Tender For Construction Of Ladies Toilet In Tlm Sub-Divisions Under Se(Eht-Maint.) Circle At Ee(Eht-M) Division Jabalpur & Seoni, Ae Tlm Office Jabalpur,Gadarwara,Seoni,Balaghat & Chhindwara.
Tender Value
17.41 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
11 days left
EMD
41092
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ladies Toilet In Tlm Sub-Divisions Under Se(Eht-Maint.) Circle At Ee(Eht-M) Division Jabalpur & Seoni, Ae Tlm Office Jabalpur,Gadarwara,Seoni,Balaghat & Chhindwara.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Ladies Toilet in TLM Sub-Divisions under SE(EHT-MAINT.) Circle at EE(EHT-M) Division Jabalpur & Seoni, AE TLM Office Jabalpur,Gadarwara,Seoni,Balaghat & Chhindwara. |
| 2 | 2.6, Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 3 | 2.27.1, \\"Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete...With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)\\" |
| 4 | 4.1.2.3 , \\"Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :..With 40mm nominal size graded stone aggregate..M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate....\\" |
| 5 | 5.16.6 , \\"Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detalingIS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers. 3.Couplers shall be conforming to IS code on \\"Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification\\")..Thermo-Mechanically Treated bars.FE 500 D or more conforming to IS 1786..\\" |
| 6 | 5.1.1 , \\"Providing and laying in position specified grade of reinforced cement concrete (nominal / design mix with 20mm nominal size graded stone aggregate) excluding the cost of centering,shuttering, finishing and reinforcement -All work up to plinth level :..M-20 Grade Concrete\\" |
| 7 | 5.9.1 , \\"Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Foundations, footings, bases of columns, etc. for concrete upto plinth level\\" |
| 8 | 5.9.2.1 , \\"Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc...Uptoplinthlevel\\" |
| 9 | 6.5.2 , \\"Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete...Cement mortar 1:6 (1 cement : 6 sand)\\" |
| 10 | 5.16.6 , \\"Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detalingIS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:- 1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers. 3.Couplers shall be conforming to IS code on \\"Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification\\")..Thermo-Mechanically Treated bars.FE 500 D or more conforming to IS 1786..\\" |
| 11 | 5.3.1 , \\"Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate)in beams, suspended floors, roofs havingslope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstaircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement inconcrete grade...M-20 Grade Concrete\\" |
| 12 | 5.9.5 , \\"Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Lintels, beams, girders, bressumers and cantilevers\\" |
| 13 | 5.9.3 , \\"Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Suspended floors, roofs, landings, balconies and access platform..\\" |
| 14 | 6.7.1.1, \\"Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in :..Having 100 kg / cm2 average compressive strength..\\" |
| 15 | 13.2.2 , \\"15 mm cement plaster on the rough side of single or half brick wall of mix..1:6 (1 cement : 6 sand) \\" |
| 16 | 13.3.2 , \\"20 mm cement plaster of mix :..1:6 (1 cement : 6 sand)\\" |
| 17 | 13.8, 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) |
| 18 | 13.46, Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 19 | 13.67.1 , Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. |
| 20 | 13.67.2 , With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. |
| 21 | 13.64, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 22 | 9.109.2 , \\"Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:..250x16 mm\\" |
| 23 | 9.110.2 , \\"Providing and fixing aluminium towerbolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:.300x10 mm\\" |
| 24 | 9.113.1 , \\"Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:.125 mm\\" |
| 25 | 9.7.2 , \\"Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in.charge and panelling with panels of:..12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming toIS : 3087 bonded with BWP type symthetic resin adhesive as per IS : 848 and pre-lamination conforming to IS : 12823 Grade1, Type - II marked:.\\" |
| 26 | 9.43.1 , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 27 | 11.49, Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 28 | 11.50, Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 29 | 13.53, Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 30 | 13.41, Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of Chief Engineer will be required. |
| 31 | 21.1.2.2 , \\"Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved .make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, .including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .:For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required .including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for .separately)..Powder coated aluminium (minimum thickness of powder coating 50 micron) .\\" |
| 32 | 18.28, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 33 | 18.6.2.2 , \\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in-Charge..Concealed work including cutting chases and making good the walls etc...20 mm nominal outer dia .Pipes..\\" |
| 34 | 18.6.2.3 , \\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in-Charge..Concealed work including cutting chases and making good the walls etc...25 mm nominal outer dia. Pipes.\\" |
| 35 | 18.7.2, \\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe and fittings with onestep CPVC solvent cement, trenching, refilling andtesting of joints complete as per direction of Engineer-in- Charge..External Work..20 mm nominal outer dia. Pipes..\\" |
| 36 | 18.12.1.1 , \\"Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end)..25 mm nominal bore\\" |
| 37 | 18.34, Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore |
| 38 | 18.33, Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gm, 15 mm nominal bore |
| 39 | 17.59.1.2 , \\"Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...Coupler..110 mm\\" |
| 40 | 19.9.1.1 , \\"Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design..Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks.\\" |
| 41 | 17.11.2 , \\"Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :..White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap..\\" |
| 42 | 19.32.1 , \\"Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete :..100 mm dia\\" |
| 43 | 19.22, Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. |
| 44 | 17.75, Providing and fixing CP brass soap dish of approved quality and make |
| 45 | 17.67, Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 46 | 17.73.1, \\"Providing and fixing CP brass towel rail of approved quality and make..600x20mm\\" |
| 47 | 12.32.2 , \\"Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm)\\" |
| 48 | 17.2.1 , \\"Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting andmaking good the walls and floors wherever required :..W.C. pan with ISI marked white solid plastic seat and lid\\" |
| 49 | 27.8.2.2 , \\"Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :-..Double pole..MCB DP 6Amp to 32Amp 10kA rating\\" |
| 50 | 4.1.1.2 , \\"Point wiring (excluding metallic switch box &sheet but including switches, sockets, lamp.holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi.strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of.suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of.green colour inside conduit, screwless connector for joints etc. as required as per.specification for :-..Light point/fan points..Primary medium point.Using flush type normal accessories\\" |
| 51 | 4.3.1, \\"Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification.2x2.5 Sq.mm. ..Using modular accessories\\" |
| 52 | 30.4.3, \\"Supplying, erection and testing of approved make 'Fresh air fan' AC 230-250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required...300 mm sweep bush type\\" |
| 53 | 31.3.4 , \\"Supply and fixing Led tube rod comprising of LED tube with non.integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job...Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body,.PC diffuser.\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender