Tender For Renovation Of Toilet In Dic, Ludhiana
Tender Value
7.34 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
11 days left
EMD
14695
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of Toilet In Dic, Ludhiana
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 3 | Providing and fixing in position 5 mm thick bevelled edge miror of superior glass (of approved make) complete with 4 mm thick hard board backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge) |
| 4 | Size 550mm x 400mm |
| 5 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 6 | Providing and fixing in position vitreous Chinaware white lIndian make large flat backor angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of theEngineer-in-charge) consisting of C.P. brassUrinal waste Coupling dome type 32mmouter length 75 mm , C.P. brass UrinalSpreader Ocular-Regular and C.P. brasstube connection 300 mm long complete. |
| 7 | Vitreous white Chinaware Partition |
| 8 | Small partitions size 69 x 16.5 x 32.5 cm |
| 9 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 10 | C.P brass towel ring |
| 11 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 12 | Supplying and fixing well cap having thread to fix on housing pipe complete in all respect. 250mm internal diameter |
| 13 | C.P.brass 15mm Angular stop cock with Wall flange |
| 14 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 15 | C.P.brass 15mm Angle valve without flange |
| 16 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect |
| 17 | PVC tube connection of size 15 mm x 600 mm with C.P. Brass nut |
| 18 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge |
| 19 | SDR 11 CPVC pipes & fittings 20mm o/d |
| 20 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. |
| 21 | 110mm o/d PVC pipe of 4 Kgf. / sqcm |
| 22 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 23 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 24 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 25 | For 110mm o/d pipes |
| 26 | P Trap/Floor Trap 110mm x 110mm |
| 27 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 28 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 29 | Brass Ball Cock with rod and Plastic Ball |
| 30 | 25mm i/d |
| 31 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 32 | Size 550 mm x 400 mm x 815 mm |
| 33 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 34 | Vitreous chinaware standard white pedestal for wash hand basin. |
| 35 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. |
| 36 | With C.P. Brass nut |
| 37 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 38 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 39 | Triple Layer Tanks |
| 40 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 41 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 42 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/ Semi Matt/ Glosy/ Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 43 | Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand) |
| 44 | Providing and Fixing FMD Door Sintex make complete with chowkhat and Aluminium fitting complete in all respects. |
| 45 | Size 3'-0\\" x 7'-0\\" |
| 46 | Size 2'-6\\" x 7'-0\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender