) including loading unloading charges and dumping in low places and levellingneatly etc. complete. |
| 60 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender