Tender For Renovation Of Electrical Installation Work In Confidential Section At 9Th Floor Of Public Service Commission, West Bengal.
Tender Value
4.62 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
9259
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Electrical Installation Work In Confidential Section At 9Th Floor Of Public Service Commission, West Bengal.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 2 | 12 way , Double door |
| 3 | Supplying and fixing following rating, double pole, 240V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A. |
| 4 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing andcommissioning etc. as required. Single pole |
| 5 | Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS/HFFR PVC insulatedcopper conductor single core cable in surface/recessed medium class PVC conduit, with piano typeswitch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 sq.mm.FRLS/HFFR PVC insulated copper conductor singlecore cable etc. as required. Group C |
| 6 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.Group A |
| 7 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. [DSOR (E&M)-2025 Page-9/1.38] |
| 8 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. [DSOR (E&M)-2025 Page-8/1.30] |
| 9 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. [DSOR (E&M)-2025 Page-8/1.29] |
| 10 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite /perspex top cover incl. making necy. connections etc.(E-6/18a) |
| 11 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E-7/25) |
| 12 | Supply & Fixing 240 V, 3 nos. 20A plug socket with separate 3 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mmthick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E-8/30) |
| 13 | Supplying and fixing PVC batten/ angle holder including connections etc. as required [DSR (E&M)-2025, P-11/1.58] |
| 14 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 15 | a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire [DSR (E&M)-2025, P-3/1.14.1] |
| 16 | b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire [DSR (E&M)-2025, P-3/1.14.3] |
| 17 | c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire [DSR (E&M)-2025, P-4/1.14.4] |
| 18 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 19 | a) 1.5 sqmm |
| 20 | b) 2.5 sqmm (F-5/9-i) |
| 21 | c) 4 sqmm (F-5/9-ii) |
| 22 | d) 6 sqmm (F-5/9-iii) |
| 23 | Supply & Fixing 240 V, 25A Modular type socket, 25 A,Modular type starter (Brand approved by EIC) with 25AModular switch type DP MCB (C-Curve) and 6 Module GIModular type switch board with 6 Module top cover plateflushed in wall incl. S&F switch board and cover plate andmaking necy. connections with PVC Cu wire and earthcontinuity wire etc.(E-19/18) |
| 24 | Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. [DSR-em- P-9,1.42] |
| 25 | Supplying & Delivery of 9W LED Bulb. (Make: Signify/Crompton/Wipro) |
| 26 | Supplying and delivery of LED Industrial Batten light made of CRCA Sheet Body (Thickness ≥ 0.50 mm) and construction as per relevant IS, along with LED lamp (Opal finish polycarbonate housing with Aluminium end-cap) voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range 0o to 40o C, internal surge protection of 2.5 KV(internal) with Short & Open circuit protection , THD < 10% , P. F.≥0.9, IP20, CRI >80, and minimum 40000 Burning Hours (Life projection shall be calculated as per TM-21 methodology), CCT 5700°K /6500°K, and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing, with Minimum 5 year OEM warranty. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. (System lumen efficacy ≥115 lm/Watt (Make: Signify / LT / Wipro) |
| 27 | Twin fittings along with S/F of 2 no. 18-20 W LED lamps as per specification |
| 28 | Disconnection & dismantling existing old Electrical installation, Electrical fitting/fixtures etc with owns tools & takles incl. mending good damages and clearing/removing from the site and handed over to the authority or as directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender