Tender For Providing And Installation Of Single Phase Submersible Motor Pump Set And Laying Of G.I. Pipe Line In Varrious Place At Ward No. 35 (No Of 3 Moter Pump Set & Gi Pipe Line)
Tender Value
4.21 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
15 days left
EMD
8450
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ujjain → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Single Phase Submersible Motor Pump Set And Laying Of G.I. Pipe Line In Varrious Place At Ward No. 35 (No Of 3 Moter Pump Set & Gi Pipe Line)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying & Installation of Energy efficient Five Star BEE rating ISI Marked required capacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\\"/6\\" tube well with Contral Panel Starter suitable for Submersible pump with dry run protection, connections, including submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. Make - Kirloskar, falcon, Texmo, Luby make)2 HP Head Mt. 163-58Discharge LPM 10-45 MPPHED SOR Ist Sep. 202311.2/P-164 |
| 2 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.2.5 Sq.mm.multi strand11.5/P-165 |
| 3 | Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor11.6/P-165 |
| 4 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/14151/12786/13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/HydraulicJacks/But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed)32 mm diaUADD SOR VOL. - I 2nd Aug. 20217.1/103 |
| 5 | Providing, Supplying and laying Blue MDPE (medium density polyethylene) pipes conforming to ISO 4427 : 1996 manufactured from virgin resin PE 80 Food grade compounded RawMaterial having Blue Colour only with quality assurance certificate from quality agencies like CIPET (India) andother recognisedagencies for usage in Drinking Water System. The cost shall include testing of all materials, Inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. 25mm dia7.11.1.2 |
| 6 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 25mm dia6.8.3/P-90 |
| 7 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) 25mm dia6.27.3/P-95 |
| 8 | Supply of XLPE Insulated power cable (conforming IS-7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade, 2 core/3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor ARMOURED 2 Core 10 Sq.mm.(XLPE)UADD SOR VOL. - IV 2nd Aug. 202114.1.2.4/P-78 |
| 9 | Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle, 10 kAValue AC supply confirming to IS: 8828 : 1996, IEC: 60898:2002 but without enclosures DOUBLE POLE (DP) 6 Amp to 32 Amp Rating8.5.3.2/P-41 |
| 10 | Dismantling of cement concrete pavement i/c breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead upto 1000 meter, stacking serviceable and unserviceable materials separately and as per relevant clauses of section-200. UADD SOR VOL. - I 2nd Aug. 202118.12/229 |
| 11 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed All kinds of ordinary soil18.2.1/P-227 |
| 12 | Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.18.2.8/P-228 |
| 13 | Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate 18.14.3/P-229 |
| 14 | Providing laying and jointing of galvanised Iron Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete./Medium6.1/P-88 |
| 15 | 15mm dia |
| 16 | 32mm dia |
| 17 | Providing and fixing full way gate valves tested to 21.00 kg/sq.cm./Screwed6.3/P-88 |
| 18 | 15mm dia |
| 19 | 32mm dia |
| 20 | Providing and fixing class-I Globe wheel valves, tested to 21.09 kg/sq.cm./Screwed6.5/P-89 |
| 21 | 15mm dia |
| 22 | 32mm dia |
| 23 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm./Screwed6.8/P-90 |
| 24 | 15mm dia |
| 25 | 32mm dia |
| 26 | Providing & fixing water taps/Stainless Steel 15mm dia6.17.1/P-92 |
| 27 | Providing and fixing G.I. Union in G.I. pipe line including cutting and threading the pipe and making long screws etc complete (new work) :6.22/P-93 |
| 28 | 15 mm diameter pipe. |
| 29 | 32 mm diameter pipe. |
| 30 | Providing and fixing G. I. socket in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.25/P-94 |
| 31 | 15mm dia |
| 32 | 32mm dia |
| 33 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.27/P-95 |
| 34 | 15mm dia |
| 35 | 32mm dia |
| 36 | Providing and fixing G. I. Tee in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.29/P-96 |
| 37 | 15mm dia |
| 38 | 32mm dia |
| 39 | Providing and fixing G. I. Elbow in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)6.31/P-96 |
| 40 | 15mm dia |
| 41 | 32mm dia |
| 42 | Providing and fixing G. I. Nipple of minimum length 100mm in G.I. Pipe line i/c cutting, threading, testing and carriage etc. complete (Old work)6.33/P-97 |
| 43 | 15mm dia |
| 44 | 32mm dia |
| 45 | Providing and fixing wrought steel Cap Plug with threading in G.I. Pipe line testing etc. complete (New & Old Work)6.35/P-98 |
| 46 | 15mm dia |
| 47 | 32mm dia |
| 48 | Providing and fixing G. I. Cross with outer threading in G.I. Pipe line i/c cutting threading testing etc. complete6.37/P-98 |
| 49 | 15mm dia |
| 50 | 32mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender