Housing Urban and Rular Development Government Departments Closing in 6 days TDR #57481241

Tender For Repair / Maintenance Of Admn Block And Repair And Upgraddation Of Drainage System From New Block To Main Drain At District Jail Kathua.(C. No.07-B)

Issued by Government Departments · Kathua, Jammu and Kashmir
Tender Value
14.93 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
29860
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair / Maintenance Of Admn Block And Repair And Upgraddation Of Drainage System From New Block To Main Drain At District Jail Kathua.(C. No.07-B)

BOQ

Name of Work:- Repair / maintenance of Admn Block and Repair and Upgraddation of drainage system from new block to main drain at District Jail Kathua.(C. No.07-B)
Sl. No. Item Description
1Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead
215 mm cement plaster on single or half brick wall of mix 1:4 (I cement : 4 fine sand) with a floating coat of neat cement finish.
3Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle and other fixtures as required............ in plain Beveled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
4Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 ........... all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with gypsum moisture resistant board
5Providing and fixing roller blinds (Zebra) of approved make, colour and shade ……… complete job as directed by EIC.
6Providing and fixing in position AC-4 wooden flooring planks of approved make and shade …. Complete job including cost of 8 mm thick foam sheet tobe fixed below the flooring planks and all other accessories and fixtures required for fixing the flooring as directed by EIC., including dismantling of existing damaged wooden flooring and disposal of scrap material.
7Engagement of labourers, Massons, Carpenters, Welders, Sweepers, Plumbers, Electricians for various repair works like disposal of malba, dismantling work, repair to wood work, cleaning etc.as directed by EIC.
8Labours
9Electrician
10Providing and fixing in position PVC wall pannelling and ceiling (super heavy in walls) of approved brand, colour and shade including cost of all fittings and fixtures complete
11Providing and fixing in position PVC wall louvers of superior and approved make and shade/colour including cost of all fittings and fixtures (beading, u-beading, etc.) ….. Complete including costs and carriages of all materials involved upto work site.
12Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood
13Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood
14Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
15Extra for providing and fixing flush doors with decorative veneering instead of non-decorative ISI marked flush door shutters On one side only
16Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
17Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
18Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering with C.C. (1:3:6) (1 cement : 3 coarse sand : 6 Cr. Stone Agg) . All works upto plinth level.
19Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
20Finishing walls with acrylic smooth exterior emulsion like apex or equivalent of required shade on new work (two or more coats) over and including priming coat of exterior primer applied @ 2.20 Kg/10 sq.m.)
21Renewing glass panes, with wooden fillets wherever necessary with Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
22Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed 50 meter beyond 1 m from cutting edge
23Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
24Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering with C.C. (1:4:8) (1 cement : 4 coarse sand : 8 Cr. Stone Agg) . All works upto plinth level
25Centering and shuttering including strutting, propping etc and removal of form for:
26Foundations, footings, bases of columns etc. for mass concrete.
2715mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 : 4 ( 1 cement : 4 fine sand)
28Carriage of materials by mechanical means :
29Carriage of sand 20 Km by M.T..
30Carriage of stone aggregate 10 Km by M.T.
31Wiring for light/Fan point with 1.5 sq.mm FRPVC insulated copper cable in surface /recessed medium class PVC conduit with suitable G.I. Box, modular type switch complete.
32Wiring for circuit/submain wiring of FRPVC insulated copper conductor cable.
332x1.5 sq.mm.
342x2.5 Sq.mm.
35Providing and fixing of following modular type switch/socket combined of make Anchor Roma or equivalent.
365/6 A
3715/16 A
38Providing and fixing of following type MCB's/switch gear of L&T, Anchor or equivalent make 63A-SPN
39Providing and fixing tube light T5 20w of make like orient , havells or equivalent.
40Providing and fixing modular stepped type fan dimmers.
41Providing and fixing ceiling fan Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57481241
AUTHORITY Government Departments
TENDER VALUE 14.93 Lakhs
LAST DATE 21-09-2026
Authority
Authority Name Jammu And Kashmir Police Housing Corporation
Work Description Tender for Repair / Maintenance Of Admn Block And Repair And Upgraddation Of Drainage System From New Block To Main Drain At District Jail Kathua.(C. No.07-B)
Basic Detail
Tender No 07 of PHC JAMMU DIV/2026-27 Dated-11-09-2026
Bidding Type Tender
Location
City Kathua
State Jammu and Kashmir
Key Dates
Publish Date 11 Sep 2026
Submission Date 21 Sep 2026
Open Date 22 Sep 2026
Finance
Tender Value 14.93 Lakhs
Tender Fee 1000
EMD 29860
Exemption Not Available
Document List
BOQ_1094042.xls
cb5003ac-ddcf-4194-af35-e555c2f17f21.html
Tendernotice_1 (19).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Sep 22, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1094042.xls

html

cb5003ac-ddcf-4194-af35-e555c2f17f21.html

pdf

Tendernotice_1 (19).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders