Tender For Development Of Distribution Infrastructure At Churachandpur, Pherzawl, Tamenglong, Noney And Jiribam Districts Of Manipur Under The Rev Ed Reforms-Based And Results-Linked, Distribution Sector Scheme.
Tender Value
54 Crore
Estimated cost
Bid Submission
05 Oct 2026
4 days left
EMD
1.08 Crore
Bank guarantee accepted
Document Fee
25000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Development Of Distribution Infrastructure At Churachandpur, Pherzawl, Tamenglong, Noney And Jiribam Districts Of Manipur Under The Rev Ed Reforms-Based And Results-Linked, Distribution Sector Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | 11kV Feeder (Reconductoring) |
| 2 | 9.0 m S.T.P.(410:SP-31) |
| 3 | Galvanised Pole top bracket |
| 4 | Galvanised Clamp for Pole top Bracket |
| 5 | Galvanised Cross arm(75X40)mm |
| 6 | Galvanised Back clamp for X-arm |
| 7 | Galvanised 2.2m D.P. channel X-arm (75X40)mm |
| 8 | 11 KV Disc. Insulator (Complete set i/c Tension clamps,Hardware) |
| 9 | 11 KV Insulator with Pin |
| 10 | ACSR Conductor (Rabbit) |
| 11 | Isolator with X-arm etc. |
| 12 | Stay Set complete with stay wire, base plate, stay rod etc. |
| 13 | Galvanised Stay Clamp |
| 14 | Galvanised Bracing for D.P.structure, 50X50X6mm M.S. Angle |
| 15 | Galvanised Clamp for D.P. Bracing |
| 16 | Galvanised Anti climbing device complete |
| 17 | Earthing set complete with G.I. wire |
| 18 | Guarding at crossing with G.I. wire |
| 19 | Nuts, Bolts, MS flat as support for item No. 3 jointing sleeves etc. |
| 20 | Al. Binding wire, UPG clamps etc. |
| 21 | Sundries like pole painting, Danger plate, Number Plate etc. |
| 22 | AB Cable - replacement of LT bare conductors |
| 23 | AB Cable (3X95+1X70) sq.mm and Steel Tubular Pole (Horizontal Configuration) |
| 24 | 8.0 m S.T.P.(410:SP-14) |
| 25 | M.S. cross arm (75X40) mm, 510 mm long |
| 26 | Back clamp for cross arm |
| 27 | Dead end fittings for AB Cable with bare messenger wire complete with Eye hook as per Construction Standards : |
| 28 | Suspension fittings for AB Cable with bare messenger wire complete with Eye hook as per Construction Standards : |
| 29 | AB Cable (3x95+1x70)Sq.mm |
| 30 | SMC Box for 200 Amps 300x200x100 box size minimum alongwith 25X8 Aluminium Bus Bar for 3 phase connection of 4 Nos. |
| 31 | Insulation piercing connector suitable for AB Cable (95/70 Sq.mm. Main & Branch) as per TS & Construction Standard. |
| 32 | Earthing set complete with G.I. wire. |
| 33 | G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.) |
| 34 | Stay set complete with stay wire and insulator clamp etc. |
| 35 | Bolts & Nuts with washer |
| 36 | Sundaries,Pole painting, Danger plate, Number Plate etc. |
| 37 | AB Cable (3X70+1X50) sq.mm and Steel Tubular Pole (Horizontal Configuration) |
| 38 | 8.0 m S.T.P.(410:SP-14) |
| 39 | M.S. cross arm (75X40) mm, 510 mm long |
| 40 | Back clamp for cross arm |
| 41 | Dead end fittings for AB Cable with bare messenger wire complete with Eye hook as per Construction Standards : |
| 42 | Suspension fittings for AB Cable with bare messenger wire complete with Eye hook as per Construction Standards : |
| 43 | AB Cable (3x70+1x50)Sq.mm |
| 44 | SMC Box for 200 Amps 300x200x100 box size minimum alongwith 25X8 Aluminium Bus Bar for 3 phase connection of 4 Nos. |
| 45 | Insulation piercing connector suitable for AB Cable (70/50 Sq.mm. Main & Branch) as per TS & Construction Standard. (Main Connector & Neutral Connector). |
| 46 | Earthing set complete with G.I. wire. |
| 47 | G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.) |
| 48 | Stay set complete with stay wire and insulator clamp etc. |
| 49 | Bolts & Nuts with washer |
| 50 | Sundaries,Pole painting, Danger plate, Number Plate etc. |
| 51 | AB Cable (3X50+1X35) sq.mm and Steel Tubular Pole (Horizontal Configuration) |
| 52 | 8.0 m S.T.P.(410:SP-14) |
| 53 | M.S. cross arm (75X40) mm, 510 mm long |
| 54 | Back clamp for cross arm |
| 55 | Dead end fittings for AB Cable with bare messenger wire complete with Eye hook as per Construction Standards : |
| 56 | Suspension fittings for AB Cable with bare messenger wire complete with Eye hook as per Construction Standards : |
| 57 | AB Cable (3x50+1x35)Sq.mm |
| 58 | SMC Box for 200 Amps 300x200x100 box size minimum alongwith 25X8 Aluminium Bus Bar for 3 phase connection of 4 Nos. |
| 59 | Insulation piercing connector suitable for AB Cable (70/50 Sq.mm. Main & Branch) as per TS & Construction Standard. (Main Connector & Neutral Connector). |
| 60 | Earthing set complete with G.I. wire. |
| 61 | G.I. wire. No 10 S.W.G. (90 Kg. per 1.09Km.) |
| 62 | Stay set complete with stay wire and insulator clamp etc. |
| 63 | Bolts & Nuts with washer |
| 64 | Sundaries,Pole painting, Danger plate, Number Plate etc. |
| 65 | 11 kV MVCC (Medium Voltage Conductor Cover) (30 CKm) |
| 66 | AL 59 ACS (52.88 sq. mm.) Rabbit conductor covered |
| 67 | Tension clamp for 11kV |
| 68 | IPC (for connecting bare to CC) |
| 69 | IPC (for connecting CC to CC) |
| 70 | Insulated Cable Tie |
| 71 | Mid Span Joint |
| 72 | 11kV Feeder (Reconductoring) (242.39 cKm) |
| 73 | Detailed Route survey for new lines and submission of route profile/alignment etc. all complete |
| 74 | Jungle clearance including tree cutting along the line including trimming, loaping, branching etc as required to maintain staturory electrical clearance as per the direction of Engineer-in-charge |
| 75 | Dismantling of existing infrastructure |
| 76 | Erection of Single Pole 9m including excavation in all kinds of soils, concreting of foundations as per approved drawing, painting of poles concreting of foundations as per approved drawing, painting of poles (including Pole muffing, Painting etc) complete as per Technical Specification |
| 77 | Erection of Double Pole 9m including excavation in all kinds of soils, concreting of foundations as per approved drawing, painting of poles (including Pole muffing, Painting etc) complete as per Technical Specification |
| 78 | Fitting & fixing of all line accessories like cross arms, channels, brackets, danger board, anticlimbing device (including supply of nuts&bolts,etc.) complete as per specification for Single Pole. |
| 79 | Fitting & fixing of all line accessories like cross arm, DP channels, DP cross brackets, all types of clamps,danger board, anticlimbing device etc. complete (including supply of nuts&bolts,GI through bolt,etc) as per specification for Double Pole Structure |
| 80 | Pipe Earthing including fixing of 1mtr long GI pipe in all kinds of soils complete as per approved drawing and Technical Specification 1set/location |
| 81 | Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification |
| 82 | Stringing of line (3 wires) including paying out and sagging of conductor, and mid point jointing of ACSR Rabbit conductor, installation of disc/ pin insulator alongwith all necessary hardwares and accessories as per Technical Specification. |
| 83 | Installation of Isolator with X-arm etc. |
| 84 | AB Cable - replacement of LT bare conductors |
| 85 | AB Cable (3X95+1X70) sq.mm and Steel Tubular Pole (Horizontal Configuration) (77 cKm) |
| 86 | Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification |
| 87 | Dismantling of existing infrastructure |
| 88 | Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification |
| 89 | Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole. |
| 90 | Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete. |
| 91 | Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification |
| 92 | Stringing of LT AB Cable (3x95+1x70 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, consumer service connection with IPC etc. complete in all respect as required as per Construction Standard |
| 93 | Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge |
| 94 | AB Cable (3X70+1X50) sq.mm and Steel Tubular Pole (Horizontal Configuration) (183 ckm) |
| 95 | Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification |
| 96 | Dismantling of existing infrastructure |
| 97 | Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification |
| 98 | Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole. |
| 99 | Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete. |
| 100 | Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification |
| 101 | Stringing of LT AB Cable (3x70+1x50 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, consumer service connection with IPC etc. complete in all respect as required as per Construction Standard |
| 102 | Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge |
| 103 | AB Cable (3X50+1X35) sq.mm and Steel Tubular Pole (Horizontal Configuration) (131 ckm) |
| 104 | Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification |
| 105 | Dismantling of existing infrastructure |
| 106 | Erection of Single Pole including exacavation in all kinds of soils, muffing of Poles as per approved drawing, painting of poles (including supply of concreting materials and paints,etc) complete as per Technical Specification |
| 107 | Fixing of all line accessories like cross arm, channels, brackets, danger board, anticlimbing device etc. complete as per specification for Single pole. |
| 108 | Fixing of G.I. Earth Spike (1800 x 20 mm) with 6 SWG/8 SWG GI wire, all accessories for earthing complete. |
| 109 | Erection of stay set including stay pit excavation, concreting, stone/ earth filling, ramming, fixing of stay wire, insulator complete as per specification |
| 110 | Stringing of LT AB Cable (3x50+1x35 sq.mm.) including installation of clamps for attachment of ABC to pole and all accessories including Distribution Box, jointing and termination, danger plate, consumer service connection with IPC etc. complete in all respect as required as per Construction Standard |
| 111 | Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge |
| 112 | 11 kV MVCC (Medium Voltage Conductor Cover) (30 CKm) |
| 113 | Detailed Route Survey, investigation including peg marking, profiling / alignment of route etc. complete as per Technical Specification |
| 114 | Dismantling of existing infrastructure |
| 115 | Stringing of line (3 wires) including paying out and sagging of conductor, and mid point jointing of AL 59 ACS (52.88 sq. mm.) Rabbit conductor covered, installation of tension clamp for 11 KV, IPC and insulated cable tie alongwith all necessary hardwares and accessories as per Technical Specification. |
| 116 | Supply Portion |
| 117 | Erection Portion |
| 118 | BoQ2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender